annotate tests/test-revert-interactive.t @ 32200:4d504e541d3d

rebase: use matcher to optimize manifestmerge

The old merge code would call manifestmerge and calculate the complete diff
between the source to the destination. In many cases, like rebase, the vast
majority of differences between the source and destination are irrelevant
because they are differences between the destination and the common ancestor
only, and therefore don't affect the merge. Since most actions are 'keep', all
the effort to compute them is wasted.

Instead, let's compute the difference between the source and the common ancestor
and only perform the diff of those files against the merge destination. When
using treemanifest, this lets us avoid loading almost the entire tree when
rebasing from a very old ancestor. This speeds up rebase of an old stack of 27
commits by 20x.

In mozilla-central, without treemanifest, when rebasing a commit from
default~100000 to default, this speeds up the manifestmerge step from 2.6s to
1.2s.  However, the additional diff adds an overhead to all manifestmerge calls,
especially for flat manifests. When rebasing a commit from default~1 to default
it appears to add 100ms in mozilla-central. While we could put this optimization
behind a flag, I think the fact that it makes merge O(number of changes being
applied) instead of O(number of changes between X and Y) justifies it.

Revert interactive tests
1 add and commit file f
2 add commit file folder1/g
3 add and commit file folder2/h
4 add and commit file folder1/i
5 commit change to file f
6 commit changes to files folder1/g folder2/h
7 commit changes to files folder1/g folder2/h
8 revert interactive to commit id 2 (line 3 above), check that folder1/i is removed and
9 make workdir match 7
10 run the same test than 8 from within folder1 and check same expectations

  $ cat <<EOF >> $HGRCPATH
  > [ui]
  > interactive = true
  > [extensions]
  > record =
  > purge = 
  > EOF


  $ mkdir -p a/folder1 a/folder2
  $ cd a
  $ hg init
  >>> open('f', 'wb').write("1\n2\n3\n4\n5\n")
  $ hg add f ; hg commit -m "adding f"
  $ cat f > folder1/g ; hg add folder1/g ; hg commit -m "adding folder1/g"
  $ cat f > folder2/h ; hg add folder2/h ; hg commit -m "adding folder2/h"
  $ cat f > folder1/i ; hg add folder1/i ; hg commit -m "adding folder1/i"
  >>> open('f', 'wb').write("a\n1\n2\n3\n4\n5\nb\n")
  $ hg commit -m "modifying f"
  >>> open('folder1/g', 'wb').write("c\n1\n2\n3\n4\n5\nd\n")
  $ hg commit -m "modifying folder1/g"
  >>> open('folder2/h', 'wb').write("e\n1\n2\n3\n4\n5\nf\n")
  $ hg commit -m "modifying folder2/h"
  $ hg tip
  changeset:   6:59dd6e4ab63a
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     modifying folder2/h
  
  $ hg revert -i -r 2 --all -- << EOF
  > y
  > y
  > y
  > y
  > y
  > ?
  > y
  > n
  > n
  > EOF
  reverting f
  reverting folder1/g (glob)
  removing folder1/i (glob)
  reverting folder2/h (glob)
  remove added file folder1/i (Yn)? y
  diff --git a/f b/f
  2 hunks, 2 lines changed
  examine changes to 'f'? [Ynesfdaq?] y
  
  @@ -1,5 +1,6 @@
  +a
   1
   2
   3
   4
   5
  revert change 1/6 to 'f'? [Ynesfdaq?] y
  
  @@ -1,5 +2,6 @@
   1
   2
   3
   4
   5
  +b
  revert change 2/6 to 'f'? [Ynesfdaq?] y
  
  diff --git a/folder1/g b/folder1/g
  2 hunks, 2 lines changed
  examine changes to 'folder1/g'? [Ynesfdaq?] y
  
  @@ -1,5 +1,6 @@
  +c
   1
   2
   3
   4
   5
  revert change 3/6 to 'folder1/g'? [Ynesfdaq?] ?
  
