tests/test-treemanifest.t

rust: run a clippy pass with the latest stable version

Our current version of clippy is older than the latest stable.
The newest version has new lints that are moslty good advice, so let's apply
them ahead of time. This has the added benefit of reducing the noise for
developpers like myself that use clippy as an IDE helper, as well as being
more prepared for a future clippy upgrade.

Set up repo

  $ hg --config experimental.treemanifest=True init repo
  $ cd repo

Requirements get set on init

  $ hg debugrequires | grep treemanifest
  treemanifest

Without directories, looks like any other repo

  $ echo 0 > a
  $ echo 0 > b
  $ hg ci -Aqm initial
  $ hg debugdata -m 0
  a\x00362fef284ce2ca02aecc8de6d5e8a1c3af0556fe (esc)
  b\x00362fef284ce2ca02aecc8de6d5e8a1c3af0556fe (esc)

Submanifest is stored in separate revlog

  $ mkdir dir1
  $ echo 1 > dir1/a
  $ echo 1 > dir1/b
  $ echo 1 > e
  $ hg ci -Aqm 'add dir1'
  $ hg debugdata -m 1
  a\x00362fef284ce2ca02aecc8de6d5e8a1c3af0556fe (esc)
  b\x00362fef284ce2ca02aecc8de6d5e8a1c3af0556fe (esc)
  dir1\x008b3ffd73f901e83304c83d33132c8e774ceac44et (esc)
  e\x00b8e02f6433738021a065f94175c7cd23db5f05be (esc)
  $ hg debugdata --dir dir1 0
  a\x00b8e02f6433738021a065f94175c7cd23db5f05be (esc)
  b\x00b8e02f6433738021a065f94175c7cd23db5f05be (esc)

Can add nested directories

  $ mkdir dir1/dir1
  $ echo 2 > dir1/dir1/a
  $ echo 2 > dir1/dir1/b
  $ mkdir dir1/dir2
  $ echo 2 > dir1/dir2/a
  $ echo 2 > dir1/dir2/b
  $ hg ci -Aqm 'add dir1/dir1'
  $ hg files -r .
  a
  b
  dir1/a
  dir1/b
  dir1/dir1/a
  dir1/dir1/b
  dir1/dir2/a
  dir1/dir2/b
  e

The manifest command works

  $ hg manifest
  a
  b
  dir1/a
  dir1/b
  dir1/dir1/a
  dir1/dir1/b
  dir1/dir2/a
  dir1/dir2/b
  e

Revision is not created for unchanged directory

  $ mkdir dir2
  $ echo 3 > dir2/a
  $ hg add dir2
  adding dir2/a
  $ hg debugindex --dir dir1 > before
  $ hg ci -qm 'add dir2'
  $ hg debugindex --dir dir1 > after
  $ diff before after
  $ rm before after

Removing directory does not create an revlog entry

  $ hg rm dir1/dir1
  removing dir1/dir1/a
  removing dir1/dir1/b
  $ hg debugindex --dir dir1/dir1 > before
  $ hg ci -qm 'remove dir1/dir1'
  $ hg debugindex --dir dir1/dir1 > after
  $ diff before after
  $ rm before after

Check that hg files (calls treemanifest.walk()) works
without loading all directory revlogs

  $ hg co 'desc("add dir2")'
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ mv .hg/store/meta/dir2 .hg/store/meta/dir2-backup
  $ hg files -r . dir1
  dir1/a
  dir1/b
  dir1/dir1/a
  dir1/dir1/b
  dir1/dir2/a
  dir1/dir2/b

Check that status between revisions works (calls treemanifest.matches())
without loading all directory revlogs

  $ hg status --rev 'desc("add dir1")' --rev . dir1
  A dir1/dir1/a
  A dir1/dir1/b
  A dir1/dir2/a
  A dir1/dir2/b
  $ mv .hg/store/meta/dir2-backup .hg/store/meta/dir2

