view tests/test-exchange-obsmarkers-case-A1.t @ 6935:954d7ea5cd67 stable tip

stack: when stack base is obsolete, pick any successor, even if at random

There are situations when s0 is obsolete and we also cannot pick just one
successor for it to use in stack. In such a case, let's pick the "latest"
successor from the first set.

We're assuming that obsutil.successorssets() returns data in the same order (it
should, since it makes sure to sort data internally). Keeping that in mind,
while the successor picked for s0 by this code is not based on any sort of
sophisticated logic, it should nonetheless be the same every time.

This patch is probably not going to completely break anything that was
previously working fine, because the previous behavior was to just abort with
an exception.

============================================
Testing obsolescence markers push: Cases A.1
============================================

Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).

This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.

Category A: simple cases
TestCase 1: pushing a single head
Subcases:
# A.1.1 pushing a single head (2 variants)
# A.1.2 pushing multiple changesets into a single head (2 variants)

Case: A.1.1 pushing a single head
=================================
..
.. {{{
..     ⇠◔ A
..      |
..      ● O
.. }}}
..
.. Marker exists from:
..
..  * A
..
.. Commands run:
..
..  * hg push -r A
..  * hg push
..
.. Expected exchange:
..
..  * chain from A

Setup
-----

  $ . $TESTDIR/testlib/exchange-obsmarker-util.sh

initial

  $ setuprepos A.1.1
  creating test repo for test case A.1.1
  - pulldest
  - main
  - pushdest
  cd into `main` and proceed with env setup
  $ cd main
  $ mkcommit A
  $ hg debugobsolete aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa `getid 'desc(A)'`
  1 new obsolescence markers
  $ hg log -G
  @  f5bc6836db60 (draft): A
  |
  o  a9bdc8b26820 (public): O
  
  $ inspect_obsmarkers
  obsstore content
  ================
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  obshashtree
  ===========
  a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04 0000000000000000000000000000000000000000
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 50656e04a95ecdfed94659dd61f663b2caa55e98
  obshashrange
  ============
           rev         node        index         size        depth      obshash
             1 f5bc6836db60            0            2            2 50656e04a95e
             0 a9bdc8b26820            0            1            1 000000000000
             1 f5bc6836db60            1            1            2 50656e04a95e
  $ cd ..
  $ cd ..

setup both variants

  $ cp -R A.1.1 A.1.1.a
  $ cp -R A.1.1 A.1.1.b

Variant a: push -r A
--------------------

  $ dotest A.1.1.a A
  ## Running testcase A.1.1.a
  # testing echange of "A" (f5bc6836db60)
  ## initial state
  # obstore: main
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing "A" from main to pushdest
  pushing to pushdest
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  remote: 1 new obsolescence markers
  ## post push state
  # obstore: main
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  ## pulling "f5bc6836db60" from main into pulldest
  pulling from main
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  1 new obsolescence markers
  new changesets f5bc6836db60 (1 drafts)
  (run 'hg update' to get a working copy)
  ## post pull state
  # obstore: main
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}

Variant b: push
---------------

  $ dotest A.1.1.b
  ## Running testcase A.1.1.b
  ## initial state
  # obstore: main
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing from main to pushdest
  pushing to pushdest
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  remote: 1 new obsolescence markers
  ## post push state
  # obstore: main
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  ## pulling from main into pulldest
  pulling from main
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  1 new obsolescence markers
  new changesets f5bc6836db60 (1 drafts)
  (run 'hg update' to get a working copy)
  ## post pull state
  # obstore: main
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}

A.1.2 pushing multiple changesets into a single head
====================================================

.. {{{
..      ◔ B
..      |
..     ⇠◔ A
..      |
..      ● O
.. }}}
..
.. Marker exist from:
..
..  * A
..
.. Command run:
..
..  * hg push -r B
..  * hg push
..
.. Expected exchange:
..
..  * chain from A

Setup
-----

initial

  $ setuprepos A.1.2
  creating test repo for test case A.1.2
  - pulldest
  - main
  - pushdest
  cd into `main` and proceed with env setup
  $ cd main
  $ mkcommit A
  $ mkcommit B
  $ hg log -G
  @  f6fbb35d8ac9 (draft): B
  |
  o  f5bc6836db60 (draft): A
  |
  o  a9bdc8b26820 (public): O
  
  $ hg debugobsolete aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa `getid 'desc(A)'`
  1 new obsolescence markers
  $ inspect_obsmarkers
  obsstore content
  ================
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  obshashtree
  ===========
  a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04 0000000000000000000000000000000000000000
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 50656e04a95ecdfed94659dd61f663b2caa55e98
  f6fbb35d8ac958bbe70035e4c789c18471cdc0af 9cfa25b36856aa720419146abddd011cf87d368c
  obshashrange
  ============
           rev         node        index         size        depth      obshash
             2 f6fbb35d8ac9            0            3            3 000000000000
             1 f5bc6836db60            0            2            2 50656e04a95e
             0 a9bdc8b26820            0            1            1 000000000000
             1 f5bc6836db60            1            1            2 50656e04a95e
             2 f6fbb35d8ac9            2            1            3 000000000000
  $ cd ..
  $ cd ..

setup both variants

  $ cp -R A.1.2 A.1.2.a
  $ cp -R A.1.2 A.1.2.b

Variant a: push -r A
--------------------

  $ dotest A.1.2.a B
  ## Running testcase A.1.2.a
  # testing echange of "B" (f6fbb35d8ac9)
  ## initial state
  # obstore: main
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing "B" from main to pushdest
  pushing to pushdest
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 2 changesets with 2 changes to 2 files
  remote: 1 new obsolescence markers
  ## post push state
  # obstore: main
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  ## pulling "f6fbb35d8ac9" from main into pulldest
  pulling from main
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  1 new obsolescence markers
  new changesets f5bc6836db60:f6fbb35d8ac9 (2 drafts)
  (run 'hg update' to get a working copy)
  ## post pull state
  # obstore: main
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}

Variant b: push
---------------

  $ dotest A.1.2.b
  ## Running testcase A.1.2.b
  ## initial state
  # obstore: main
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing from main to pushdest
  pushing to pushdest
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 2 changesets with 2 changes to 2 files
  remote: 1 new obsolescence markers
  ## post push state
  # obstore: main
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  ## pulling from main into pulldest
  pulling from main
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  1 new obsolescence markers
  new changesets f5bc6836db60:f6fbb35d8ac9 (2 drafts)
  (run 'hg update' to get a working copy)
  ## post pull state
  # obstore: main
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}