view tests/test-exchange-obsmarkers-case-D1.t @ 3225:28fb347a5bf8

typos: fix typos in several locations

A user at Google attempted to fix our local copy because they had noticed a
typo (accross instead of across), but this will just get overwritten on our
next import.  This commit fixes that case and a few others that my editor found.

Most of the typos were in comments, but user-visible output is changed in a few
cases:
- accross -> across
- splitted -> split
- ambigious -> ambiguous
- evolvestte -> evolvestate  (this is in a ui.debug, so not often seen)

There is another typo that I wanted to fix, but didn't: 'supercede' is spelled
'superseed' in a few locations.  I believe this is only internal to the
extension, instead of being user-visible, so while it could probably be fixed
easily, I wasn't 100% sure it didn't end up in a file on disk or something and
might cause problems, so I left it alone.

============================================
Testing obsolescence markers push: Cases D.1
============================================

Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).

This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.

Category D: Partial Information Case
TestCase 1: Pruned changeset based on missing precursor of something not present
Variants:
# a: explicite push
# b: bare push

D.1 Pruned changeset based on missing precursor of something not present
========================================================================

.. {{{
..   B ⊗
..     |
..   A ◌⇠◔ A'
..     |/
..     ● O
.. }}}
..
.. Markers exist from:
..
..  * `A ø⇠o A'`
..  * B (prune)
..
.. Command run:
..
..  * hg push -r A'
..  * hg push
..
.. Expected exchange:
..
..  * `A ø⇠o A'`
..  * B (prune)

Setup
-----

  $ . $TESTDIR/testlib/exchange-obsmarker-util.sh

initial

  $ setuprepos D.1
  creating test repo for test case D.1
  - pulldest
  - main
  - pushdest
  cd into `main` and proceed with env setup
  $ cd main
  $ mkcommit A0
  $ mkcommit B
  $ hg up -q 0
  $ mkcommit A1
  created new head
  $ hg debugobsolete `getid 'desc(A0)'` `getid 'desc(A1)'`
  obsoleted 1 changesets
  $ hg prune -d '0 0' 'desc(B)'
  1 changesets pruned
  $ hg strip --hidden -q 'desc(A0)' --config devel.strip-obsmarkers=no
  $ hg log -G --hidden
  @  e5ea8f9c7314 (draft): A1
  |
  o  a9bdc8b26820 (public): O
  
  $ inspect_obsmarkers
  obsstore content
  ================
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (*) {'user': 'test'} (glob)
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (*) {'ef1': '*', 'user': 'test'} (glob)
  obshashtree
  ===========
  a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04 0000000000000000000000000000000000000000
  e5ea8f9c73143125d36658e90ef70c6d2027a5b7 163059af30d498e215e86e1ead6ab749521c38be
  obshashrange
  ============
           rev         node        index         size        depth      obshash
             1 e5ea8f9c7314            0            2            2 163059af30d4
             0 a9bdc8b26820            0            1            1 000000000000
             1 e5ea8f9c7314            1            1            2 163059af30d4
  $ cd ..
  $ cd ..

  $ cp -R D.1 D.1.a
  $ cp -R D.1 D.1.b

Actual Test (explicit push)
---------------------------

  $ dotest D.1.a A1
  ## Running testcase D.1.a
  # testing echange of "A1" (e5ea8f9c7314)
  ## initial state
  # obstore: main
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (*) {'ef1': '*', 'user': 'test'} (glob)
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (*) {'user': 'test'} (glob)
  # obstore: pushdest
  # obstore: pulldest
  ## pushing "A1" from main to pushdest
  pushing to pushdest
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  remote: 2 new obsolescence markers
  ## post push state
  # obstore: main
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (*) {'ef1': '*', 'user': 'test'} (glob)
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (*) {'user': 'test'} (glob)
  # obstore: pushdest
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (*) {'ef1': '*', 'user': 'test'} (glob)
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (*) {'user': 'test'} (glob)
  # obstore: pulldest
  ## pulling "e5ea8f9c7314" from main into pulldest
  pulling from main
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  2 new obsolescence markers
  new changesets e5ea8f9c7314
  (run 'hg update' to get a working copy)
  ## post pull state
  # obstore: main
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (*) {'ef1': '*', 'user': 'test'} (glob)
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (*) {'user': 'test'} (glob)
  # obstore: pushdest
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (*) {'ef1': '*', 'user': 'test'} (glob)
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (*) {'user': 'test'} (glob)
  # obstore: pulldest
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (*) {'ef1': '*', 'user': 'test'} (glob)
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (*) {'user': 'test'} (glob)

Actual Test (base push)
---------------------------

  $ dotest D.1.b
  ## Running testcase D.1.b
  ## initial state
  # obstore: main
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (*) {'ef1': '*', 'user': 'test'} (glob)
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (*) {'user': 'test'} (glob)
  # obstore: pushdest
  # obstore: pulldest
  ## pushing from main to pushdest
  pushing to pushdest
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  remote: 2 new obsolescence markers
  ## post push state
  # obstore: main
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (*) {'ef1': '*', 'user': 'test'} (glob)
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (*) {'user': 'test'} (glob)
  # obstore: pushdest
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (*) {'ef1': '*', 'user': 'test'} (glob)
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (*) {'user': 'test'} (glob)
  # obstore: pulldest
  ## pulling from main into pulldest
  pulling from main
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  2 new obsolescence markers
  new changesets e5ea8f9c7314
  (run 'hg update' to get a working copy)
  ## post pull state
  # obstore: main
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (*) {'ef1': '*', 'user': 'test'} (glob)
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (*) {'user': 'test'} (glob)
  # obstore: pushdest
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (*) {'ef1': '*', 'user': 'test'} (glob)
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (*) {'user': 'test'} (glob)
  # obstore: pulldest
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (*) {'ef1': '*', 'user': 'test'} (glob)
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (*) {'user': 'test'} (glob)