Merge creates 2-parent revision of directory revlog

  $ echo 5 > dir1/a
  $ hg ci -Aqm 'modify dir1/a'
  $ hg co '.^'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo 6 > dir1/b
  $ hg ci -Aqm 'modify dir1/b'
  $ hg merge 'desc("modify dir1/a")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg ci -m 'conflict-free merge involving dir1/'
  $ cat dir1/a
  5
  $ cat dir1/b
  6
  $ hg debugindex --dir dir1
     rev linkrev       nodeid    p1-nodeid    p2-nodeid
       0       1 8b3ffd73f901 000000000000 000000000000
       1       2 68e9d057c5a8 8b3ffd73f901 000000000000
       2       4 4698198d2624 68e9d057c5a8 000000000000
       3       5 44844058ccce 68e9d057c5a8 000000000000
       4       6 bf3d9b744927 68e9d057c5a8 000000000000
       5       7 dde7c0af2a03 bf3d9b744927 44844058ccce

Merge keeping directory from parent 1 does not create revlog entry. (Note that
dir1's manifest does change, but only because dir1/a's filelog changes.)

  $ hg co 'desc("add dir2")'
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo 8 > dir2/a
  $ hg ci -m 'modify dir2/a'
  created new head

  $ hg debugindex --dir dir2 > before
  $ hg merge 'desc("modify dir1/a")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg revert -r 'desc("modify dir2/a")' .
  reverting dir1/a
  $ hg ci -m 'merge, keeping parent 1'
  $ hg debugindex --dir dir2 > after
  $ diff before after
  $ rm before after

Merge keeping directory from parent 2 does not create revlog entry. (Note that
dir2's manifest does change, but only because dir2/a's filelog changes.)

  $ hg co 'desc("modify dir2/a")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg debugindex --dir dir1 > before
  $ hg merge 'desc("modify dir1/a")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg revert -r 'desc("modify dir1/a")' .
  reverting dir2/a
  $ hg ci -m 'merge, keeping parent 2'
  created new head
  $ hg debugindex --dir dir1 > after
  $ diff before after
  $ rm before after

Create flat source repo for tests with mixed flat/tree manifests

  $ cd ..
  $ hg init repo-flat
  $ cd repo-flat

Create a few commits with flat manifest

  $ echo 0 > a
  $ echo 0 > b
  $ echo 0 > e
  $ for d in dir1 dir1/dir1 dir1/dir2 dir2
  > do
  >   mkdir $d
  >   echo 0 > $d/a
  >   echo 0 > $d/b
  > done
  $ hg ci -Aqm initial

  $ echo 1 > a
  $ echo 1 > dir1/a
  $ echo 1 > dir1/dir1/a
  $ hg ci -Aqm 'modify on branch 1'

  $ hg co 0
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo 2 > b
  $ echo 2 > dir1/b
  $ echo 2 > dir1/dir1/b
  $ hg ci -Aqm 'modify on branch 2'

  $ hg merge 1
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg ci -m 'merge of flat manifests to new flat manifest'

  $ cd ..
  $ hg -R repo-flat serve -p $HGPORT -d \
  >   --pid-file=port-0-hg.pid \
  >   --errorlog=port-0-errors.log
  $ cat port-0-hg.pid >> $DAEMON_PIDS

Create clone with tree manifests enabled

  $ hg clone --config experimental.treemanifest=1 \
  >   http://localhost:$HGPORT repo-mixed -r 1
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 14 changes to 11 files
  new changesets 5b02a3e8db7e:581ef6037d8b
  updating to branch default
  11 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cat port-0-errors.log
  $ cd repo-mixed
  $ test -d .hg/store/meta
  [1]
  $ hg debugrequires | grep treemanifest
  treemanifest

Should be possible to push updates from flat to tree manifest repo

  $ hg -R ../repo-flat push ssh://user@dummy/repo-mixed
  pushing to ssh://user@dummy/repo-mixed
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 2 changesets with 3 changes to 3 files

