tests/test-progress.t

revset.bisect: add 'ignored' set to the bisect keyword

The 'ignored' changesets are outside the bisection range, but are
changesets that may have an impact on the outcome of the bisection.

For example, in case there's a merge between the good and bad csets,
but the branch-point is out of the bisection range, and the issue
originates from this branch, the branch will not be visited by bisect
and bisect will find that the culprit cset is the merge.

So, the 'ignored' set is equivalent to:
    (   ( ::bisect(bad) - ::bisect(good) )
      | ( ::bisect(good) - ::bisect(bad) ) )
    - bisect(range)

 - all ancestors of bad csets that are not ancestors of good csets, or
 - all ancestors of good csets that are not ancestors of bad csets
 - but that are not in the bisection range.

Signed-off-by: "Yann E. MORIN" <[e-mail]>

  $ cat > loop.py <<EOF
  > from mercurial import commands
  > 
  > def loop(ui, loops, **opts):
  >     loops = int(loops)
  >     total = None
  >     if loops >= 0:
  >         total = loops
  >     if opts.get('total', None):
  >         total = int(opts.get('total'))
  >     nested = False
  >     if opts.get('nested', None):
  >         nested = True
  >     loops = abs(loops)
  > 
  >     for i in range(loops):
  >         ui.progress('loop', i, 'loop.%d' % i, 'loopnum', total)
  >         if opts.get('parallel'):
  >             ui.progress('other', i, 'other.%d' % i, 'othernum', total)
  >         if nested:
  >             for j in range(2):
  >                 ui.progress('nested', j, 'nested.%d' % j, 'nestnum', 2)
  >             ui.progress('nested', None, 'nested.done', 'nestnum', 2)
  >     ui.progress('loop', None, 'loop.done', 'loopnum', total)
  > 
  > commands.norepo += " loop"
  > 
  > cmdtable = {
  >     "loop": (loop, [('', 'total', '', 'override for total'),
  >                     ('', 'nested', False, 'show nested results'),
  >                     ('', 'parallel', False, 'show parallel sets of results'),
  >                    ],
  >              'hg loop LOOPS'),
  > }
  > EOF

  $ echo "[extensions]" >> $HGRCPATH
  $ echo "progress=" >> $HGRCPATH
  $ echo "loop=`pwd`/loop.py" >> $HGRCPATH
  $ echo "[progress]" >> $HGRCPATH
  $ echo  "format = topic bar number" >> $HGRCPATH
  $ echo "assume-tty=1" >> $HGRCPATH
  $ echo "width=60" >> $HGRCPATH

test default params, display nothing because of delay

  $ hg -y loop 3 2>&1 | $TESTDIR/filtercr.py
  
  $ echo "delay=0" >> $HGRCPATH
  $ echo "refresh=0" >> $HGRCPATH

test with delay=0, refresh=0

  $ hg -y loop 3 2>&1 | $TESTDIR/filtercr.py
  
  loop [                                                ] 0/3
  loop [===============>                                ] 1/3
  loop [===============================>                ] 2/3
                                                              \r (esc)


test nested short-lived topics (which shouldn't display with nestdelay):

  $ hg -y loop 3 --nested 2>&1 | \
  > python $TESTDIR/filtercr.py
  
  loop [                                                ] 0/3
  loop [===============>                                ] 1/3
  loop [===============================>                ] 2/3
                                                              \r (esc)


  $ hg --config progress.changedelay=0 -y loop 3 --nested 2>&1 | \
  > python $TESTDIR/filtercr.py
  
  loop [                                                ] 0/3
  nested [                                              ] 0/2
  nested [======================>                       ] 1/2
  loop [===============>                                ] 1/3
  nested [                                              ] 0/2
  nested [======================>                       ] 1/2
  loop [===============================>                ] 2/3
  nested [                                              ] 0/2
  nested [======================>                       ] 1/2
                                                              \r (esc)


test two topics being printed in parallel (as when we're doing a local
--pull clone, where you get the unbundle and bundle progress at the
same time):
  $ hg loop 3 --parallel 2>&1 | python $TESTDIR/filtercr.py
  
  loop [                                                ] 0/3
  loop [===============>                                ] 1/3
  loop [===============================>                ] 2/3
                                                              \r (esc)
test refresh is taken in account

