annotate mercurial/repair.py @ 30451:41a8106789ca

util: implement zstd compression engine

Now that zstd is vendored and being built (in some configurations), we
can implement a compression engine for zstd!

The zstd engine is a little different from existing engines. Because
it may not always be present, we have to defer load the module in case
importing it fails. We facilitate this via a cached property that holds
a reference to the module or None. The "available" method is
implemented to reflect reality.

The zstd engine declares its ability to handle bundles using the
"zstd" human name and the "ZS" internal name. The latter was chosen
because internal names are 2 characters (by only convention I think)
and "ZS" seems reasonable.

The engine, like others, supports specifying the compression level.
However, there are no consumers of this API that yet pass in that
argument. I have plans to change that, so stay tuned.

Since all we need to do to support bundle generation with a new
compression engine is implement and register the compression engine,
bundle generation with zstd "just works!" Tests demonstrating this
have been added.

How does performance of zstd for bundle generation compare? On the
mozilla-unified repo, `hg bundle --all -t <engine>-v2` yields the
following on my i7-6700K on Linux:

engine        CPU time     bundle size   vs orig size   throughput
none            97.0s     4,054,405,584     100.0%       41.8 MB/s
bzip2 (l=9)    393.6s       975,343,098      24.0%       10.3 MB/s
gzip (l=6)     184.0s     1,140,533,074      28.1%       22.0 MB/s
zstd (l=1)     108.2s     1,119,434,718      27.6%       37.5 MB/s
zstd (l=2)     111.3s     1,078,328,002      26.6%       36.4 MB/s
zstd (l=3)     113.7s     1,011,823,727      25.0%       35.7 MB/s
zstd (l=4)     116.0s     1,008,965,888      24.9%       35.0 MB/s
zstd (l=5)     121.0s       977,203,148      24.1%       33.5 MB/s
zstd (l=6)     131.7s       927,360,198      22.9%       30.8 MB/s
zstd (l=7)     139.0s       912,808,505      22.5%       29.2 MB/s
zstd (l=12)    198.1s       854,527,714      21.1%       20.5 MB/s
zstd (l=18)    681.6s       789,750,690      19.5%        5.9 MB/s

On compression, zstd for bundle generation delivers:

* better compression than gzip with significantly less CPU utilization
* better than bzip2 compression ratios while still being significantly
  faster than gzip
* ability to aggressively tune compression level to achieve
  significantly smaller bundles

That last point is important. With clone bundles, a server can
pre-generate a bundle file, upload it to a static file server, and
redirect clients to transparently download it during clone. The server
could choose to produce a zstd bundle with the highest compression
settings possible. This would take a very long time - a magnitude
longer than a typical zstd bundle generation - but the result would
be hundreds of megabytes smaller! For the clone volume we do at
Mozilla, this could translate to petabytes of bandwidth savings
per year and faster clones (due to smaller transfer size).

I don't have detailed numbers to report on decompression. However,
zstd decompression is fast: >1 GB/s output throughput on this machine,
even through the Python bindings. And it can do that regardless of the
compression level of the input. By the time you have enough data to
worry about overhead of decompression, you have plenty of other things
to worry about performance wise.

zstd is wins all around. I can't wait to implement support for it
on the wire protocol and in revlogs.

# repair.py - functions for repository repair for mercurial
#
# Copyright 2005, 2006 Chris Mason <[e-mail]>
# Copyright 2007 Matt Mackall
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

from __future__ import absolute_import

import errno
import hashlib

from .i18n import _
from .node import short
from . import (
    bundle2,
    changegroup,
    error,
    exchange,
    obsolete,
    util,
)

def _bundle(repo, bases, heads, node, suffix, compress=True):
    """create a bundle with the specified revisions as a backup"""
    cgversion = changegroup.safeversion(repo)

    cg = changegroup.changegroupsubset(repo, bases, heads, 'strip',
                                       version=cgversion)
    backupdir = "strip-backup"
    vfs = repo.vfs
    if not vfs.isdir(backupdir):
        vfs.mkdir(backupdir)

    # Include a hash of all the nodes in the filename for uniqueness
    allcommits = repo.set('%ln::%ln', bases, heads)
    allhashes = sorted(c.hex() for c in allcommits)
    totalhash = hashlib.sha1(''.join(allhashes)).hexdigest()
    name = "%s/%s-%s-%s.hg" % (backupdir, short(node), totalhash[:8], suffix)

    comp = None
    if cgversion != '01':
        bundletype = "HG20"
        if compress:
            comp = 'BZ'
    elif compress:
        bundletype = "HG10BZ"
    else:
        bundletype = "HG10UN"
    return bundle2.writebundle(repo.ui, cg, name, bundletype, vfs,
                                   compression=comp)

def _collectfiles(repo, striprev):
    """find out the filelogs affected by the strip"""
    files = set()

    for x in xrange(striprev, len(repo)):
        files.update(repo[x].files())

    return sorted(files)