Commit should store revlog per directory

  $ hg co 1
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo 3 > a
  $ echo 3 > dir1/a
  $ echo 3 > dir1/dir1/a
  $ hg ci -m 'first tree'
  created new head
  $ find .hg/store/meta | sort
  .hg/store/meta
  .hg/store/meta/dir1
  .hg/store/meta/dir1/00manifest.i
  .hg/store/meta/dir1/dir1
  .hg/store/meta/dir1/dir1/00manifest.i
  .hg/store/meta/dir1/dir2
  .hg/store/meta/dir1/dir2/00manifest.i
  .hg/store/meta/dir2
  .hg/store/meta/dir2/00manifest.i

Merge of two trees

  $ hg co 2
  6 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg merge 1
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg ci -m 'merge of flat manifests to new tree manifest'
  created new head
  $ hg diff -r 3

Parent of tree root manifest should be flat manifest, and two for merge

  $ hg debugindex -m
     rev linkrev       nodeid    p1-nodeid    p2-nodeid
       0       0 40536115ed9e 000000000000 000000000000
       1       1 f3376063c255 40536115ed9e 000000000000
       2       2 5d9b9da231a2 40536115ed9e 000000000000
       3       3 d17d663cbd8a 5d9b9da231a2 f3376063c255
       4       4 51e32a8c60ee f3376063c255 000000000000
       5       5 cc5baa78b230 5d9b9da231a2 f3376063c255


Status across flat/tree boundary should work

  $ hg status --rev '.^' --rev .
  M a
  M dir1/a
  M dir1/dir1/a


Turning off treemanifest config has no effect

  $ hg debugindex --dir dir1
     rev linkrev       nodeid    p1-nodeid    p2-nodeid
       0       4 064927a0648a 000000000000 000000000000
       1       5 25ecb8cb8618 000000000000 000000000000
  $ echo 2 > dir1/a
  $ hg --config experimental.treemanifest=False ci -qm 'modify dir1/a'
  $ hg debugindex --dir dir1
     rev linkrev       nodeid    p1-nodeid    p2-nodeid
       0       4 064927a0648a 000000000000 000000000000
       1       5 25ecb8cb8618 000000000000 000000000000
       2       6 5b16163a30c6 25ecb8cb8618 000000000000

Stripping and recovering changes should work

  $ hg st --change tip
  M dir1/a
  $ hg --config extensions.strip= strip tip
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  saved backup bundle to $TESTTMP/repo-mixed/.hg/strip-backup/51cfd7b1e13b-78a2f3ed-backup.hg
  $ hg debugindex --dir dir1
     rev linkrev       nodeid    p1-nodeid    p2-nodeid
       0       4 064927a0648a 000000000000 000000000000
       1       5 25ecb8cb8618 000000000000 000000000000

#if repobundlerepo
  $ hg incoming .hg/strip-backup/*
  comparing with .hg/strip-backup/*-backup.hg (glob)
  searching for changes
  changeset:   6:51cfd7b1e13b
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     modify dir1/a
  
#endif

  $ hg unbundle .hg/strip-backup/*
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 51cfd7b1e13b (1 drafts)
  (run 'hg update' to get a working copy)
  $ hg --config extensions.strip= strip tip
  saved backup bundle to $TESTTMP/repo-mixed/.hg/strip-backup/*-backup.hg (glob)
  $ hg unbundle -q .hg/strip-backup/*
  $ hg debugindex --dir dir1
     rev linkrev       nodeid    p1-nodeid    p2-nodeid
       0       4 064927a0648a 000000000000 000000000000
       1       5 25ecb8cb8618 000000000000 000000000000
       2       6 5b16163a30c6 25ecb8cb8618 000000000000
  $ hg st --change tip
  M dir1/a

Shelving and unshelving should work

  $ echo foo >> dir1/a
  $ hg shelve
  shelved as default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg unshelve
  unshelving change 'default'
  $ hg diff --nodates
  diff -r 708a273da119 dir1/a
  --- a/dir1/a
  +++ b/dir1/a
  @@ -1,1 +1,2 @@
   1
  +foo