  $ hg -y --config progress.refresh=100 loop 3 2>&1 | $TESTDIR/filtercr.py
  

test format options 1

  $ hg -y --config 'progress.format=number topic item+2' loop 2 2>&1 \
  > | $TESTDIR/filtercr.py
  
  0/2 loop lo
  1/2 loop lo
                                                              \r (esc)

test format options 2

  $ hg -y --config 'progress.format=number item-3 bar' loop 2 2>&1 \
  > | $TESTDIR/filtercr.py
  
  0/2 p.0 [                                                 ]
  1/2 p.1 [=======================>                         ]
                                                              \r (esc)

test format options and indeterminate progress

  $ hg -y --config 'progress.format=number item bar' loop -- -2 2>&1 \
  > | $TESTDIR/filtercr.py
  
  0 loop.0               [ <=>                              ]
  1 loop.1               [  <=>                             ]
                                                              \r (esc)

make sure things don't fall over if count > total

  $ hg -y loop --total 4 6 2>&1 | $TESTDIR/filtercr.py
  
  loop [                                                ] 0/4
  loop [===========>                                    ] 1/4
  loop [=======================>                        ] 2/4
  loop [===================================>            ] 3/4
  loop [===============================================>] 4/4
  loop [ <=>                                            ] 5/4
                                                              \r (esc)

test immediate progress completion

  $ hg -y loop 0 2>&1 | $TESTDIR/filtercr.py
  

test delay time estimates

  $ cat > mocktime.py <<EOF
  > import os
  > import time
  > 
  > class mocktime(object):
  >     def __init__(self, increment):
  >         self.time = 0
  >         self.increment = increment
  >     def __call__(self):
  >         self.time += self.increment
  >         return self.time
  > 
  > def uisetup(ui):
  >     time.time = mocktime(int(os.environ.get('MOCKTIME', '11')))
  > EOF

  $ echo "[extensions]" > $HGRCPATH
  $ echo "mocktime=`pwd`/mocktime.py" >> $HGRCPATH
  $ echo "progress=" >> $HGRCPATH
  $ echo "loop=`pwd`/loop.py" >> $HGRCPATH
  $ echo "[progress]" >> $HGRCPATH
  $ echo "assume-tty=1" >> $HGRCPATH
  $ echo "delay=25" >> $HGRCPATH
  $ echo "width=60" >> $HGRCPATH

  $ hg -y loop 8 2>&1 | python $TESTDIR/filtercr.py
  
  loop [=========>                                ] 2/8 1m07s
  loop [===============>                            ] 3/8 56s
  loop [=====================>                      ] 4/8 45s
  loop [==========================>                 ] 5/8 34s
  loop [================================>           ] 6/8 23s
  loop [=====================================>      ] 7/8 12s
                                                              \r (esc)

  $ MOCKTIME=10000 hg -y loop 4 2>&1 | python $TESTDIR/filtercr.py
  
  loop [                                                ] 0/4
  loop [=========>                                ] 1/4 8h21m
  loop [====================>                     ] 2/4 5h34m
  loop [==============================>           ] 3/4 2h47m
                                                              \r (esc)

  $ MOCKTIME=1000000 hg -y loop 4 2>&1 | python $TESTDIR/filtercr.py
  
  loop [                                                ] 0/4
  loop [=========>                                ] 1/4 5w00d
  loop [====================>                     ] 2/4 3w03d
  loop [=============================>           ] 3/4 11d14h
                                                              \r (esc)


  $ MOCKTIME=14000000 hg -y loop 4 2>&1 | python $TESTDIR/filtercr.py
  
  loop [                                                ] 0/4
  loop [=========>                                ] 1/4 1y18w
  loop [===================>                     ] 2/4 46w03d
  loop [=============================>           ] 3/4 23w02d
                                                              \r (esc)

Time estimates should not fail when there's no end point:
  $ hg -y loop -- -4 2>&1 | python $TESTDIR/filtercr.py
  
  loop [ <=>                                              ] 2
  loop [  <=>                                             ] 3
                                                              \r (esc)