annotate mercurial/destutil.py @ 39338:57f9b3d91abc

minirst: remove unused function decorateblocks()

It was added at ee6988aea74e "minirst: add decorateblocks search helper",
but it's been unused since then.

# destutil.py - Mercurial utility function for command destination
#
#  Copyright Matt Mackall <[e-mail]> and other
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

from __future__ import absolute_import

from .i18n import _
from . import (
    bookmarks,
    error,
    obsutil,
    scmutil,
    stack
)

def orphanpossibledestination(repo, rev):
    """Return all changesets that may be a new parent for orphan `rev`.

    This function works fine on non-orphan revisions, it's just silly
    because there's no destination implied by obsolete markers, so
    it'll return nothing.
    """
    tonode = repo.changelog.node
    parents = repo.changelog.parentrevs
    torev = repo.changelog.rev
    dest = set()
    tovisit = list(parents(rev))
    while tovisit:
        r = tovisit.pop()
        succsets = obsutil.successorssets(repo, tonode(r))
        if not succsets:
            # if there are no successors for r, r was probably pruned
            # and we should walk up to r's parents to try and find
            # some successors.
            tovisit.extend(parents(r))
        else:
            # We should probably pick only one destination from split
            # (case where '1 < len(ss)'), This could be the currently
            # tipmost, but the correct result is less clear when
            # results of the split have been moved such that they
            # reside on multiple branches.
            for ss in succsets:
                for n in ss:
                    dr = torev(n)
                    if dr != -1:
                        dest.add(dr)
    return dest

def _destupdateobs(repo, clean):
    """decide of an update destination from obsolescence markers"""
    node = None
    wc = repo[None]
    p1 = wc.p1()
    movemark = None

    if p1.obsolete() and not p1.children():
        # allow updating to successors
        successors = obsutil.successorssets(repo, p1.node())

        # behavior of certain cases is as follows,
        #
        # divergent changesets: update to highest rev, similar to what
        #     is currently done when there are more than one head
        #     (i.e. 'tip')
        #
        # replaced changesets: same as divergent except we know there
        # is no conflict
        #
        # pruned changeset: no update is done; though, we could
        #     consider updating to the first non-obsolete parent,
        #     similar to what is current done for 'hg prune'

        if successors:
            # flatten the list here handles both divergent (len > 1)
            # and the usual case (len = 1)
            successors = [n for sub in successors for n in sub]

            # get the max revision for the given successors set,
            # i.e. the 'tip' of a set
            node = repo.revs('max(%ln)', successors).first()
            if bookmarks.isactivewdirparent(repo):
                movemark = repo['.'].node()
    return node, movemark, None

def _destupdatebook(repo, clean):
    """decide on an update destination from active bookmark"""
    # we also move the active bookmark, if any
    node = None
    activemark, movemark = bookmarks.calculateupdate(repo.ui, repo)
    if activemark is not None:
        node = repo._bookmarks[activemark]
    return node, movemark, activemark

def _destupdatebranch(repo, clean):
    """decide on an update destination from current branch

    This ignores closed branch heads.
    """
    wc = repo[None]
    movemark = node = None
    currentbranch = wc.branch()

    if clean:
        currentbranch = repo['.'].branch()

    if currentbranch in repo.branchmap():
        heads = repo.branchheads(currentbranch)
        if heads:
            node = repo.revs('max(.::(%ln))', heads).first()
        if bookmarks.isactivewdirparent(repo):
            movemark = repo['.'].node()
    elif currentbranch == 'default' and not wc.p1():
        # "null" parent belongs to "default" branch, but it doesn't exist, so
        # update to the tipmost non-closed branch head
        node = repo.revs('max(head() and not closed())').first()
    else:
        node = repo['.'].node()
    return node, movemark, None

def _destupdatebranchfallback(repo, clean):
    """decide on an update destination from closed heads in current branch"""
    wc = repo[None]
    currentbranch = wc.branch()
    movemark = None
    if currentbranch in repo.branchmap():
        # here, all descendant branch heads are closed
        heads = repo.branchheads(currentbranch, closed=True)
        assert heads, "any branch has at least one head"
        node = repo.revs('max(.::(%ln))', heads).first()
        assert node is not None, ("any revision has at least "
                                  "one descendant branch head")
        if bookmarks.isactivewdirparent(repo):
            movemark = repo['.'].node()
    else:
        # here, no "default" branch, and all branches are closed
        node = repo.lookup('tip')
        assert node is not None, "'tip' exists even in empty repository"
    return node, movemark, None

# order in which each step should be evaluated
# steps are run until one finds a destination
destupdatesteps = ['evolution', 'bookmark', 'branch', 'branchfallback']
# mapping to ease extension overriding steps.
destupdatestepmap = {'evolution': _destupdateobs,
                     'bookmark': _destupdatebook,
                     'branch': _destupdatebranch,
                     'branchfallback': _destupdatebranchfallback,
                     }

def destupdate(repo, clean=False):
    """destination for bare update operation

    return (rev, movemark, activemark)