  y - yes, revert this change
  n - no, skip this change
  e - edit this change manually
  s - skip remaining changes to this file
  f - revert remaining changes to this file
  d - done, skip remaining changes and files
  a - revert all changes to all remaining files
  q - quit, reverting no changes
  ? - ? (display help)
  revert change 3/6 to 'folder1/g'? [Ynesfdaq?] y
  
  @@ -1,5 +2,6 @@
   1
   2
   3
   4
   5
  +d
  revert change 4/6 to 'folder1/g'? [Ynesfdaq?] n
  
  diff --git a/folder2/h b/folder2/h
  2 hunks, 2 lines changed
  examine changes to 'folder2/h'? [Ynesfdaq?] n
  
  $ cat f
  1
  2
  3
  4
  5
  $ cat folder1/g
  1
  2
  3
  4
  5
  d
  $ cat folder2/h
  e
  1
  2
  3
  4
  5
  f

Test that --interactive lift the need for --all

  $ echo q | hg revert -i -r 2
  reverting folder1/g (glob)
  reverting folder2/h (glob)
  diff --git a/folder1/g b/folder1/g
  1 hunks, 1 lines changed
  examine changes to 'folder1/g'? [Ynesfdaq?] q
  
  abort: user quit
  [255]
  $ ls folder1/
  g

Test that a noop revert doesn't do an unnecessary backup
  $ (echo y; echo n) | hg revert -i -r 2 folder1/g
  diff --git a/folder1/g b/folder1/g
  1 hunks, 1 lines changed
  examine changes to 'folder1/g'? [Ynesfdaq?] y
  
  @@ -3,3 +3,4 @@
   3
   4
   5
  +d
  revert this change to 'folder1/g'? [Ynesfdaq?] n
  
  $ ls folder1/
  g

Test --no-backup
  $ (echo y; echo y) | hg revert -i -C -r 2 folder1/g
  diff --git a/folder1/g b/folder1/g
  1 hunks, 1 lines changed
  examine changes to 'folder1/g'? [Ynesfdaq?] y
  
  @@ -3,3 +3,4 @@
   3
   4
   5
  +d
  revert this change to 'folder1/g'? [Ynesfdaq?] y
  
  $ ls folder1/
  g
  >>> open('folder1/g', 'wb').write("1\n2\n3\n4\n5\nd\n")


  $ hg update -C 6
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg revert -i -r 2 --all -- << EOF
  > n
  > y
  > y
  > y
  > y
  > y
  > n
  > n
  > EOF
  reverting f
  reverting folder1/g (glob)
  removing folder1/i (glob)
  reverting folder2/h (glob)
  remove added file folder1/i (Yn)? n
  diff --git a/f b/f
  2 hunks, 2 lines changed
  examine changes to 'f'? [Ynesfdaq?] y
  
  @@ -1,5 +1,6 @@
  +a
   1
   2
   3
   4
   5
  revert change 1/6 to 'f'? [Ynesfdaq?] y
  
  @@ -1,5 +2,6 @@
   1
   2
   3
   4
   5
  +b
  revert change 2/6 to 'f'? [Ynesfdaq?] y
  
  diff --git a/folder1/g b/folder1/g
  2 hunks, 2 lines changed
  examine changes to 'folder1/g'? [Ynesfdaq?] y
  
  @@ -1,5 +1,6 @@
  +c
   1
   2
   3
   4
   5
  revert change 3/6 to 'folder1/g'? [Ynesfdaq?] y
  
  @@ -1,5 +2,6 @@
   1
   2
   3
   4
   5
  +d
  revert change 4/6 to 'folder1/g'? [Ynesfdaq?] n
  
  diff --git a/folder2/h b/folder2/h
  2 hunks, 2 lines changed
  examine changes to 'folder2/h'? [Ynesfdaq?] n
  
  $ cat f
  1
  2
  3
  4
  5
  $ cat folder1/g
  1
  2
  3
  4
  5
  d
  $ cat folder2/h
  e
  1
  2
  3
  4
  5
  f
  $ hg st
  M f
  M folder1/g
  $ hg revert --interactive f << EOF
  > y
  > ?
  > y
  > n
  > n
  > EOF
  diff --git a/f b/f
  2 hunks, 2 lines changed
  examine changes to 'f'? [Ynesfdaq?] y
  
