tests/test-phases-exchange.t

phases: change publish behavior to only alter behavior when server.

Older publish=True was:

  1) Content of Publishing server are seen as public by client.
  2) Any changegroup *added* to a publish=True server is public.

New definition are:

  1) Content of Publishing server are seen as public by client.
  2) Any changegroup *pushed* to a publish=True server is public.

See mercurial/phase.py documentation for exact final behavior

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > graphlog=
  > EOF
  $ alias hgph='hg log --template "{rev} {phase} {desc} - {node|short}\n"'

  $ mkcommit() {
  >    echo "$1" > "$1"
  >    hg add "$1"
  >    hg ci -m "$1"
  > }

  $ hg init alpha
  $ cd alpha
  $ mkcommit a-A
  $ mkcommit a-B
  $ mkcommit a-C
  $ mkcommit a-D
  $ hgph
  3 1 a-D - b555f63b6063
  2 1 a-C - 54acac6f23ab
  1 1 a-B - 548a3d25dbf0
  0 1 a-A - 054250a37db4

  $ hg init ../beta
  $ hg push -r 1 ../beta
  pushing to ../beta
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  $ hgph
  3 1 a-D - b555f63b6063
  2 1 a-C - 54acac6f23ab
  1 0 a-B - 548a3d25dbf0
  0 0 a-A - 054250a37db4

  $ cd ../beta
  $ hgph
  1 0 a-B - 548a3d25dbf0
  0 0 a-A - 054250a37db4
  $ hg up -q
  $ mkcommit b-A
  $ hgph
  2 1 b-A - f54f1bb90ff3
  1 0 a-B - 548a3d25dbf0
  0 0 a-A - 054250a37db4
  $ hg pull ../alpha
  pulling from ../alpha
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files (+1 heads)
  (run 'hg heads' to see heads, 'hg merge' to merge)
  $ hgph
  4 0 a-D - b555f63b6063
  3 0 a-C - 54acac6f23ab
  2 1 b-A - f54f1bb90ff3
  1 0 a-B - 548a3d25dbf0
  0 0 a-A - 054250a37db4

pull did not updated ../alpha state.
push from alpha to beta should update phase even if nothing is transfered

  $ cd ../alpha
  $ hgph # not updated by remote pull
  3 1 a-D - b555f63b6063
  2 1 a-C - 54acac6f23ab
  1 0 a-B - 548a3d25dbf0
  0 0 a-A - 054250a37db4
  $ hg push ../beta
  pushing to ../beta
  searching for changes
  no changes found
  $ hgph
  3 0 a-D - b555f63b6063
  2 0 a-C - 54acac6f23ab
  1 0 a-B - 548a3d25dbf0
  0 0 a-A - 054250a37db4

update must update phase of common changeset too

  $ hg pull ../beta # getting b-A
  pulling from ../beta
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  (run 'hg heads' to see heads, 'hg merge' to merge)

  $ cd ../beta
  $ hgph # not updated by remote pull
  4 0 a-D - b555f63b6063
  3 0 a-C - 54acac6f23ab
  2 1 b-A - f54f1bb90ff3
  1 0 a-B - 548a3d25dbf0
  0 0 a-A - 054250a37db4
  $ hg pull ../alpha
  pulling from ../alpha
  searching for changes
  no changes found
  $ hgph
  4 0 a-D - b555f63b6063
  3 0 a-C - 54acac6f23ab
  2 0 b-A - f54f1bb90ff3
  1 0 a-B - 548a3d25dbf0
  0 0 a-A - 054250a37db4