    - rev: the revision to update to,
    - movemark: node to move the active bookmark from
                (cf bookmark.calculate update),
    - activemark: a bookmark to activate at the end of the update.
    """
    node = movemark = activemark = None

    for step in destupdatesteps:
        node, movemark, activemark = destupdatestepmap[step](repo, clean)
        if node is not None:
            break
    rev = repo[node].rev()

    return rev, movemark, activemark

msgdestmerge = {
    # too many matching divergent bookmark
    'toomanybookmarks':
        {'merge':
            (_("multiple matching bookmarks to merge -"
               " please merge with an explicit rev or bookmark"),
             _("run 'hg heads' to see all heads")),
         'rebase':
            (_("multiple matching bookmarks to rebase -"
               " please rebase to an explicit rev or bookmark"),
             _("run 'hg heads' to see all heads")),
        },
    # no other matching divergent bookmark
    'nootherbookmarks':
        {'merge':
            (_("no matching bookmark to merge - "
               "please merge with an explicit rev or bookmark"),
             _("run 'hg heads' to see all heads")),
         'rebase':
            (_("no matching bookmark to rebase - "
               "please rebase to an explicit rev or bookmark"),
             _("run 'hg heads' to see all heads")),
        },
    # branch have too many unbookmarked heads, no obvious destination
    'toomanyheads':
        {'merge':
            (_("branch '%s' has %d heads - please merge with an explicit rev"),
             _("run 'hg heads .' to see heads")),
         'rebase':
            (_("branch '%s' has %d heads - please rebase to an explicit rev"),
             _("run 'hg heads .' to see heads")),
        },
    # branch have no other unbookmarked heads
    'bookmarkedheads':
        {'merge':
            (_("heads are bookmarked - please merge with an explicit rev"),
             _("run 'hg heads' to see all heads")),
         'rebase':
            (_("heads are bookmarked - please rebase to an explicit rev"),
             _("run 'hg heads' to see all heads")),
        },
    # branch have just a single heads, but there is other branches
    'nootherbranchheads':
        {'merge':
            (_("branch '%s' has one head - please merge with an explicit rev"),
             _("run 'hg heads' to see all heads")),
         'rebase':
            (_("branch '%s' has one head - please rebase to an explicit rev"),
             _("run 'hg heads' to see all heads")),
        },
    # repository have a single head
    'nootherheads':
        {'merge':
            (_('nothing to merge'),
            None),
         'rebase':
            (_('nothing to rebase'),
            None),
        },
    # repository have a single head and we are not on it
    'nootherheadsbehind':
        {'merge':
            (_('nothing to merge'),
             _("use 'hg update' instead")),
         'rebase':
            (_('nothing to rebase'),
             _("use 'hg update' instead")),
        },
    # We are not on a head
    'notatheads':
        {'merge':
            (_('working directory not at a head revision'),
             _("use 'hg update' or merge with an explicit revision")),
         'rebase':
            (_('working directory not at a head revision'),
             _("use 'hg update' or rebase to an explicit revision"))
        },
    'emptysourceset':
        {'merge':
            (_('source set is empty'),
             None),
         'rebase':
            (_('source set is empty'),
             None),
        },
    'multiplebranchessourceset':
        {'merge':
            (_('source set is rooted in multiple branches'),
             None),
         'rebase':
            (_('rebaseset is rooted in multiple named branches'),
             _('specify an explicit destination with --dest')),
        },
    }

def _destmergebook(repo, action='merge', sourceset=None, destspace=None):
    """find merge destination in the active bookmark case"""
    node = None
    bmheads = bookmarks.headsforactive(repo)
    curhead = repo._bookmarks[repo._activebookmark]
    if len(bmheads) == 2:
        if curhead == bmheads[0]:
            node = bmheads[1]
        else:
            node = bmheads[0]
    elif len(bmheads) > 2:
        msg, hint = msgdestmerge['toomanybookmarks'][action]
        raise error.ManyMergeDestAbort(msg, hint=hint)
    elif len(bmheads) <= 1:
        msg, hint = msgdestmerge['nootherbookmarks'][action]
        raise error.NoMergeDestAbort(msg, hint=hint)
    assert node is not None
    return node

def _destmergebranch(repo, action='merge', sourceset=None, onheadcheck=True,
                     destspace=None):
    """find merge destination based on branch heads"""
    node = None

    if sourceset is None:
        sourceset = [repo[repo.dirstate.p1()].rev()]
        branch = repo.dirstate.branch()
    elif not sourceset:
        msg, hint = msgdestmerge['emptysourceset'][action]
        raise error.NoMergeDestAbort(msg, hint=hint)
    else:
        branch = None
        for ctx in repo.set('roots(%ld::%ld)', sourceset, sourceset):
            if branch is not None and ctx.branch() != branch:
                msg, hint = msgdestmerge['multiplebranchessourceset'][action]
                raise error.ManyMergeDestAbort(msg, hint=hint)
            branch = ctx.branch()

