annotate tests/test-exchange-obsmarkers-case-D1.t @ 3494:14cd04ff968e

evolve: show the updated working directory after `hg evolve --continue`

`hg evolve` shows a nice message about the new working directory when the evolve
ends but if the evolve is interrupted by conflicts and you continue the evolve
resolving the conflicts, that nice message is lost. Let's have that in case of
`--continue` too.

============================================
Testing obsolescence markers push: Cases D.1
============================================

Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).

This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.

Category D: Partial Information Case
TestCase 1: Pruned changeset based on missing precursor of something not present
Variants:
# a: explicite push
# b: bare push

D.1 Pruned changeset based on missing precursor of something not present
========================================================================

.. {{{
..   B ⊗
..     |
..   A ◌⇠◔ A'
..     |/
..     ● O
.. }}}
..
.. Markers exist from:
..
..  * `A ø⇠o A'`
..  * B (prune)
..
.. Command run:
..
..  * hg push -r A'
..  * hg push
..
.. Expected exchange:
..
..  * `A ø⇠o A'`
..  * B (prune)

Setup
-----

  $ . $TESTDIR/testlib/exchange-obsmarker-util.sh

initial

  $ setuprepos D.1
  creating test repo for test case D.1
  - pulldest
  - main
  - pushdest
  cd into `main` and proceed with env setup
  $ cd main
  $ mkcommit A0
  $ mkcommit B
  $ hg up -q 0
  $ mkcommit A1
  created new head
  $ hg debugobsolete `getid 'desc(A0)'` `getid 'desc(A1)'`
  obsoleted 1 changesets
  1 new orphan changesets
  $ hg prune -d '0 0' 'desc(B)'
  1 changesets pruned
  $ hg strip --hidden -q 'desc(A0)' --config devel.strip-obsmarkers=no
  $ hg log -G --hidden
  @  e5ea8f9c7314 (draft): A1
  |
  o  a9bdc8b26820 (public): O
  
  $ inspect_obsmarkers
  obsstore content
  ================
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (*) {'user': 'test'} (glob)
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (*) {'ef1': '*', 'user': 'test'} (glob)
  obshashtree
  ===========
  a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04 0000000000000000000000000000000000000000
  e5ea8f9c73143125d36658e90ef70c6d2027a5b7 163059af30d498e215e86e1ead6ab749521c38be
  obshashrange
  ============
           rev         node        index         size        depth      obshash
             1 e5ea8f9c7314            0            2            2 163059af30d4
             0 a9bdc8b26820            0            1            1 000000000000
             1 e5ea8f9c7314            1            1            2 163059af30d4
  $ cd ..
  $ cd ..

  $ cp -R D.1 D.1.a
  $ cp -R D.1 D.1.b

Actual Test (explicit push)
---------------------------

  $ dotest D.1.a A1
  ## Running testcase D.1.a
  # testing echange of "A1" (e5ea8f9c7314)
  ## initial state
  # obstore: main
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (*) {'ef1': '*', 'user': 'test'} (glob)
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (*) {'user': 'test'} (glob)
  # obstore: pushdest
  # obstore: pulldest
  ## pushing "A1" from main to pushdest
  pushing to pushdest
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  remote: 2 new obsolescence markers
  ## post push state
  # obstore: main
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (*) {'ef1': '*', 'user': 'test'} (glob)
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (*) {'user': 'test'} (glob)
  # obstore: pushdest
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (*) {'ef1': '*', 'user': 'test'} (glob)
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (*) {'user': 'test'} (glob)
  # obstore: pulldest
  ## pulling "e5ea8f9c7314" from main into pulldest
  pulling from main
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  2 new obsolescence markers
  new changesets e5ea8f9c7314
  (run 'hg update' to get a working copy)
  ## post pull state
  # obstore: main
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (*) {'ef1': '*', 'user': 'test'} (glob)
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (*) {'user': 'test'} (glob)
  # obstore: pushdest
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (*) {'ef1': '*', 'user': 'test'} (glob)
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (*) {'user': 'test'} (glob)
  # obstore: pulldest
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (*) {'ef1': '*', 'user': 'test'} (glob)
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (*) {'user': 'test'} (glob)

Actual Test (base push)
---------------------------

  $ dotest D.1.b
  ## Running testcase D.1.b
  ## initial state
  # obstore: main
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (*) {'ef1': '*', 'user': 'test'} (glob)
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (*) {'user': 'test'} (glob)
  # obstore: pushdest
  # obstore: pulldest
  ## pushing from main to pushdest
  pushing to pushdest
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  remote: 2 new obsolescence markers
  ## post push state
  # obstore: main
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (*) {'ef1': '*', 'user': 'test'} (glob)
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (*) {'user': 'test'} (glob)
  # obstore: pushdest
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (*) {'ef1': '*', 'user': 'test'} (glob)
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (*) {'user': 'test'} (glob)
  # obstore: pulldest
  ## pulling from main into pulldest
  pulling from main
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  2 new obsolescence markers
  new changesets e5ea8f9c7314
  (run 'hg update' to get a working copy)
  ## post pull state
  # obstore: main
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (*) {'ef1': '*', 'user': 'test'} (glob)
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (*) {'user': 'test'} (glob)
  # obstore: pushdest
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (*) {'ef1': '*', 'user': 'test'} (glob)
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (*) {'user': 'test'} (glob)
  # obstore: pulldest
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (*) {'ef1': '*', 'user': 'test'} (glob)
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (*) {'user': 'test'} (glob)