Pushing from treemanifest repo to an empty repo makes that a treemanifest repo

  $ cd ..
  $ hg init empty-repo
  $ cat << EOF >> empty-repo/.hg/hgrc
  > [experimental]
  > changegroup3=yes
  > EOF
  $ hg debugrequires -R empty-repo | grep treemanifest
  [1]
  $ hg push -R repo -r 0 empty-repo
  pushing to empty-repo
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 2 changes to 2 files
  $ hg debugrequires -R empty-repo | grep treemanifest
  treemanifest

Pushing to an empty repo works

  $ hg --config experimental.treemanifest=1 init clone
  $ hg debugrequires -R clone | grep treemanifest
  treemanifest
  $ hg push -R repo clone
  pushing to clone
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 11 changesets with 15 changes to 10 files (+3 heads)
  $ hg debugrequires -R clone | grep treemanifest
  treemanifest
  $ hg -R clone verify -q

Create deeper repo with tree manifests.

  $ hg --config experimental.treemanifest=True init deeprepo
  $ cd deeprepo

  $ mkdir .A
  $ mkdir b
  $ mkdir b/bar
  $ mkdir b/bar/orange
  $ mkdir b/bar/orange/fly
  $ mkdir b/foo
  $ mkdir b/foo/apple
  $ mkdir b/foo/apple/bees

  $ touch .A/one.txt
  $ touch .A/two.txt
  $ touch b/bar/fruits.txt
  $ touch b/bar/orange/fly/gnat.py
  $ touch b/bar/orange/fly/housefly.txt
  $ touch b/foo/apple/bees/flower.py
  $ touch c.txt
  $ touch d.py

  $ hg ci -Aqm 'initial'

  $ echo >> .A/one.txt
  $ echo >> .A/two.txt
  $ echo >> b/bar/fruits.txt
  $ echo >> b/bar/orange/fly/gnat.py
  $ echo >> b/bar/orange/fly/housefly.txt
  $ echo >> b/foo/apple/bees/flower.py
  $ echo >> c.txt
  $ echo >> d.py
  $ hg ci -Aqm 'second'

We'll see that visitdir works by removing some treemanifest revlogs and running
the files command with various parameters.

Test files from the root.

  $ hg files -r .
  .A/one.txt
  .A/two.txt
  b/bar/fruits.txt
  b/bar/orange/fly/gnat.py
  b/bar/orange/fly/housefly.txt
  b/foo/apple/bees/flower.py
  c.txt
  d.py

Excludes with a glob should not exclude everything from the glob's root

  $ hg files -r . -X 'b/fo?' b
  b/bar/fruits.txt
  b/bar/orange/fly/gnat.py
  b/bar/orange/fly/housefly.txt
  $ cp -R .hg/store .hg/store-copy

Test files for a subdirectory.

#if reporevlogstore
  $ rm -r .hg/store/meta/~2e_a
#endif
#if reposimplestore
  $ rm -r .hg/store/meta/._a
#endif
  $ hg files -r . b
  b/bar/fruits.txt
  b/bar/orange/fly/gnat.py
  b/bar/orange/fly/housefly.txt
  b/foo/apple/bees/flower.py
  $ hg diff -r '.^' -r . --stat b
   b/bar/fruits.txt              |  1 +
   b/bar/orange/fly/gnat.py      |  1 +
   b/bar/orange/fly/housefly.txt |  1 +
   b/foo/apple/bees/flower.py    |  1 +
   4 files changed, 4 insertions(+), 0 deletions(-)
  $ cp -R .hg/store-copy/. .hg/store

Test files with just includes and excludes.

#if reporevlogstore
  $ rm -r .hg/store/meta/~2e_a
#endif
#if reposimplestore
  $ rm -r .hg/store/meta/._a
#endif
  $ rm -r .hg/store/meta/b/bar/orange/fly
  $ rm -r .hg/store/meta/b/foo/apple/bees
  $ hg files -r . -I path:b/bar -X path:b/bar/orange/fly -I path:b/foo -X path:b/foo/apple/bees
  b/bar/fruits.txt
  $ hg diff -r '.^' -r . --stat -I path:b/bar -X path:b/bar/orange/fly -I path:b/foo -X path:b/foo/apple/bees
   b/bar/fruits.txt |  1 +
   1 files changed, 1 insertions(+), 0 deletions(-)
  $ cp -R .hg/store-copy/. .hg/store

Test files for a subdirectory, excluding a directory within it.

