tests/test-check-interfaces.py

rebase: add boolean config item rebase.store-source

This allows to use rebase without recording a rebase_source extra
field. This is useful for example to build a mirror converted from
another SCM (such as svn) by converting only new revisions, and
then incrementally add them to the destination by pulling from the
newly converted (unrelated) repo and rebasing the new revisions
onto the last old already stored changeset. Without this patch the
rebased changesets would always receive some rebase_source that
would depend on the particular history of the conversion process,
instead of only depending on the original source revisions.

This is used to implement a hg mirror repo of SvarDOS (a partially
nonfree but completely redistributable DOS distribution) in the
scripts at https://hg.pushbx.org/ecm/svardos.scr/

In particular, cre.sh creates an svn mirror, upd.sh recreates an
entire hg repo from the svn mirror (which takes too long to do in a
regular job), and akt.sh uses hg convert with the config item
convert.svn.startrev to incrementally convert only the two most
recent revisions already found in the mirror destination plus any
possible new revisions. If any are found, the temporary repo's
changesets are pulled into the destination (as changesets from an
unrelated repository). Then the changesets corresponding to the new
revisions are rebased onto the prior final changeset. (Finally, the
two remaining duplicates of the prior head and its parent are
stripped from the destination repository.)

Without this patch, the particular rebase_source extra field would
depend on the order and times at which akt.sh was used, instead of
only depending on the source repository. In other words, whatever
sequence of upd.sh and akt.sh is used at whatever times, it is
desired that the final output repositories always match each other
exactly.

# Test that certain objects conform to well-defined interfaces.


from mercurial import encoding

encoding.environ[b'HGREALINTERFACES'] = b'1'

import os
import subprocess
import sys

# Only run if tests are run in a repo
if subprocess.call(
    [sys.executable, '%s/hghave' % os.environ['TESTDIR'], 'test-repo']
):
    sys.exit(80)

from mercurial.interfaces import (
    dirstate as intdirstate,
    repository,
)
from mercurial.thirdparty.zope import interface as zi
from mercurial.thirdparty.zope.interface import verify as ziverify
from mercurial import (
    bundlerepo,
    dirstate,
    filelog,
    httppeer,
    localrepo,
    manifest,
    pycompat,
    revlog,
    sshpeer,
    statichttprepo,
    ui as uimod,
    unionrepo,
    vfs as vfsmod,
    wireprotoserver,
    wireprototypes,
    wireprotov1peer,
)

testdir = os.path.dirname(__file__)
rootdir = pycompat.fsencode(os.path.normpath(os.path.join(testdir, '..')))

sys.path[0:0] = [testdir]
import simplestorerepo

del sys.path[0]


def checkzobject(o, allowextra=False):
    """Verify an object with a zope interface."""
    ifaces = zi.providedBy(o)
    if not ifaces:
        print('%r does not provide any zope interfaces' % o)
        return

    # Run zope.interface's built-in verification routine. This verifies that
    # everything that is supposed to be present is present.
    for iface in ifaces:
        ziverify.verifyObject(iface, o)

    if allowextra:
        return

    # Now verify that the object provides no extra public attributes that
    # aren't declared as part of interfaces.
    allowed = set()
    for iface in ifaces:
        allowed |= set(iface.names(all=True))

    public = {a for a in dir(o) if not a.startswith('_')}

    for attr in sorted(public - allowed):
        print(
            'public attribute not declared in interfaces: %s.%s'
            % (o.__class__.__name__, attr)
        )


# Facilitates testing localpeer.
class dummyrepo:
    def __init__(self):
        self.ui = uimod.ui()
        self._wanted_sidedata = set()

    def filtered(self, name):
        pass

    def _restrictcapabilities(self, caps):
        pass


class dummyopener:
    handlers = []


# Facilitates testing sshpeer without requiring a server.
class badpeer(httppeer.httppeer):
    def __init__(self):
        super(badpeer, self).__init__(
            None, None, None, dummyopener(), None, None
        )
        self.badattribute = True

    def badmethod(self):
        pass


class dummypipe:
    def close(self):
        pass

    @property
    def closed(self):
        pass


def main():
    ui = uimod.ui()
    # Needed so we can open a local repo with obsstore without a warning.
    ui.setconfig(b'experimental', b'evolution.createmarkers', True)

    checkzobject(badpeer())

    ziverify.verifyClass(repository.ipeerbase, httppeer.httppeer)
    checkzobject(httppeer.httppeer(None, None, None, dummyopener(), None, None))

    ziverify.verifyClass(repository.ipeerbase, localrepo.localpeer)
    checkzobject(localrepo.localpeer(dummyrepo()))