  @@ -1,6 +1,5 @@
  -a
   1
   2
   3
   4
   5
  discard change 1/2 to 'f'? [Ynesfdaq?] ?
  
  y - yes, discard this change
  n - no, skip this change
  e - edit this change manually
  s - skip remaining changes to this file
  f - discard remaining changes to this file
  d - done, skip remaining changes and files
  a - discard all changes to all remaining files
  q - quit, discarding no changes
  ? - ? (display help)
  discard change 1/2 to 'f'? [Ynesfdaq?] y
  
  @@ -2,6 +1,5 @@
   1
   2
   3
   4
   5
  -b
  discard change 2/2 to 'f'? [Ynesfdaq?] n
  
  $ hg st
  M f
  M folder1/g
  ? f.orig
  $ cat f
  a
  1
  2
  3
  4
  5
  $ cat f.orig
  1
  2
  3
  4
  5
  $ rm f.orig
  $ hg update -C .
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

Check editing files newly added by a revert

1) Create a dummy editor changing 1 to 42
  $ cat > $TESTTMP/editor.sh << '__EOF__'
  > cat "$1"  | sed "s/1/42/g"  > tt
  > mv tt  "$1"
  > __EOF__

2) Add k
  $ printf "1\n" > k
  $ hg add k
  $ hg commit -m "add k"

3) Use interactive revert with editing (replacing +1 with +42):
  $ printf "0\n2\n" > k
  $ HGEDITOR="\"sh\" \"${TESTTMP}/editor.sh\"" hg revert -i  <<EOF
  > y
  > e
  > EOF
  reverting k
  diff --git a/k b/k
  1 hunks, 2 lines changed
  examine changes to 'k'? [Ynesfdaq?] y
  
  @@ -1,1 +1,2 @@
  -1
  +0
  +2
  discard this change to 'k'? [Ynesfdaq?] e
  
  $ cat k
  42

Check the experimental config to invert the selection:
  $ cat <<EOF >> $HGRCPATH
  > [experimental]
  > revertalternateinteractivemode=False
  > EOF


  $ hg up -C .
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ printf 'firstline\nc\n1\n2\n3\n 3\n5\nd\nlastline\n' > folder1/g
  $ hg diff --nodates
  diff -r a3d963a027aa folder1/g
  --- a/folder1/g
  +++ b/folder1/g
  @@ -1,7 +1,9 @@
  +firstline
   c
   1
   2
   3
  -4
  + 3
   5
   d
  +lastline
  $ hg revert -i <<EOF
  > y
  > y
  > y
  > n
  > EOF
  reverting folder1/g (glob)
  diff --git a/folder1/g b/folder1/g
  3 hunks, 3 lines changed
  examine changes to 'folder1/g'? [Ynesfdaq?] y
  
  @@ -1,4 +1,5 @@
  +firstline
   c
   1
   2
   3
  discard change 1/3 to 'folder1/g'? [Ynesfdaq?] y
  
  @@ -1,7 +2,7 @@
   c
   1
   2
   3
  -4
  + 3
   5
   d
  discard change 2/3 to 'folder1/g'? [Ynesfdaq?] y
  
  @@ -6,2 +7,3 @@
   5
   d
  +lastline
  discard change 3/3 to 'folder1/g'? [Ynesfdaq?] n
  
  $ hg diff --nodates
  diff -r a3d963a027aa folder1/g
  --- a/folder1/g
  +++ b/folder1/g
  @@ -5,3 +5,4 @@
   4
   5
   d
  +lastline

  $ hg update -C .
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg purge
  $ touch newfile
  $ hg add newfile
  $ hg status
  A newfile
  $ hg revert -i <<EOF
  > n
  > EOF
  forgetting newfile
  forget added file newfile (Yn)? n
  $ hg status
  A newfile
  $ hg revert -i <<EOF
  > y
  > EOF
  forgetting newfile
  forget added file newfile (Yn)? y
  $ hg status
  ? newfile