view tests/test-exchange-obsmarkers-case-A3.t @ 5926:aca07ac01167

divergence-resolution: use last evolution date to choose p1 when merging

Before this patch, we choose the minimum revision as p1 while merging the
two divergent csets which had a drawback that if independent user resolve
the same divergence, their final resolved cset would have different hashes
(because of 'divergence_source_local' and 'divergence_source_other' extras).

Now, we decide the p1 on the basis of which of the two divergent cset
was rewritten more recently. This new logic removes the "different hash"
problem.

To save us from big output changes in the tests due to this change, I also
added the second factor i.e revision_number while sorting the csets wrt dates
(as date is same for all the csets in tests) to fallback to the old way of
picking the revision i.e choosing the minimum rev number.

And to demonstrate that now divergence resolution is independent of which
side user run the `hg evolve --content-div` resolved cset id won't change,
I have added a separate test file.
Flag --config devel.default-date='...' is being used here to record a
custom date in the obsmarkers.

============================================
Testing obsolescence markers push: Cases A.3
============================================

Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).

This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.

Category A: simple cases
TestCase 3: old branch split in two, only one of the new one pushed
Variants:
# a: changesets are known on remote
# b: changesets are known on remote (push needs -f)

A.3 new branchs created, one pushed.
====================================

.. {{{
..   B' ○⇢ø B
..      | |
..      \Aø⇠◔ A'
..       \|/
..        ● O
.. }}}
..
.. Markers  exist from:
..
..  * `A ø⇠○ A'`
..  * `B ø⇠○ B'`
..
.. Command runs:
..
..  * hg push -r A
..
.. Expected exchange:
..
..  * chain from A
..
.. Expected exclude:
..
..  * chain from B
..
.. Extra note:
..
.. If A and B are remontly known, we should expect:
..
..  * `hg push` will complain about the new head
..  * `hg push` should complain about unstable history creation

Setup
-----

  $ . $TESTDIR/testlib/exchange-obsmarker-util.sh

initial

  $ setuprepos A.3.a
  creating test repo for test case A.3.a
  - pulldest
  - main
  - pushdest
  cd into `main` and proceed with env setup
  $ cd main
  $ mkcommit A0
  $ mkcommit B0
  $ hg update -q 0
  $ mkcommit A1
  created new head
  $ hg update -q 0
  $ mkcommit B1
  created new head
  $ hg debugobsolete `getid 'desc(A0)'` `getid 'desc(A1)'`
  1 new obsolescence markers
  obsoleted 1 changesets
  1 new orphan changesets
  $ hg debugobsolete `getid 'desc(B0)'` `getid 'desc(B1)'`
  1 new obsolescence markers
  obsoleted 1 changesets
  $ hg log -G --hidden
  @  f6298a8ac3a4 (draft): B1
  |
  | o  e5ea8f9c7314 (draft): A1
  |/
  | x  6e72f0a95b5e (draft): B0
  | |
  | x  28b51eb45704 (draft): A0
  |/
  o  a9bdc8b26820 (public): O
  
  $ inspect_obsmarkers
  obsstore content
  ================
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  obshashtree
  ===========
  a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04 0000000000000000000000000000000000000000
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f 0000000000000000000000000000000000000000
  6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 0000000000000000000000000000000000000000
  e5ea8f9c73143125d36658e90ef70c6d2027a5b7 3bc2ee626e11a7cf8fee7a66d069271e17d5a597
  f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 91716bfd671b5a5854a47ac5d392edfdd25e431a
  obshashrange
  ============
           rev         node        index         size        depth      obshash
             3 e5ea8f9c7314            0            2            2 3bc2ee626e11
             4 f6298a8ac3a4            0            2            2 91716bfd671b
             0 a9bdc8b26820            0            1            1 000000000000
             3 e5ea8f9c7314            1            1            2 3bc2ee626e11
             4 f6298a8ac3a4            1            1            2 91716bfd671b
  $ cd ..
  $ cd ..