    bheads = repo.branchheads(branch)
    onhead = repo.revs('%ld and %ln', sourceset, bheads)
    if onheadcheck and not onhead:
        # Case A: working copy if not on a head. (merge only)
        #
        # This is probably a user mistake We bailout pointing at 'hg update'
        if len(repo.heads()) <= 1:
            msg, hint = msgdestmerge['nootherheadsbehind'][action]
        else:
            msg, hint = msgdestmerge['notatheads'][action]
        raise error.Abort(msg, hint=hint)
    # remove heads descendants of source from the set
    bheads = list(repo.revs('%ln - (%ld::)', bheads, sourceset))
    # filters out bookmarked heads
    nbhs = list(repo.revs('%ld - bookmark()', bheads))

    if destspace is not None:
        # restrict search space
        # used in the 'hg pull --rebase' case, see issue 5214.
        nbhs = list(repo.revs('%ld and %ld', destspace, nbhs))

    if len(nbhs) > 1:
        # Case B: There is more than 1 other anonymous heads
        #
        # This means that there will be more than 1 candidate. This is
        # ambiguous. We abort asking the user to pick as explicit destination
        # instead.
        msg, hint = msgdestmerge['toomanyheads'][action]
        msg %= (branch, len(bheads) + 1)
        raise error.ManyMergeDestAbort(msg, hint=hint)
    elif not nbhs:
        # Case B: There is no other anonymous heads
        #
        # This means that there is no natural candidate to merge with.
        # We abort, with various messages for various cases.
        if bheads:
            msg, hint = msgdestmerge['bookmarkedheads'][action]
        elif len(repo.heads()) > 1:
            msg, hint = msgdestmerge['nootherbranchheads'][action]
            msg %= branch
        elif not onhead:
            # if 'onheadcheck == False' (rebase case),
            # this was not caught in Case A.
            msg, hint = msgdestmerge['nootherheadsbehind'][action]
        else:
            msg, hint = msgdestmerge['nootherheads'][action]
        raise error.NoMergeDestAbort(msg, hint=hint)
    else:
        node = nbhs[0]
    assert node is not None
    return node

def destmerge(repo, action='merge', sourceset=None, onheadcheck=True,
              destspace=None):
    """return the default destination for a merge

    (or raise exception about why it can't pick one)

    :action: the action being performed, controls emitted error message
    """
    # destspace is here to work around issues with `hg pull --rebase` see
    # issue5214 for details
    if repo._activebookmark:
        node = _destmergebook(repo, action=action, sourceset=sourceset,
                              destspace=destspace)
    else:
        node = _destmergebranch(repo, action=action, sourceset=sourceset,
                                onheadcheck=onheadcheck, destspace=destspace)
    return repo[node].rev()

def desthistedit(ui, repo):
    """Default base revision to edit for `hg histedit`."""
    default = ui.config('histedit', 'defaultrev')

    if default is None:
        revs = stack.getstack(repo)
    elif default:
        revs = scmutil.revrange(repo, [default])

    if revs:
        # Take the first revision of the revset as the root
        return revs.min()

    return None

def stackbase(ui, repo):
    revs = stack.getstack(repo)
    return revs.first() if revs else None

def _statusotherbook(ui, repo):
    bmheads = bookmarks.headsforactive(repo)
    curhead = repo._bookmarks[repo._activebookmark]
    if repo.revs('%n and parents()', curhead):
        # we are on the active bookmark
        bmheads = [b for b in bmheads if curhead != b]
        if bmheads:
            msg = _('%i other divergent bookmarks for "%s"\n')
            ui.status(msg % (len(bmheads), repo._activebookmark))

def _statusotherbranchheads(ui, repo):
    currentbranch = repo.dirstate.branch()
    allheads = repo.branchheads(currentbranch, closed=True)
    heads = repo.branchheads(currentbranch)
    if repo.revs('%ln and parents()', allheads):
        # we are on a head, even though it might be closed
        #
        #  on closed otherheads
        #  ========= ==========
        #      o        0       all heads for current branch are closed
        #               N       only descendant branch heads are closed
        #      x        0       there is only one non-closed branch head
        #               N       there are some non-closed branch heads
        #  ========= ==========
        otherheads = repo.revs('%ln - parents()', heads)
        if repo['.'].closesbranch():
            ui.warn(_('no open descendant heads on branch "%s", '
                        'updating to a closed head\n') %
                      (currentbranch))
            if otherheads:
                ui.warn(_("(committing will reopen the head, "
                            "use 'hg heads .' to see %i other heads)\n") %
                          (len(otherheads)))
            else:
                ui.warn(_('(committing will reopen branch "%s")\n') %
                          (currentbranch))
        elif otherheads:
            curhead = repo['.']
            ui.status(_('updated to "%s: %s"\n') % (curhead,
                                    curhead.description().split('\n')[0]))
            ui.status(_('%i other heads for branch "%s"\n') %
                      (len(otherheads), currentbranch))

def statusotherdests(ui, repo):
    """Print message about other head"""
    # XXX we should probably include a hint:
    # - about what to do
    # - how to see such heads
    if repo._activebookmark:
        _statusotherbook(ui, repo)
    else:
        _statusotherbranchheads(ui, repo)