#if reporevlogstore
  $ rm -r .hg/store/meta/~2e_a
#endif
#if reposimplestore
  $ rm -r .hg/store/meta/._a
#endif
  $ rm -r .hg/store/meta/b/foo
  $ hg files -r . -X path:b/foo b
  b/bar/fruits.txt
  b/bar/orange/fly/gnat.py
  b/bar/orange/fly/housefly.txt
  $ hg diff -r '.^' -r . --stat -X path:b/foo b
   b/bar/fruits.txt              |  1 +
   b/bar/orange/fly/gnat.py      |  1 +
   b/bar/orange/fly/housefly.txt |  1 +
   3 files changed, 3 insertions(+), 0 deletions(-)
  $ cp -R .hg/store-copy/. .hg/store

Test files for a sub directory, including only a directory within it, and
including an unrelated directory.

#if reporevlogstore
  $ rm -r .hg/store/meta/~2e_a
#endif
#if reposimplestore
  $ rm -r .hg/store/meta/._a
#endif
  $ rm -r .hg/store/meta/b/foo
  $ hg files -r . -I path:b/bar/orange -I path:a b
  b/bar/orange/fly/gnat.py
  b/bar/orange/fly/housefly.txt
  $ hg diff -r '.^' -r . --stat -I path:b/bar/orange -I path:a b
   b/bar/orange/fly/gnat.py      |  1 +
   b/bar/orange/fly/housefly.txt |  1 +
   2 files changed, 2 insertions(+), 0 deletions(-)
  $ cp -R .hg/store-copy/. .hg/store

Test files for a pattern, including a directory, and excluding a directory
within that.

#if reporevlogstore
  $ rm -r .hg/store/meta/~2e_a
#endif
#if reposimplestore
  $ rm -r .hg/store/meta/._a
#endif
  $ rm -r .hg/store/meta/b/foo
  $ rm -r .hg/store/meta/b/bar/orange
  $ hg files -r . glob:**.txt -I path:b/bar -X path:b/bar/orange
  b/bar/fruits.txt
  $ hg diff -r '.^' -r . --stat glob:**.txt -I path:b/bar -X path:b/bar/orange
   b/bar/fruits.txt |  1 +
   1 files changed, 1 insertions(+), 0 deletions(-)
  $ cp -R .hg/store-copy/. .hg/store

Add some more changes to the deep repo
  $ echo narf >> b/bar/fruits.txt
  $ hg ci -m narf
  $ echo troz >> b/bar/orange/fly/gnat.py
  $ hg ci -m troz

Verify works
  $ hg verify -q

#if repofncache
Dirlogs are included in fncache
  $ grep meta/.A/00manifest.i .hg/store/fncache
  meta/.A/00manifest.i

Rebuilt fncache includes dirlogs
  $ rm .hg/store/fncache
  $ hg debugrebuildfncache
  adding data/.A/one.txt.i
  adding data/.A/two.txt.i
  adding data/b/bar/fruits.txt.i
  adding data/b/bar/orange/fly/gnat.py.i
  adding data/b/bar/orange/fly/housefly.txt.i
  adding data/b/foo/apple/bees/flower.py.i
  adding data/c.txt.i
  adding data/d.py.i
  adding meta/.A/00manifest.i
  adding meta/b/00manifest.i
  adding meta/b/bar/00manifest.i
  adding meta/b/bar/orange/00manifest.i
  adding meta/b/bar/orange/fly/00manifest.i
  adding meta/b/foo/00manifest.i
  adding meta/b/foo/apple/00manifest.i
  adding meta/b/foo/apple/bees/00manifest.i
  16 items added, 0 removed from fncache
#endif