def _collectbrokencsets(repo, files, striprev):
    """return the changesets which will be broken by the truncation"""
    s = set()
    def collectone(revlog):
        _, brokenset = revlog.getstrippoint(striprev)
        s.update([revlog.linkrev(r) for r in brokenset])

    collectone(repo.manifestlog._revlog)
    for fname in files:
        collectone(repo.file(fname))

    return s

def strip(ui, repo, nodelist, backup=True, topic='backup'):
    # This function operates within a transaction of its own, but does
    # not take any lock on the repo.
    # Simple way to maintain backwards compatibility for this
    # argument.
    if backup in ['none', 'strip']:
        backup = False

    repo = repo.unfiltered()
    repo.destroying()

    cl = repo.changelog
    # TODO handle undo of merge sets
    if isinstance(nodelist, str):
        nodelist = [nodelist]
    striplist = [cl.rev(node) for node in nodelist]
    striprev = min(striplist)

    # Some revisions with rev > striprev may not be descendants of striprev.
    # We have to find these revisions and put them in a bundle, so that
    # we can restore them after the truncations.
    # To create the bundle we use repo.changegroupsubset which requires
    # the list of heads and bases of the set of interesting revisions.
    # (head = revision in the set that has no descendant in the set;
    #  base = revision in the set that has no ancestor in the set)
    tostrip = set(striplist)
    for rev in striplist:
        for desc in cl.descendants([rev]):
            tostrip.add(desc)

    files = _collectfiles(repo, striprev)
    saverevs = _collectbrokencsets(repo, files, striprev)

    # compute heads
    saveheads = set(saverevs)
    for r in xrange(striprev + 1, len(cl)):
        if r not in tostrip:
            saverevs.add(r)
            saveheads.difference_update(cl.parentrevs(r))
            saveheads.add(r)
    saveheads = [cl.node(r) for r in saveheads]

    # compute base nodes
    if saverevs:
        descendants = set(cl.descendants(saverevs))
        saverevs.difference_update(descendants)
    savebases = [cl.node(r) for r in saverevs]
    stripbases = [cl.node(r) for r in tostrip]

    # For a set s, max(parents(s) - s) is the same as max(heads(::s - s)), but
    # is much faster
    newbmtarget = repo.revs('max(parents(%ld) - (%ld))', tostrip, tostrip)
    if newbmtarget:
        newbmtarget = repo[newbmtarget.first()].node()
    else:
        newbmtarget = '.'

    bm = repo._bookmarks
    updatebm = []
    for m in bm:
        rev = repo[bm[m]].rev()
        if rev in tostrip:
            updatebm.append(m)

    # create a changegroup for all the branches we need to keep
    backupfile = None
    vfs = repo.vfs
    node = nodelist[-1]
    if backup:
        backupfile = _bundle(repo, stripbases, cl.heads(), node, topic)
        repo.ui.status(_("saved backup bundle to %s\n") %
                       vfs.join(backupfile))
        repo.ui.log("backupbundle", "saved backup bundle to %s\n",
                    vfs.join(backupfile))
    tmpbundlefile = None
    if saveheads:
        # do not compress temporary bundle if we remove it from disk later
        tmpbundlefile = _bundle(repo, savebases, saveheads, node, 'temp',
                            compress=False)

    mfst = repo.manifestlog._revlog

    curtr = repo.currenttransaction()
    if curtr is not None:
        del curtr  # avoid carrying reference to transaction for nothing
        msg = _('programming error: cannot strip from inside a transaction')
        raise error.Abort(msg, hint=_('contact your extension maintainer'))

    try:
        with repo.transaction("strip") as tr:
            offset = len(tr.entries)

            tr.startgroup()
            cl.strip(striprev, tr)
            mfst.strip(striprev, tr)
            if 'treemanifest' in repo.requirements: # safe but unnecessary
                                                    # otherwise
                for unencoded, encoded, size in repo.store.datafiles():
                    if (unencoded.startswith('meta/') and
                        unencoded.endswith('00manifest.i')):
                        dir = unencoded[5:-12]
                        repo.manifestlog._revlog.dirlog(dir).strip(striprev, tr)
            for fn in files:
                repo.file(fn).strip(striprev, tr)
            tr.endgroup()

            for i in xrange(offset, len(tr.entries)):
                file, troffset, ignore = tr.entries[i]
                with repo.svfs(file, 'a', checkambig=True) as fp:
                    fp.truncate(troffset)
                if troffset == 0:
                    repo.store.markremoved(file)

        if tmpbundlefile:
            ui.note(_("adding branch\n"))
            f = vfs.open(tmpbundlefile, "rb")
            gen = exchange.readbundle(ui, f, tmpbundlefile, vfs)
            if not repo.ui.verbose:
                # silence internal shuffling chatter
                repo.ui.pushbuffer()
            if isinstance(gen, bundle2.unbundle20):
                with repo.transaction('strip') as tr:
                    tr.hookargs = {'source': 'strip',
                                   'url': 'bundle:' + vfs.join(tmpbundlefile)}
                    bundle2.applybundle(repo, gen, tr, source='strip',
                                        url='bundle:' + vfs.join(tmpbundlefile))
            else:
                gen.apply(repo, 'strip', 'bundle:' + vfs.join(tmpbundlefile),
                          True)
            if not repo.ui.verbose:
                repo.ui.popbuffer()
            f.close()
        repo._phasecache.invalidate()

        for m in updatebm:
            bm[m] = repo[newbmtarget].node()
        lock = tr = None
        try:
            lock = repo.lock()
            tr = repo.transaction('repair')
            bm.recordchange(tr)
            tr.close()
        finally:
            tr.release()
            lock.release()