Publish configuration option
----------------------------

Pull
````

changegroup are added without phase movement

  $ hg bundle -a ../base.bundle
  5 changesets found
  $ cd ..
  $ hg init mu
  $ cd mu
  $ cat > .hg/hgrc << EOF
  > [phases]
  > publish=0
  > EOF
  $ hg unbundle ../base.bundle
  adding changesets
  adding manifests
  adding file changes
  added 5 changesets with 5 changes to 5 files (+1 heads)
  (run 'hg heads' to see heads, 'hg merge' to merge)
  $ hgph
  4 1 a-D - b555f63b6063
  3 1 a-C - 54acac6f23ab
  2 1 b-A - f54f1bb90ff3
  1 1 a-B - 548a3d25dbf0
  0 1 a-A - 054250a37db4
  $ cd ..

Pulling from publish=False to publish=False does not move boundary.

  $ hg init nu
  $ cd nu
  $ cat > .hg/hgrc << EOF
  > [phases]
  > publish=0
  > EOF
  $ hg pull ../mu -r 54acac6f23ab
  pulling from ../mu
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 3 changes to 3 files
  (run 'hg update' to get a working copy)
  $ hgph
  2 1 a-C - 54acac6f23ab
  1 1 a-B - 548a3d25dbf0
  0 1 a-A - 054250a37db4

Even for common

  $ hg pull ../mu -r f54f1bb90ff3
  pulling from ../mu
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  (run 'hg heads' to see heads, 'hg merge' to merge)
  $ hgph
  3 1 b-A - f54f1bb90ff3
  2 1 a-C - 54acac6f23ab
  1 1 a-B - 548a3d25dbf0
  0 1 a-A - 054250a37db4


Pulling from Publish=True to Publish=False move boundary in common set.
we are in nu

  $ hg pull ../alpha -r b555f63b6063
  pulling from ../alpha
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  (run 'hg update' to get a working copy)
  $ hgph
  4 0 a-D - b555f63b6063
  3 0 b-A - f54f1bb90ff3
  2 0 a-C - 54acac6f23ab
  1 0 a-B - 548a3d25dbf0
  0 0 a-A - 054250a37db4

pulling from Publish=False to publish=False with some public

  $ hg up -q f54f1bb90ff3
  $ mkcommit n-A
  $ mkcommit n-B
  $ hgph
  6 1 n-B - 145e75495359
  5 1 n-A - d6bcb4f74035
  4 0 a-D - b555f63b6063
  3 0 b-A - f54f1bb90ff3
  2 0 a-C - 54acac6f23ab
  1 0 a-B - 548a3d25dbf0
  0 0 a-A - 054250a37db4
  $ cd ../mu
  $ hg pull ../nu
  pulling from ../nu
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  (run 'hg update' to get a working copy)
  $ hgph
  6 1 n-B - 145e75495359
  5 1 n-A - d6bcb4f74035
  4 0 a-D - b555f63b6063
  3 0 a-C - 54acac6f23ab
  2 0 b-A - f54f1bb90ff3
  1 0 a-B - 548a3d25dbf0
  0 0 a-A - 054250a37db4
  $ cd ..

pulling into publish=True

  $ cd alpha
  $ hgph
  4 0 b-A - f54f1bb90ff3
  3 0 a-D - b555f63b6063
  2 0 a-C - 54acac6f23ab
  1 0 a-B - 548a3d25dbf0
  0 0 a-A - 054250a37db4
  $ hg pull ../mu
  pulling from ../mu
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  (run 'hg update' to get a working copy)
  $ hgph
  6 1 n-B - 145e75495359
  5 1 n-A - d6bcb4f74035
  4 0 b-A - f54f1bb90ff3
  3 0 a-D - b555f63b6063
  2 0 a-C - 54acac6f23ab
  1 0 a-B - 548a3d25dbf0
  0 0 a-A - 054250a37db4
  $ cd ..

pulling back into original repo

  $ cd nu
  $ hg pull ../alpha
  pulling from ../alpha
  searching for changes
  no changes found
  $ hgph
  6 0 n-B - 145e75495359
  5 0 n-A - d6bcb4f74035
  4 0 a-D - b555f63b6063
  3 0 b-A - f54f1bb90ff3
  2 0 a-C - 54acac6f23ab
  1 0 a-B - 548a3d25dbf0
  0 0 a-A - 054250a37db4

Push
````