Finish first server
  $ killdaemons.py

Back up the recently added revlogs
  $ cp -R .hg/store .hg/store-newcopy

Verify reports missing dirlog
  $ rm .hg/store/meta/b/00manifest.*
  $ hg verify
  checking changesets
  checking manifests
  checking directory manifests
   0: empty or missing b/
   b/@0: parent-directory manifest refers to unknown revision 67688a370455
   b/@1: parent-directory manifest refers to unknown revision f065da70369e
   b/@2: parent-directory manifest refers to unknown revision ac0d30948e0b
   b/@3: parent-directory manifest refers to unknown revision 367152e6af28
  warning: orphan data file 'meta/b/bar/00manifest.i' (reporevlogstore !)
  warning: orphan data file 'meta/b/bar/orange/00manifest.i' (reporevlogstore !)
  warning: orphan data file 'meta/b/bar/orange/fly/00manifest.i' (reporevlogstore !)
  warning: orphan data file 'meta/b/foo/00manifest.i' (reporevlogstore !)
  warning: orphan data file 'meta/b/foo/apple/00manifest.i' (reporevlogstore !)
  warning: orphan data file 'meta/b/foo/apple/bees/00manifest.i' (reporevlogstore !)
  crosschecking files in changesets and manifests
   b/bar/fruits.txt@0: in changeset but not in manifest
   b/bar/orange/fly/gnat.py@0: in changeset but not in manifest
   b/bar/orange/fly/housefly.txt@0: in changeset but not in manifest
   b/foo/apple/bees/flower.py@0: in changeset but not in manifest
  checking files
  not checking dirstate because of previous errors
  checked 4 changesets with 18 changes to 8 files
  6 warnings encountered! (reporevlogstore !)
  9 integrity errors encountered!
  (first damaged changeset appears to be 0)
  [1]
  $ cp -R .hg/store-newcopy/. .hg/store

Verify reports missing dirlog entry
  $ mv -f .hg/store-copy/meta/b/00manifest.* .hg/store/meta/b/
  $ hg verify
  checking changesets
  checking manifests
  checking directory manifests
   b/@2: parent-directory manifest refers to unknown revision ac0d30948e0b
   b/@3: parent-directory manifest refers to unknown revision 367152e6af28
   b/bar/@?: rev 2 points to unexpected changeset 2
   b/bar/@?: 44d7e1146e0d not in parent-directory manifest
   b/bar/@?: rev 3 points to unexpected changeset 3
   b/bar/@?: 70b10c6b17b7 not in parent-directory manifest
   b/bar/orange/@?: rev 2 points to unexpected changeset 3
   (expected None)
   b/bar/orange/fly/@?: rev 2 points to unexpected changeset 3
   (expected None)
  crosschecking files in changesets and manifests
  checking files
  not checking dirstate because of previous errors
  checked 4 changesets with 18 changes to 8 files
  2 warnings encountered!
  8 integrity errors encountered!
  (first damaged changeset appears to be 2)
  [1]
  $ cp -R .hg/store-newcopy/. .hg/store

Test cloning a treemanifest repo over http.
  $ cd ..
  $ hg -R deeprepo serve -p $HGPORT -d \
  >   --pid-file=port-0-hg.pid \
  >   --errorlog=port-0-errors.log
  $ cat port-0-hg.pid >> $DAEMON_PIDS

We can clone even with the knob turned off and we'll get a treemanifest repo.
  $ hg clone --config experimental.treemanifest=False \
  >   --config experimental.changegroup3=True \
  >   http://localhost:$HGPORT deepclone
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 18 changes to 8 files
  new changesets 775704be6f52:523e5c631710
  updating to branch default
  8 files updated, 0 files merged, 0 files removed, 0 files unresolved
No server errors.
  $ cat port-0-errors.log

