annotate tests/test-exchange-obsmarkers-case-B6.t @ 3754:73ee40cbfb53

evolve: return the new replacement node to be stored in evolvestate

While resolving phase-divergence, we can end up obsoleting the phase-divergent
commit in favor of the public commit. Before this patch we return the node of
public commit to store as a replacement of the phase-divergent commit.

The above will not cause any problem till the time we use `hg evolve --abort` on
an interrupted evolve which tries to strip the replacement nodes because it
thinks that the replacements nodes are the ones which are created during the
resolution and are new.

Since we will be stripping a public node, `evolve --abort` will error out saying
cannot strip public changeset, unable to abort evolve which is bad.

We should make sure, replacements should only consist of new nodes formed. If
the instablity is resolved by obsoleting in favour of old changeset, we should
not store the old changeset in replacements in evolvestate.

============================================
Testing obsolescence markers push: Cases B.6
============================================

Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).

This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.

Category B: pruning case
TestCase 6: Pruned changeset with precursors not in pushed set

B.6 Pruned changeset with precursors not in pushed set
======================================================

.. {{{
..   B ø⇠⊗ B'
..     | |
..   A ○ |
..     |/
..     ● O
.. }}}
..
.. Marker exist from:
..
..  * `B ø⇠⊗ B'`
..  * B' prune
..
.. Command run:
..
..  * hg push -r O
..
.. Expected exchange:
..
..  * `B ø⇠⊗ B'`
..  * B' prune

Setup
-----

  $ . $TESTDIR/testlib/exchange-obsmarker-util.sh

Initial

  $ setuprepos B.6
  creating test repo for test case B.6
  - pulldest
  - main
  - pushdest
  cd into `main` and proceed with env setup
  $ cd main
  $ mkcommit A
  $ mkcommit B0
  $ hg up --quiet 0
  $ mkcommit B1
  created new head
  $ hg debugobsolete `getid 'desc(B0)'` `getid 'desc(B1)'`
  obsoleted 1 changesets
  $ hg prune -qd '0 0' .
  $ hg log -G --hidden
  x  f6298a8ac3a4 (draft): B1
  |
  | x  962ecf6b1afc (draft): B0
  | |
  | o  f5bc6836db60 (draft): A
  |/
  @  a9bdc8b26820 (public): O
  
  $ inspect_obsmarkers
  obsstore content
  ================
  962ecf6b1afc94e15c7e48fdfb76ef8abd11372b f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'prune', 'user': 'test'}
  obshashtree
  ===========
  a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04 86c0915d87bd250d041dcb32e46789b6f859686b
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 90eb403e560458149d549c4a965c0c2b81fe0cbb
  962ecf6b1afc94e15c7e48fdfb76ef8abd11372b 6758dc37fbd86f9625196ba95b8b76ec8c72e73d
  f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 ce7933a7b712bc438ea1881c2b79c6581618245c
  obshashrange
  ============
           rev         node        index         size        depth      obshash
             1 f5bc6836db60            0            2            2 000000000000
             0 a9bdc8b26820            0            1            1 86c0915d87bd
             1 f5bc6836db60            1            1            2 000000000000
  $ cd ..
  $ cd ..

Actual Test
-------------------------------------

  $ dotest B.6 O
  ## Running testcase B.6
  # testing echange of "O" (a9bdc8b26820)
  ## initial state
  # obstore: main
  962ecf6b1afc94e15c7e48fdfb76ef8abd11372b f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'prune', 'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing "O" from main to pushdest
  pushing to pushdest
  searching for changes
  no changes found
  remote: 2 new obsolescence markers
  ## post push state
  # obstore: main
  962ecf6b1afc94e15c7e48fdfb76ef8abd11372b f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'prune', 'user': 'test'}
  # obstore: pushdest
  962ecf6b1afc94e15c7e48fdfb76ef8abd11372b f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'prune', 'user': 'test'}
  # obstore: pulldest
  ## pulling "a9bdc8b26820" from main into pulldest
  pulling from main
  no changes found
  2 new obsolescence markers
  ## post pull state
  # obstore: main
  962ecf6b1afc94e15c7e48fdfb76ef8abd11372b f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'prune', 'user': 'test'}
  # obstore: pushdest
  962ecf6b1afc94e15c7e48fdfb76ef8abd11372b f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'prune', 'user': 'test'}
  # obstore: pulldest
  962ecf6b1afc94e15c7e48fdfb76ef8abd11372b f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'prune', 'user': 'test'}