(inserted)

Test that phase are pushed even when they are nothing to pus
(this might be tested later bu are very convenient to not alter too much test)

Push back to alpha

  $ hg push ../alpha # from nu
  pushing to ../alpha
  searching for changes
  no changes found
  $ cd ..
  $ cd alpha
  $ hgph
  6 0 n-B - 145e75495359
  5 0 n-A - d6bcb4f74035
  4 0 b-A - f54f1bb90ff3
  3 0 a-D - b555f63b6063
  2 0 a-C - 54acac6f23ab
  1 0 a-B - 548a3d25dbf0
  0 0 a-A - 054250a37db4

(end insertion)


initial setup

  $ hg glog # of alpha
  o  changeset:   6:145e75495359
  |  tag:         tip
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     n-B
  |
  o  changeset:   5:d6bcb4f74035
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     n-A
  |
  o  changeset:   4:f54f1bb90ff3
  |  parent:      1:548a3d25dbf0
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     b-A
  |
  | @  changeset:   3:b555f63b6063
  | |  user:        test
  | |  date:        Thu Jan 01 00:00:00 1970 +0000
  | |  summary:     a-D
  | |
  | o  changeset:   2:54acac6f23ab
  |/   user:        test
  |    date:        Thu Jan 01 00:00:00 1970 +0000
  |    summary:     a-C
  |
  o  changeset:   1:548a3d25dbf0
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     a-B
  |
  o  changeset:   0:054250a37db4
     user:        test
     date:        Thu Jan 01 00:00:00 1970 +0000
     summary:     a-A
  
  $ mkcommit a-E
  $ mkcommit a-F
  $ mkcommit a-G
  $ hg up d6bcb4f74035 -q
  $ mkcommit a-H
  created new head
  $ hgph
  10 1 a-H - 967b449fbc94
  9 1 a-G - 3e27b6f1eee1
  8 1 a-F - b740e3e5c05d
  7 1 a-E - e9f537e46dea
  6 0 n-B - 145e75495359
  5 0 n-A - d6bcb4f74035
  4 0 b-A - f54f1bb90ff3
  3 0 a-D - b555f63b6063
  2 0 a-C - 54acac6f23ab
  1 0 a-B - 548a3d25dbf0
  0 0 a-A - 054250a37db4

Pushing to Publish=False (unknown changeset)

  $ hg push ../mu -r b740e3e5c05d # a-F
  pushing to ../mu
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  $ hgph
  10 1 a-H - 967b449fbc94
  9 1 a-G - 3e27b6f1eee1
  8 1 a-F - b740e3e5c05d
  7 1 a-E - e9f537e46dea
  6 0 n-B - 145e75495359
  5 0 n-A - d6bcb4f74035
  4 0 b-A - f54f1bb90ff3
  3 0 a-D - b555f63b6063
  2 0 a-C - 54acac6f23ab
  1 0 a-B - 548a3d25dbf0
  0 0 a-A - 054250a37db4

  $ cd ../mu
  $ hgph # d6bcb4f74035 and 145e75495359 changed because common is too smart
  8 1 a-F - b740e3e5c05d
  7 1 a-E - e9f537e46dea
  6 0 n-B - 145e75495359
  5 0 n-A - d6bcb4f74035
  4 0 a-D - b555f63b6063
  3 0 a-C - 54acac6f23ab
  2 0 b-A - f54f1bb90ff3
  1 0 a-B - 548a3d25dbf0
  0 0 a-A - 054250a37db4

Pushing to Publish=True (unknown changeset)

  $ hg push ../beta -r b740e3e5c05d
  pushing to ../beta
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  $ hgph # again d6bcb4f74035 and 145e75495359 changed because common is too smart
  8 0 a-F - b740e3e5c05d
  7 0 a-E - e9f537e46dea
  6 0 n-B - 145e75495359
  5 0 n-A - d6bcb4f74035
  4 0 a-D - b555f63b6063
  3 0 a-C - 54acac6f23ab
  2 0 b-A - f54f1bb90ff3
  1 0 a-B - 548a3d25dbf0
  0 0 a-A - 054250a37db4

