annotate tests/test-evolve-stop-orphan.t @ 3846:f9dad99a90d5

evolve: create a new commit instead of amending one of the divergents

This patch changes the behavior of evolve command while resolving
content-divergence to create a new commit instead of amending one of the
divergent ones.

In past, I have made this change, backed out this change and now today again I
am doing this change, so let's dive in some history.

Using cmdrewrite.amend() was never a good option as that requires hack to delete
the evolvestate and also gives us less control over things. We can't make the
commit on top of different parents as that of content-divergent ones. Due to all
these, I first made this change to create a new commit instead of amending one.

But, after few days, there was flakiness observed in the tests and turned out
that we need to do some dirstate dance as repo.dirstate.setparents() does not
always fix the dirstate. That flakiness was a blocker for progress at that time
and we decided to switch to amend back so that we can have things working with
some hacks and we can later fix the implementation part.

Now, yesterday while tackling resolving content-divergence of a stack which is
as follows:

C1 C2
 | |
B1 B2
 | |
A1 A2
 \/
base

where, A1-A2, B1-B2, C1-C2 are content-divergent with each other. Now we can
resolve A1-A2 very well because they have the same parent and let's say that
resolution leads to A3.
Now, we want to resolve B1-B2 and make the new resolution commit on top of A3 so
that we can end up something like:

C3
 |
B3
 |
A3
 |
base

however, amending one of the divergent changesets, it's not possible to create a
commit on a different parent like A3 here without some relocation. We should
prevent relocation as that may leads to some conflicts and should change the
parent before committing.

So, looking ahead, we can't move with using amend as still using that we will
need some relocation hacks making code ugly and prone to bad behaviors, bugs.
Let's change back to creating a new commit so that we can move forward in a good
way.

About repo.dirstate.setparents() not setting the dirstate, I have researched
yesterday night about how we can do that and found out that we can use
cmdrewrite._uncommitdirstate() here. Expect upcoming patches to improve the
documentation of that function.

There are lot of test changes because of change in hash but there is no behavior
change. The only behavior change is in test-evolve-abort-contentdiv.t which is
nice because creating a new commit helps us in stripping that while aborting.
We have a lot of testing of content-divergence and no behavior change gives
enough confidence for making this change.

I reviewed the patch carefully to make sure there is no behavior change and I
suggest reviewer to do the same.

Tests for the --stop flag for `hg evolve` command while resolving orphans
=========================================================================

The `--stop` flag stops the interrupted evolution and delete the state file so
user can do other things and comeback and do evolution later on

This is testing cases when `hg evolve` command is doing orphan resolution.

Setup
=====

  $ cat >> $HGRCPATH <<EOF
  > [alias]
  > glog = log -GT "{rev}:{node|short} {desc}\n ({bookmarks}) {phase}"
  > [extensions]
  > EOF
  $ echo "evolve=$(echo $(dirname $TESTDIR))/hgext3rd/evolve/" >> $HGRCPATH

  $ hg init stoprepo
  $ cd stoprepo
  $ echo ".*\.orig" > .hgignore
  $ hg add .hgignore
  $ hg ci -m "added hgignore"
  $ for ch in a b c d; do echo foo > $ch; hg add $ch; hg ci -qm "added "$ch; done;

  $ hg glog
  @  4:c41c793e0ef1 added d
  |   () draft
  o  3:ca1b80f7960a added c
  |   () draft
  o  2:b1661037fa25 added b
  |   () draft
  o  1:c7586e2a9264 added a
  |   () draft
  o  0:8fa14d15e168 added hgignore
      () draft

Testing `--stop` when no evolve is interrupted
==============================================

  $ hg evolve --stop
  abort: no interrupted evolve to stop
  [255]

Testing with wrong combinations of flags
========================================

  $ hg evolve --stop --rev 1
  abort: cannot specify both "--rev" and "--stop"
  [255]

  $ hg evolve --stop --continue
  abort: cannot specify both "--stop" and "--continue"
  [255]

  $ hg evolve --stop --all
  abort: cannot specify both "--all" and "--stop"
  [255]

  $ hg evolve --stop --any
  abort: cannot specify both "--any" and "--stop"
  [255]

Testing when only one revision is to evolve
===========================================

