tests/test-http-proxy.t

filemerge: make the 'local' path match the format that 'base' and 'other' use

If we pass a separate '$output' arg to the merge tool, we produce four files:
local, base, other, and output.  In this situation, 'output' will be the
original filename, 'base' and 'other' are temporary files, and previously
'local' would be the backup file (so if 'output' was foo.txt, 'local' would be
foo.txt.orig).

This change makes it so that 'local' follows the same pattern as 'base' and
'other' - it will be a temporary file either in the
`experimental.mergetempdirprefix`-controlled directory with a name like
foo~local.txt, or in the normal system-wide temp dir with a name like
foo~local.RaNd0m.txt.

For the cases where the merge tool does not use an '$output' arg, 'local' is
still the destination filename, and 'base' and 'other' are unchanged.

The hope is that this is much easier for people to reason about; rather than
having a tool like Meld pop up with three panes, one of them with the filename
"foo.txt.orig", one with the filename "foo.txt", and one with
"foo~other.StuFf2.txt", we can (when the merge temp dir stuff is enabled) make
it show up as "foo~local.txt", "foo.txt" and "foo~other.txt", respectively.

This also opens the door to future customization, such as getting the
operation-provided labels and a hash prefix into the filenames (so we see
something like "foo~dest.abc123", "foo.txt", and "foo~src.d4e5f6").

Differential Revision: https://phab.mercurial-scm.org/D2889

#require serve

  $ hg init a
  $ cd a
  $ echo a > a
  $ hg ci -Ama -d '1123456789 0'
  adding a
  $ hg serve --config server.uncompressed=True -p $HGPORT -d --pid-file=hg.pid
  $ cat hg.pid >> $DAEMON_PIDS
  $ cd ..
  $ tinyproxy.py $HGPORT1 localhost 2>proxy.log >/dev/null </dev/null &
  $ while [ ! -f proxy.pid ]; do sleep 0; done
  $ cat proxy.pid >> $DAEMON_PIDS

url for proxy, stream

  $ http_proxy=http://localhost:$HGPORT1/ hg --config http_proxy.always=True clone --stream http://localhost:$HGPORT/ b
  streaming all changes
  3 files to transfer, 303 bytes of data
  transferred * bytes in * seconds (*/sec) (glob)
  searching for changes
  no changes found
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd b
  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 1 changesets, 1 total revisions
  $ cd ..

url for proxy, pull

  $ http_proxy=http://localhost:$HGPORT1/ hg --config http_proxy.always=True clone http://localhost:$HGPORT/ b-pull
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 83180e7845de
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd b-pull
  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 1 changesets, 1 total revisions
  $ cd ..

host:port for proxy

  $ http_proxy=localhost:$HGPORT1 hg clone --config http_proxy.always=True http://localhost:$HGPORT/ c
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 83180e7845de
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

proxy url with user name and password

  $ http_proxy=http://user:passwd@localhost:$HGPORT1 hg clone --config http_proxy.always=True http://localhost:$HGPORT/ d
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 83180e7845de
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

url with user name and password

  $ http_proxy=http://user:passwd@localhost:$HGPORT1 hg clone --config http_proxy.always=True http://user:passwd@localhost:$HGPORT/ e
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 83180e7845de
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

bad host:port for proxy ("Protocol not supported" can happen on
misconfigured hosts)

  $ http_proxy=localhost:$HGPORT2 hg clone --config http_proxy.always=True http://localhost:$HGPORT/ f
  abort: error: (Connection refused|Protocol not supported|.* actively refused it|Cannot assign requested address) (re)
  [255]

do not use the proxy if it is in the no list

  $ http_proxy=localhost:$HGPORT1 hg clone --config http_proxy.no=localhost http://localhost:$HGPORT/ g
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 83180e7845de
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cat proxy.log
  * - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob)
  $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=branchmap HTTP/1.1" - - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ (glob)
  $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=stream_out HTTP/1.1" - - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ (glob)
  $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D83180e7845de420a1bb46896fd5fe05294f8d629 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ (glob)
  $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=0&common=83180e7845de420a1bb46896fd5fe05294f8d629&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ (glob)
  * - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob)
  $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ (glob)
  $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ (glob)
  * - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob)
  $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ (glob)
  $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ (glob)
  * - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob)
  $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ (glob)
  $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ (glob)
  * - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob)
  $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ (glob)
  $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ (glob)