view tests/test-exchange-obsmarkers-case-C2.t @ 4935:3874bc10d4a7 stable

docs: add two more amend commits to simulate temporary amend commits

sharing.rst made reference to temporary amend commits and used them to
demonstrate that hidden commits are not exchanged. Nowadays, evolve doesn't
create such commits, but it still makes sense to show how they are handled
during the exchange process. So let's add two more amend commits, one for each
repo. This way the guide doesn't have to be updated too much, but doesn't lose
this important detail of working with evolve.

Unfortunately, this means that tons of hashes change, but it's better than to
have figure 4 demonstrate absolutely nothing.

Temporary amend commits were removed from test-sharing.t in 06844693bb21,
but sharing.rst continued using them for demonstration purposes. It might've
been better to replace at least some of the temporary amend commits by extra
amends back then, but oh well.

============================================
Testing obsolescence markers push: Cases C.2
============================================

Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).

This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.

Category C: advanced case
TestCase 2: Pruned changeset on precursors
Variants:
# a: explicite push
# b: bare push

C.2 Pruned changeset on precursors
==================================

.. {{{
..   B ⊗
..     |
..   A ø⇠◔ A'
..     |/
..     ● O
.. }}}
..
.. Marker exist from:
..
..  * A' succeed to A
..  * B (prune)
..
.. Command run:
..
..  * hg push -r A'
..  * hg push
..
.. Expected exchange:
..
..  * `A ø⇠o A'`
..  * B (prune)

Setup
-----

  $ . $TESTDIR/testlib/exchange-obsmarker-util.sh

Itinial

  $ setuprepos C.2
  creating test repo for test case C.2
  - pulldest
  - main
  - pushdest
  cd into `main` and proceed with env setup
  $ cd main
  $ mkcommit A0
  $ mkcommit B
  $ hg prune -qd '0 0' .
  $ hg update -q 0
  $ mkcommit A1
  created new head
  $ hg debugobsolete `getid 'desc(A0)'` `getid 'desc(A1)'`
  1 new obsolescence markers
  obsoleted 1 changesets
  $ hg log -G --hidden
  @  e5ea8f9c7314 (draft): A1
  |
  | x  06055a7959d4 (draft): B
  | |
  | x  28b51eb45704 (draft): A0
  |/
  o  a9bdc8b26820 (public): O
  
  $ inspect_obsmarkers
  obsstore content
  ================
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'prune', 'user': 'test'}
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  obshashtree
  ===========
  a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04 0000000000000000000000000000000000000000
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f cfacc7f87b22bba57fd24c3472f08d00c33ada5d
  06055a7959d4128e6e3bccfd01482e83a2db8a3a b5ae2ee85cbc1b157410b51cd9fe78fb5bb753cf
  e5ea8f9c73143125d36658e90ef70c6d2027a5b7 945a85093e28fbda8065db6933af09acd8d22524
  obshashrange
  ============
           rev         node        index         size        depth      obshash
             3 e5ea8f9c7314            0            2            2 945a85093e28
             0 a9bdc8b26820            0            1            1 000000000000
             3 e5ea8f9c7314            1            1            2 945a85093e28
  $ cd ..
  $ cd ..

  $ cp -R C.2 C.2.a
  $ cp -R C.2 C.2.b

Actual Test (explicit push)
---------------------------

  $ dotest C.2.a A1
  ## Running testcase C.2.a
  # testing echange of "A1" (e5ea8f9c7314)
  ## initial state
  # obstore: main
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'prune', 'user': 'test'}
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing "A1" from main to pushdest
  pushing to pushdest
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  remote: 2 new obsolescence markers
  ## post push state
  # obstore: main
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'prune', 'user': 'test'}
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'prune', 'user': 'test'}
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  ## pulling "e5ea8f9c7314" from main into pulldest
  pulling from main
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  2 new obsolescence markers
  new changesets e5ea8f9c7314 (1 drafts)
  (run 'hg update' to get a working copy)
  ## post pull state
  # obstore: main
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'prune', 'user': 'test'}
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'prune', 'user': 'test'}
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'prune', 'user': 'test'}
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}

Actual Test (bare push)
-------------------------------------

  $ dotest C.2.b
  ## Running testcase C.2.b
  ## initial state
  # obstore: main
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'prune', 'user': 'test'}
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing from main to pushdest
  pushing to pushdest
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  remote: 2 new obsolescence markers
  ## post push state
  # obstore: main
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'prune', 'user': 'test'}
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'prune', 'user': 'test'}
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  ## pulling from main into pulldest
  pulling from main
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  2 new obsolescence markers
  new changesets e5ea8f9c7314 (1 drafts)
  (run 'hg update' to get a working copy)
  ## post pull state
  # obstore: main
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'prune', 'user': 'test'}
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'prune', 'user': 'test'}
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'prune', 'user': 'test'}
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}