Pushing to Publish=True (common changeset)

  $ cd ../beta
  $ hg push ../alpha
  pushing to ../alpha
  searching for changes
  no changes found
  $ hgph
  6 0 a-F - b740e3e5c05d
  5 0 a-E - e9f537e46dea
  4 0 a-D - b555f63b6063
  3 0 a-C - 54acac6f23ab
  2 0 b-A - f54f1bb90ff3
  1 0 a-B - 548a3d25dbf0
  0 0 a-A - 054250a37db4
  $ cd ../alpha
  $ hgph # e9f537e46dea and b740e3e5c05d should have been sync to 0
  10 1 a-H - 967b449fbc94
  9 1 a-G - 3e27b6f1eee1
  8 0 a-F - b740e3e5c05d
  7 0 a-E - e9f537e46dea
  6 0 n-B - 145e75495359
  5 0 n-A - d6bcb4f74035
  4 0 b-A - f54f1bb90ff3
  3 0 a-D - b555f63b6063
  2 0 a-C - 54acac6f23ab
  1 0 a-B - 548a3d25dbf0
  0 0 a-A - 054250a37db4

Pushing to Publish=False (common changeset that change phase + unknown one)

  $ hg push ../mu -r 967b449fbc94 -f
  pushing to ../mu
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  $ hgph
  10 1 a-H - 967b449fbc94
  9 1 a-G - 3e27b6f1eee1
  8 0 a-F - b740e3e5c05d
  7 0 a-E - e9f537e46dea
  6 0 n-B - 145e75495359
  5 0 n-A - d6bcb4f74035
  4 0 b-A - f54f1bb90ff3
  3 0 a-D - b555f63b6063
  2 0 a-C - 54acac6f23ab
  1 0 a-B - 548a3d25dbf0
  0 0 a-A - 054250a37db4
  $ cd ../mu
  $ hgph # d6bcb4f74035 should have changed phase
  >      # again d6bcb4f74035 and 145e75495359 changed because common was too smart
  9 1 a-H - 967b449fbc94
  8 0 a-F - b740e3e5c05d
  7 0 a-E - e9f537e46dea
  6 0 n-B - 145e75495359
  5 0 n-A - d6bcb4f74035
  4 0 a-D - b555f63b6063
  3 0 a-C - 54acac6f23ab
  2 0 b-A - f54f1bb90ff3
  1 0 a-B - 548a3d25dbf0
  0 0 a-A - 054250a37db4


Pushing to Publish=True (common changeset from publish=False)

  $ hg push ../alpha
  pushing to ../alpha
  searching for changes
  no changes found
  $ hgph
  9 0 a-H - 967b449fbc94
  8 0 a-F - b740e3e5c05d
  7 0 a-E - e9f537e46dea
  6 0 n-B - 145e75495359
  5 0 n-A - d6bcb4f74035
  4 0 a-D - b555f63b6063
  3 0 a-C - 54acac6f23ab
  2 0 b-A - f54f1bb90ff3
  1 0 a-B - 548a3d25dbf0
  0 0 a-A - 054250a37db4
  $ hgph -R ../alpha # a-H should have been synced to 0
  10 0 a-H - 967b449fbc94
  9 1 a-G - 3e27b6f1eee1
  8 0 a-F - b740e3e5c05d
  7 0 a-E - e9f537e46dea
  6 0 n-B - 145e75495359
  5 0 n-A - d6bcb4f74035
  4 0 b-A - f54f1bb90ff3
  3 0 a-D - b555f63b6063
  2 0 a-C - 54acac6f23ab
  1 0 a-B - 548a3d25dbf0
  0 0 a-A - 054250a37db4