requires got updated to include treemanifest
  $ hg debugrequires -R deepclone | grep treemanifest
  treemanifest
Tree manifest revlogs exist.
  $ find deepclone/.hg/store/meta | sort
  deepclone/.hg/store/meta
  deepclone/.hg/store/meta/._a (reposimplestore !)
  deepclone/.hg/store/meta/._a/00manifest.i (reposimplestore !)
  deepclone/.hg/store/meta/b
  deepclone/.hg/store/meta/b/00manifest.i
  deepclone/.hg/store/meta/b/bar
  deepclone/.hg/store/meta/b/bar/00manifest.i
  deepclone/.hg/store/meta/b/bar/orange
  deepclone/.hg/store/meta/b/bar/orange/00manifest.i
  deepclone/.hg/store/meta/b/bar/orange/fly
  deepclone/.hg/store/meta/b/bar/orange/fly/00manifest.i
  deepclone/.hg/store/meta/b/foo
  deepclone/.hg/store/meta/b/foo/00manifest.i
  deepclone/.hg/store/meta/b/foo/apple
  deepclone/.hg/store/meta/b/foo/apple/00manifest.i
  deepclone/.hg/store/meta/b/foo/apple/bees
  deepclone/.hg/store/meta/b/foo/apple/bees/00manifest.i
  deepclone/.hg/store/meta/~2e_a (reporevlogstore !)
  deepclone/.hg/store/meta/~2e_a/00manifest.i (reporevlogstore !)
Verify passes.
  $ cd deepclone
  $ hg verify -q
  $ cd ..

#if reporevlogstore
Create clones using old repo formats to use in later tests
  $ hg clone --config format.usestore=False \
  >   --config experimental.changegroup3=True \
  >   http://localhost:$HGPORT deeprepo-basicstore
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 18 changes to 8 files
  new changesets 775704be6f52:523e5c631710
  updating to branch default
  8 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg -R deeprepo-basicstore debugrequires | grep store
  [1]
  $ hg -R deeprepo-basicstore serve -p $HGPORT1 -d \
  >   --pid-file=port-1-hg.pid \
  >   --errorlog=port-1-errors.log
  $ cat port-1-hg.pid >> $DAEMON_PIDS

  $ hg clone --config format.usefncache=False \
  >   --config experimental.changegroup3=True \
  >   http://localhost:$HGPORT deeprepo-encodedstore
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 18 changes to 8 files
  new changesets 775704be6f52:523e5c631710
  updating to branch default
  8 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg -R deeprepo-encodedstore debugrequires | grep fncache
  [1]
  $ hg -R deeprepo-encodedstore serve -p $HGPORT2 -d \
  >   --pid-file=port-2-hg.pid \
  >   --errorlog=port-2-errors.log
  $ cat port-2-hg.pid >> $DAEMON_PIDS

Local clone with basicstore
  $ hg clone -U deeprepo-basicstore local-clone-basicstore
  $ hg -R local-clone-basicstore verify -q

Local clone with encodedstore
  $ hg clone -U deeprepo-encodedstore local-clone-encodedstore
  $ hg -R local-clone-encodedstore verify -q

Local clone with fncachestore
  $ hg clone -U deeprepo local-clone-fncachestore
  $ hg -R local-clone-fncachestore verify -q

Stream clone with basicstore
  $ hg clone --config experimental.changegroup3=True --stream -U \
  >   http://localhost:$HGPORT1 stream-clone-basicstore
  streaming all changes
  28 files to transfer, * of data (glob)
  transferred * in * seconds (*) (glob)
  $ hg -R stream-clone-basicstore verify -q
  $ cat port-1-errors.log

Stream clone with encodedstore
  $ hg clone --config experimental.changegroup3=True --stream -U \
  >   http://localhost:$HGPORT2 stream-clone-encodedstore
  streaming all changes
  28 files to transfer, * of data (glob)
  transferred * in * seconds (*) (glob)
  $ hg -R stream-clone-encodedstore verify -q
  $ cat port-2-errors.log

Stream clone with fncachestore
  $ hg clone --config experimental.changegroup3=True --stream -U \
  >   http://localhost:$HGPORT stream-clone-fncachestore
  streaming all changes
  22 files to transfer, * of data (glob)
  transferred * in * seconds (*) (glob)
  $ hg -R stream-clone-fncachestore verify -q
  $ cat port-0-errors.log