    ziverify.verifyClass(
        repository.ipeercommandexecutor, localrepo.localcommandexecutor
    )
    checkzobject(localrepo.localcommandexecutor(None))

    ziverify.verifyClass(
        repository.ipeercommandexecutor, wireprotov1peer.peerexecutor
    )
    checkzobject(wireprotov1peer.peerexecutor(None))

    ziverify.verifyClass(repository.ipeerbase, sshpeer.sshv1peer)
    checkzobject(
        sshpeer.sshv1peer(
            ui,
            b'ssh://localhost/foo',
            b'',
            dummypipe(),
            dummypipe(),
            None,
            None,
        )
    )

    ziverify.verifyClass(repository.ipeerbase, bundlerepo.bundlepeer)
    checkzobject(bundlerepo.bundlepeer(dummyrepo()))

    ziverify.verifyClass(repository.ipeerbase, statichttprepo.statichttppeer)
    checkzobject(statichttprepo.statichttppeer(dummyrepo()))

    ziverify.verifyClass(repository.ipeerbase, unionrepo.unionpeer)
    checkzobject(unionrepo.unionpeer(dummyrepo()))

    ziverify.verifyClass(
        repository.ilocalrepositorymain, localrepo.localrepository
    )
    ziverify.verifyClass(
        repository.ilocalrepositoryfilestorage, localrepo.revlogfilestorage
    )
    repo = localrepo.makelocalrepository(ui, rootdir)
    checkzobject(repo)

    ziverify.verifyClass(
        wireprototypes.baseprotocolhandler, wireprotoserver.sshv1protocolhandler
    )
    ziverify.verifyClass(
        wireprototypes.baseprotocolhandler,
        wireprotoserver.httpv1protocolhandler,
    )

    sshv1 = wireprotoserver.sshv1protocolhandler(None, None, None)
    checkzobject(sshv1)

    httpv1 = wireprotoserver.httpv1protocolhandler(None, None, None)
    checkzobject(httpv1)

    ziverify.verifyClass(repository.ifilestorage, filelog.filelog)
    ziverify.verifyClass(repository.imanifestdict, manifest.manifestdict)
    ziverify.verifyClass(repository.imanifestdict, manifest.treemanifest)
    ziverify.verifyClass(
        repository.imanifestrevisionstored, manifest.manifestctx
    )
    ziverify.verifyClass(
        repository.imanifestrevisionwritable, manifest.memmanifestctx
    )
    ziverify.verifyClass(
        repository.imanifestrevisionstored, manifest.treemanifestctx
    )
    ziverify.verifyClass(
        repository.imanifestrevisionwritable, manifest.memtreemanifestctx
    )
    ziverify.verifyClass(repository.imanifestlog, manifest.manifestlog)
    ziverify.verifyClass(repository.imanifeststorage, manifest.manifestrevlog)

    ziverify.verifyClass(
        repository.irevisiondelta, simplestorerepo.simplestorerevisiondelta
    )
    ziverify.verifyClass(repository.ifilestorage, simplestorerepo.filestorage)
    ziverify.verifyClass(
        repository.iverifyproblem, simplestorerepo.simplefilestoreproblem
    )

    ziverify.verifyClass(intdirstate.idirstate, dirstate.dirstate)

    vfs = vfsmod.vfs(b'.')
    fl = filelog.filelog(vfs, b'dummy.i')
    checkzobject(fl, allowextra=True)

    # Conforms to imanifestlog.
    ml = manifest.manifestlog(
        vfs,
        repo,
        manifest.manifestrevlog(repo.nodeconstants, repo.svfs),
        repo.narrowmatch(),
    )
    checkzobject(ml)
    checkzobject(repo.manifestlog)

    # Conforms to imanifestrevision.
    mctx = ml[repo[0].manifestnode()]
    checkzobject(mctx)

    # Conforms to imanifestrevisionwritable.
    checkzobject(mctx.copy())

    # Conforms to imanifestdict.
    checkzobject(mctx.read())

    mrl = manifest.manifestrevlog(repo.nodeconstants, vfs)
    checkzobject(mrl)

    ziverify.verifyClass(repository.irevisiondelta, revlog.revlogrevisiondelta)

    rd = revlog.revlogrevisiondelta(
        node=b'',
        p1node=b'',
        p2node=b'',
        basenode=b'',
        linknode=b'',
        flags=b'',
        baserevisionsize=None,
        revision=b'',
        sidedata=b'',
        delta=None,
        protocol_flags=b'',
    )
    checkzobject(rd)

    ziverify.verifyClass(repository.iverifyproblem, revlog.revlogproblem)
    checkzobject(revlog.revlogproblem())


main()