  $ hg prev
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  [3] added c
  $ echo bar > d
  $ hg add d
  $ hg amend
  1 new orphan changesets
  $ hg glog
  @  5:cb6a2ab625bb added c
  |   () draft
  | *  4:c41c793e0ef1 added d
  | |   () draft
  | x  3:ca1b80f7960a added c
  |/    () draft
  o  2:b1661037fa25 added b
  |   () draft
  o  1:c7586e2a9264 added a
  |   () draft
  o  0:8fa14d15e168 added hgignore
      () draft

  $ hg evolve
  move:[4] added d
  atop:[5] added c
  merging d
  warning: conflicts while merging d! (edit, then use 'hg resolve --mark')
  abort: fix conflicts and see `hg help evolve.interrupted`
  [255]

  $ hg evolve --stop
  stopped the interrupted evolve
  working directory is now at cb6a2ab625bb

Checking whether evolvestate file exists or not
  $ cat .hg/evolvestate
  cat: .hg/evolvestate: No such file or directory
  [1]

Checking where we are
  $ hg id
  cb6a2ab625bb tip

Checking working dir
  $ hg status
Checking for incomplete mergestate
  $ ls .hg/merge
  ls: cannot access .?\.hg/merge.?: No such file or directory (re)
  [2]

Checking graph
  $ hg glog
  @  5:cb6a2ab625bb added c
  |   () draft
  | *  4:c41c793e0ef1 added d
  | |   () draft
  | x  3:ca1b80f7960a added c
  |/    () draft
  o  2:b1661037fa25 added b
  |   () draft
  o  1:c7586e2a9264 added a
  |   () draft
  o  0:8fa14d15e168 added hgignore
      () draft

Testing the stop flag in case conflicts are caused by `hg next --evolve`
========================================================================

  $ hg next --evolve
  move:[4] added d
  atop:[5] added c
  merging d
  warning: conflicts while merging d! (edit, then use 'hg resolve --mark')
  abort: fix conflicts and see `hg help evolve.interrupted`
  [255]

  $ hg diff
  diff -r cb6a2ab625bb d
  --- a/d	Thu Jan 01 00:00:00 1970 +0000
  +++ b/d	Thu Jan 01 00:00:00 1970 +0000
  @@ -1,1 +1,5 @@
  +<<<<<<< destination: cb6a2ab625bb - test: added c
   bar
  +=======
  +foo
  +>>>>>>> evolving:    c41c793e0ef1 - test: added d

  $ hg evolve --stop
  stopped the interrupted evolve
  working directory is now at cb6a2ab625bb

  $ hg glog
  @  5:cb6a2ab625bb added c
  |   () draft
  | *  4:c41c793e0ef1 added d
  | |   () draft
  | x  3:ca1b80f7960a added c
  |/    () draft
  o  2:b1661037fa25 added b
  |   () draft
  o  1:c7586e2a9264 added a
  |   () draft
  o  0:8fa14d15e168 added hgignore
      () draft

  $ hg status

Checking when multiple revs need to be evolved, some revs evolve without
conflicts
=========================================================================

Making sure obsmarkers should be on evolved changeset and not rest of them once
we do `evolve --stop`
--------------------------------------------------------------------------------

  $ hg evolve
  move:[4] added d
  atop:[5] added c
  merging d
  warning: conflicts while merging d! (edit, then use 'hg resolve --mark')
  abort: fix conflicts and see `hg help evolve.interrupted`
  [255]
  $ echo foo > d
  $ hg resolve -m
  (no more unresolved files)
  continue: hg evolve --continue
  $ hg evolve --continue
  evolving 4:c41c793e0ef1 "added d"
  working directory is now at 2a4e03d422e2
  $ hg glog
  @  6:2a4e03d422e2 added d
  |   () draft
  o  5:cb6a2ab625bb added c
  |   () draft
  o  2:b1661037fa25 added b
  |   () draft
  o  1:c7586e2a9264 added a
  |   () draft
  o  0:8fa14d15e168 added hgignore
      () draft

  $ hg up .^^^^
  0 files updated, 0 files merged, 4 files removed, 0 files unresolved
  $ echo bar > c
  $ hg add c
  $ hg amend
  4 new orphan changesets