Actual Test for first version (changeset unknown in remote)
-----------------------------------------------------------

  $ dotest A.3.a A1
  ## Running testcase A.3.a
  # testing echange of "A1" (e5ea8f9c7314)
  ## initial state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing "A1" from main to pushdest
  pushing to pushdest
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  remote: 1 new obsolescence markers
  ## post push state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  ## pulling "e5ea8f9c7314" from main into pulldest
  pulling from main
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  1 new obsolescence markers
  new changesets e5ea8f9c7314 (1 drafts)
  (run 'hg update' to get a working copy)
  ## post pull state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}

other variant: changeset known in remote
----------------------------------------

  $ setuprepos A.3.b
  creating test repo for test case A.3.b
  - pulldest
  - main
  - pushdest
  cd into `main` and proceed with env setup
  $ cd main
  $ mkcommit A0
  $ mkcommit B0
  $ hg push -q ../pushdest
  $ hg push -q ../pulldest
  $ hg update -q 0
  $ mkcommit A1
  created new head
  $ hg update -q 0
  $ mkcommit B1
  created new head
  $ hg debugobsolete `getid 'desc(A0)'` `getid 'desc(A1)'`
  1 new obsolescence markers
  obsoleted 1 changesets
  1 new orphan changesets
  $ hg debugobsolete `getid 'desc(B0)'` `getid 'desc(B1)'`
  1 new obsolescence markers
  obsoleted 1 changesets
  $ hg log -G --hidden
  @  f6298a8ac3a4 (draft): B1
  |
  | o  e5ea8f9c7314 (draft): A1
  |/
  | x  6e72f0a95b5e (draft): B0
  | |
  | x  28b51eb45704 (draft): A0
  |/
  o  a9bdc8b26820 (public): O
  
  $ inspect_obsmarkers
  obsstore content
  ================
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  obshashtree
  ===========
  a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04 0000000000000000000000000000000000000000
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f 0000000000000000000000000000000000000000
  6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 0000000000000000000000000000000000000000
  e5ea8f9c73143125d36658e90ef70c6d2027a5b7 3bc2ee626e11a7cf8fee7a66d069271e17d5a597
  f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 91716bfd671b5a5854a47ac5d392edfdd25e431a
  obshashrange
  ============
           rev         node        index         size        depth      obshash
             3 e5ea8f9c7314            0            2            2 3bc2ee626e11
             4 f6298a8ac3a4            0            2            2 91716bfd671b
             0 a9bdc8b26820            0            1            1 000000000000
             3 e5ea8f9c7314            1            1            2 3bc2ee626e11
             4 f6298a8ac3a4            1            1            2 91716bfd671b
  $ cd ..
  $ cd ..

Actual Test for first version (changeset known in remote)
-----------------------------------------------------------

check it complains about multiple heads

  $ cd A.3.b
  $ hg push -R main -r 'desc(A1)' pushdest
  pushing to pushdest
  searching for changes
  abort: push creates new remote head e5ea8f9c7314
  (merge or see 'hg help push' for details about pushing new heads)
  [20]
  $ cd ..

test obsmarkers exchange.

  $ dotest A.3.b A1 -f
  ## Running testcase A.3.b
  # testing echange of "A1" (e5ea8f9c7314)
  ## initial state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing "A1" from main to pushdest
  pushing to pushdest
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files (+1 heads)
  remote: 1 new obsolescence markers
  remote: obsoleted 1 changesets
  remote: 1 new orphan changesets
  ## post push state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  ## pulling "e5ea8f9c7314" from main into pulldest
  pulling from main
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  1 new obsolescence markers
  obsoleted 1 changesets
  1 new orphan changesets
  new changesets e5ea8f9c7314 (1 drafts)
  (run 'hg heads' to see heads, 'hg merge' to merge)
  ## post pull state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}