        # remove undo files
        for undovfs, undofile in repo.undofiles():
            try:
                undovfs.unlink(undofile)
            except OSError as e:
                if e.errno != errno.ENOENT:
                    ui.warn(_('error removing %s: %s\n') %
                            (undovfs.join(undofile), str(e)))

    except: # re-raises
        if backupfile:
            ui.warn(_("strip failed, backup bundle stored in '%s'\n")
                    % vfs.join(backupfile))
        if tmpbundlefile:
            ui.warn(_("strip failed, unrecovered changes stored in '%s'\n")
                    % vfs.join(tmpbundlefile))
            ui.warn(_("(fix the problem, then recover the changesets with "
                      "\"hg unbundle '%s'\")\n") % vfs.join(tmpbundlefile))
        raise
    else:
        if tmpbundlefile:
            # Remove temporary bundle only if there were no exceptions
            vfs.unlink(tmpbundlefile)

    repo.destroyed()
    # return the backup file path (or None if 'backup' was False) so
    # extensions can use it
    return backupfile

def rebuildfncache(ui, repo):
    """Rebuilds the fncache file from repo history.

    Missing entries will be added. Extra entries will be removed.
    """
    repo = repo.unfiltered()

    if 'fncache' not in repo.requirements:
        ui.warn(_('(not rebuilding fncache because repository does not '
                  'support fncache)\n'))
        return

    with repo.lock():
        fnc = repo.store.fncache
        # Trigger load of fncache.
        if 'irrelevant' in fnc:
            pass

        oldentries = set(fnc.entries)
        newentries = set()
        seenfiles = set()

        repolen = len(repo)
        for rev in repo:
            ui.progress(_('rebuilding'), rev, total=repolen,
                        unit=_('changesets'))

            ctx = repo[rev]
            for f in ctx.files():
                # This is to minimize I/O.
                if f in seenfiles:
                    continue
                seenfiles.add(f)

                i = 'data/%s.i' % f
                d = 'data/%s.d' % f

                if repo.store._exists(i):
                    newentries.add(i)
                if repo.store._exists(d):
                    newentries.add(d)

        ui.progress(_('rebuilding'), None)

        if 'treemanifest' in repo.requirements: # safe but unnecessary otherwise
            for dir in util.dirs(seenfiles):
                i = 'meta/%s/00manifest.i' % dir
                d = 'meta/%s/00manifest.d' % dir

                if repo.store._exists(i):
                    newentries.add(i)
                if repo.store._exists(d):
                    newentries.add(d)

        addcount = len(newentries - oldentries)
        removecount = len(oldentries - newentries)
        for p in sorted(oldentries - newentries):
            ui.write(_('removing %s\n') % p)
        for p in sorted(newentries - oldentries):
            ui.write(_('adding %s\n') % p)

        if addcount or removecount:
            ui.write(_('%d items added, %d removed from fncache\n') %
                     (addcount, removecount))
            fnc.entries = newentries
            fnc._dirty = True

            with repo.transaction('fncache') as tr:
                fnc.write(tr)
        else:
            ui.write(_('fncache already up to date\n'))

def stripbmrevset(repo, mark):
    """
    The revset to strip when strip is called with -B mark

    Needs to live here so extensions can use it and wrap it even when strip is
    not enabled or not present on a box.
    """
    return repo.revs("ancestors(bookmark(%s)) - "
                     "ancestors(head() and not bookmark(%s)) - "
                     "ancestors(bookmark() and not bookmark(%s))",
                     mark, mark, mark)

def deleteobsmarkers(obsstore, indices):
    """Delete some obsmarkers from obsstore and return how many were deleted

    'indices' is a list of ints which are the indices
    of the markers to be deleted.

    Every invocation of this function completely rewrites the obsstore file,
    skipping the markers we want to be removed. The new temporary file is
    created, remaining markers are written there and on .close() this file
    gets atomically renamed to obsstore, thus guaranteeing consistency."""
    if not indices:
        # we don't want to rewrite the obsstore with the same content
        return

    left = []
    current = obsstore._all
    n = 0
    for i, m in enumerate(current):
        if i in indices:
            n += 1
            continue
        left.append(m)

    newobsstorefile = obsstore.svfs('obsstore', 'w', atomictemp=True)
    for bytes in obsolete.encodemarkers(left, True, obsstore._version):
        newobsstorefile.write(bytes)
    newobsstorefile.close()
    return n