  $ hg glog
  @  7:21817cd42526 added hgignore
      () draft
  *  6:2a4e03d422e2 added d
  |   () draft
  *  5:cb6a2ab625bb added c
  |   () draft
  *  2:b1661037fa25 added b
  |   () draft
  *  1:c7586e2a9264 added a
  |   () draft
  x  0:8fa14d15e168 added hgignore
      () draft

  $ hg evolve --all
  move:[1] added a
  atop:[7] added hgignore
  move:[2] added b
  atop:[8] added a
  move:[5] added c
  atop:[9] added b
  merging c
  warning: conflicts while merging c! (edit, then use 'hg resolve --mark')
  abort: fix conflicts and see `hg help evolve.interrupted`
  [255]

  $ hg status
  M c
  A d

  $ hg evolve --stop
  stopped the interrupted evolve
  working directory is now at aec285328e90

Only changeset which has a successor now are obsoleted
  $ hg glog
  @  9:aec285328e90 added b
  |   () draft
  o  8:fd00db71edca added a
  |   () draft
  o  7:21817cd42526 added hgignore
      () draft
  *  6:2a4e03d422e2 added d
  |   () draft
  *  5:cb6a2ab625bb added c
  |   () draft
  x  2:b1661037fa25 added b
  |   () draft
  x  1:c7586e2a9264 added a
  |   () draft
  x  0:8fa14d15e168 added hgignore
      () draft

Making sure doing evolve again resumes from right place and does the right thing

  $ hg evolve --all
  move:[5] added c
  atop:[9] added b
  merging c
  warning: conflicts while merging c! (edit, then use 'hg resolve --mark')
  abort: fix conflicts and see `hg help evolve.interrupted`
  [255]

  $ echo foobar > c
  $ hg resolve -m
  (no more unresolved files)
  continue: hg evolve --continue
  $ hg evolve --continue
  evolving 5:cb6a2ab625bb "added c"
  move:[6] added d
  atop:[10] added c
  working directory is now at cd0909a30222
  $ hg glog
  @  11:cd0909a30222 added d
  |   () draft
  o  10:cb1dd1086ef6 added c
  |   () draft
  o  9:aec285328e90 added b
  |   () draft
  o  8:fd00db71edca added a
  |   () draft
  o  7:21817cd42526 added hgignore
      () draft

Bookmarks should only be moved of the changesets which have been evolved,
bookmarks of rest of them should stay where they are are
-------------------------------------------------------------------------

  $ hg up .^
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg bookmark b1
  $ hg up .^
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  (leaving bookmark b1)
  $ hg bookmark b2

  $ hg glog
  o  11:cd0909a30222 added d
  |   () draft
  o  10:cb1dd1086ef6 added c
  |   (b1) draft
  @  9:aec285328e90 added b
  |   (b2) draft
  o  8:fd00db71edca added a
  |   () draft
  o  7:21817cd42526 added hgignore
      () draft

  $ hg prev
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  [8] added a
  $ echo tom > c
  $ hg amend
  3 new orphan changesets

  $ hg glog
  @  12:a3cc2042492f added a
  |   () draft
  | *  11:cd0909a30222 added d
  | |   () draft
  | *  10:cb1dd1086ef6 added c
  | |   (b1) draft
  | *  9:aec285328e90 added b
  | |   (b2) draft
  | x  8:fd00db71edca added a
  |/    () draft
  o  7:21817cd42526 added hgignore
      () draft

  $ hg evolve --all
  move:[9] added b
  atop:[12] added a
  move:[10] added c
  atop:[13] added b
  merging c
  warning: conflicts while merging c! (edit, then use 'hg resolve --mark')
  abort: fix conflicts and see `hg help evolve.interrupted`
  [255]

  $ hg evolve --stop
  stopped the interrupted evolve
  working directory is now at a3f4b95da934

Bookmarks of only the changeset which are evolved is moved
  $ hg glog
  @  13:a3f4b95da934 added b
  |   (b2) draft
  o  12:a3cc2042492f added a
  |   () draft
  | *  11:cd0909a30222 added d
  | |   () draft
  | *  10:cb1dd1086ef6 added c
  | |   (b1) draft
  | x  9:aec285328e90 added b
  | |   () draft
  | x  8:fd00db71edca added a
  |/    () draft
  o  7:21817cd42526 added hgignore
      () draft