Packed bundle
  $ hg -R deeprepo debugcreatestreamclonebundle repo-packed.hg
  writing 5330 bytes for 18 files (no-zstd !)
  writing 5400 bytes for 18 files (zstd !)
  bundle requirements:.* treemanifest(,.*)? (re)
  $ hg debugbundle --spec repo-packed.hg
  none-packed1;requirements%3D(.*%2C)?treemanifest(%2C.*)? (re)

#endif

Bundle with changegroup2 is not supported

  $ hg -R deeprepo bundle --all -t v2 deeprepo.bundle
  abort: repository does not support bundle version 02
  [255]

Pull does not include changegroup for manifest the client already has from
other branch

  $ mkdir grafted-dir-repo
  $ cd grafted-dir-repo
  $ hg --config experimental.treemanifest=1 init
  $ mkdir dir
  $ echo a > dir/file
  $ echo a > file
  $ hg ci -Am initial
  adding dir/file
  adding file
  $ echo b > dir/file
  $ hg ci -m updated
  $ hg co '.^'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg revert -r tip dir/
  reverting dir/file
  $ echo b > file # to make sure root manifest is sent
  $ hg ci -m grafted
  created new head
  $ cd ..

  $ hg --config experimental.treemanifest=1 clone --pull -r 1 \
  >   grafted-dir-repo grafted-dir-repo-clone
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 3 changes to 2 files
  new changesets d84f4c419457:09ab742f3b0f
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd grafted-dir-repo-clone
  $ hg pull -r 2
  pulling from $TESTTMP/grafted-dir-repo
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 73699489fb7c
  (run 'hg heads' to see heads, 'hg merge' to merge)

Committing a empty commit does not duplicate root treemanifest
  $ echo z >> z
  $ hg commit -Aqm 'pre-empty commit'
  $ hg rm z
  $ hg commit --amend -m 'empty commit'
  saved backup bundle to $TESTTMP/grafted-dir-repo-clone/.hg/strip-backup/cb99d5717cea-9e3b6b02-amend.hg
  $ hg log -r 'tip + tip^' -T '{manifest}\n'
  1:678d3574b88c
  1:678d3574b88c
  $ hg --config extensions.strip= strip -r . -q

Testing repository upgrade
--------------------------

  $ for x in 1 2 3 4 5 6 7 8 9; do
  >    echo $x > file-$x # make sure we have interresting compression
  >    echo $x > dir/foo-$x # make sure we have interresting compression
  >    hg add file-$x
  >    hg add dir/foo-$x
  > done
  $ hg ci -m 'have some content'
  $ f -s .hg/store/00manifest.*
  .hg/store/00manifest.i: size=798 (no-pure !)
  .hg/store/00manifest.i: size=784 (pure !)
  $ f -s .hg/store/meta/dir/00manifest*
  .hg/store/meta/dir/00manifest.i: size=556 (no-pure !)
  .hg/store/meta/dir/00manifest.i: size=544 (pure !)
  $ hg debugupgraderepo --config format.revlog-compression=none --config experimental.treemanifest=yes --run --quiet --no-backup
  upgrade will perform the following actions:
  
  requirements
     preserved: * (glob)
     removed: revlog-compression-zstd (no-pure !)
     added: exp-compression-none
  
  processed revlogs:
    - all-filelogs
    - changelog
    - manifest
  
  $ hg verify
  checking changesets
  checking manifests
  checking directory manifests
  crosschecking files in changesets and manifests
  checking files
  checking dirstate
  checked 4 changesets with 22 changes to 20 files
  $ f -s .hg/store/00manifest.*
  .hg/store/00manifest.i: size=1002
  $ f -s .hg/store/meta/dir/00manifest*
  .hg/store/meta/dir/00manifest.i: size=721
  $ hg files --rev tip | wc -l
  \s*20 (re)

testing cache update warming persistent nodemaps
------------------------------------------------

  $ hg debugupdatecache