tests/test-narrow-widen-no-ellipsis.t

changegroup: move message about added changes to transaction summary

Before that, applying multiple changegroups in the same transaction issued the
message multiple time. This result in a confusing output:

    adding changesets
    adding manifests
    adding file changes
    added 32768 changesets with 60829 changes to 2668 files
    adding changesets
    adding manifests
    adding file changes
    added 8192 changesets with 16885 changes to 1553 files
    adding changesets
    adding manifests
    adding file changes
    added 1020 changesets with 1799 changes to 536 files
    adding changesets
    adding manifests
    ...

Instead, we now only issue the message once at the end of the transaction,
summing up all added changesets, changes and files. The line is identical, but
happens sightly later in the output.

There are other suboptimal behavior around issue multiple changegroup (eg:
progress bar). We'll cover them later.

This impact of lot of test as one would expect, but a two pass check show they
are just the order change we expected.

To deal with "under the hood" bundle application by internal code, we had to
take a slightly hacky move. We could clean that up with a more official way to
enter "under the hood" section, however I want to keep this series simple to get
it landed. This kind of change have a very high bit rot rate since it impact a
lot of test output.

#testcases tree flat
  $ . "$TESTDIR/narrow-library.sh"

#if tree
  $ cat << EOF >> $HGRCPATH
  > [experimental]
  > treemanifest = 1
  > EOF
#endif

  $ hg init master
  $ cd master

  $ mkdir inside
  $ echo 'inside' > inside/f
  $ hg add inside/f
  $ hg commit -m 'add inside'

  $ mkdir widest
  $ echo 'widest' > widest/f
  $ hg add widest/f
  $ hg commit -m 'add widest'

  $ mkdir outside
  $ echo 'outside' > outside/f
  $ hg add outside/f
  $ hg commit -m 'add outside'

  $ cd ..

narrow clone the inside file

  $ hg clone --narrow ssh://user@dummy/master narrow
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 0 changes to 0 files
  new changesets *:* (glob)
  updating to branch default
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd narrow
  $ hg tracked
  $ hg files
  [1]

widen from an empty clone

  $ hg tracked --addinclude inside
  comparing with ssh://user@dummy/master
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 0 changesets with 1 changes to 1 files
  $ hg tracked
  I path:inside
  $ ls
  inside
  $ cat inside/f
  inside
  $ cd ..

add more upstream files which we will include in a wider narrow spec

  $ cd master

  $ mkdir wider
  $ echo 'wider' > wider/f
  $ hg add wider/f
  $ echo 'widest v2' > widest/f
  $ hg commit -m 'add wider, update widest'

  $ echo 'widest v3' > widest/f
  $ hg commit -m 'update widest v3'

  $ echo 'inside v2' > inside/f
  $ hg commit -m 'update inside'

  $ mkdir outside2
  $ echo 'outside2' > outside2/f
  $ hg add outside2/f
  $ hg commit -m 'add outside2'

  $ echo 'widest v4' > widest/f
  $ hg commit -m 'update widest v4'

  $ hg log -T "{if(ellipsis, '...')}{rev}: {desc}\n"
  7: update widest v4
  6: add outside2
  5: update inside
  4: update widest v3
  3: add wider, update widest
  2: add outside
  1: add widest
  0: add inside

  $ cd ..

Widen the narrow spec to see the widest file. This should not get the newly
added upstream revisions.

  $ cd narrow
  $ hg id -n
  2

  $ hg tracked --addinclude widest/f --debug
  comparing with ssh://user@dummy/master
  running python "*dummyssh" *user@dummy* *hg -R master serve --stdio* (glob)
  sending hello command
  sending between command
  remote: * (glob)
  remote: capabilities: * (glob)
  remote: 1
  sending protocaps command
  query 1; heads
  sending batch command
  searching for changes
  all local changesets known remotely
  sending narrow_widen command
  bundle2-input-bundle: with-transaction
  bundle2-input-part: "changegroup" (params: * mandatory) supported (glob)
  adding changesets
  adding manifests
  adding widest/ revisions (tree !)
  adding file changes
  adding widest/f revisions
  bundle2-input-part: total payload size * (glob)
  bundle2-input-bundle: 0 parts total
  added 0 changesets with 1 changes to 1 files
   widest/f: narrowspec updated -> g
  getting widest/f
  $ hg tracked
  I path:inside
  I path:widest/f

  $ cat widest/f
  widest

  $ hg id -n
  2

Test that extending already included files should not call narrow_widen
wireprotocol command

  $ hg tracked --addinclude widest/f
  nothing to widen or narrow

Pull down the newly added upstream revision.

  $ hg pull
  pulling from ssh://user@dummy/master
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 5 changesets with 4 changes to 2 files
  new changesets *:* (glob)
  (run 'hg update' to get a working copy)
  $ hg update -r 'desc("add wider")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ cat widest/f
  widest v2

  $ hg update -r 'desc("update inside")'
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cat widest/f
  widest v3
  $ cat inside/f
  inside v2

  $ hg log -T "{if(ellipsis, '...')}{rev}: {desc}\n"
  7: update widest v4
  6: add outside2
  5: update inside
  4: update widest v3
  3: add wider, update widest
  2: add outside
  1: add widest
  0: add inside

Check that widening with a newline fails

  $ hg tracked --addinclude 'widest
  > '
  abort: newlines are not allowed in narrowspec paths
  [255]

widen the narrow spec to include the wider file

  $ hg tracked --addinclude wider
  comparing with ssh://user@dummy/master
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 0 changesets with 1 changes to 1 files
  $ hg tracked
  I path:inside
  I path:wider
  I path:widest/f
  $ hg update 'desc("add widest")'
  2 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ cat widest/f
  widest
  $ hg update 'desc("add wider, update widest")'
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cat wider/f
  wider
  $ cat widest/f
  widest v2
  $ hg update 'desc("update widest v3")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cat widest/f
  widest v3
  $ hg update 'desc("update widest v4")'
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cat widest/f
  widest v4

  $ hg log -T "{if(ellipsis, '...')}{rev}: {desc}\n"
  7: update widest v4
  6: add outside2
  5: update inside
  4: update widest v3
  3: add wider, update widest
  2: add outside
  1: add widest
  0: add inside

separate suite of tests: files from 0-10 modified in changes 0-10. This allows
more obvious precise tests tickling particular corner cases.

  $ cd ..
  $ hg init upstream
  $ cd upstream
  $ for x in `$TESTDIR/seq.py 0 10`
  > do
  >   mkdir d$x
  >   echo $x > d$x/f
  >   hg add d$x/f
  >   hg commit -m "add d$x/f"
  > done
  $ hg log -T "{rev}: {desc}\n"
  10: add d10/f
  9: add d9/f
  8: add d8/f
  7: add d7/f
  6: add d6/f
  5: add d5/f
  4: add d4/f
  3: add d3/f
  2: add d2/f
  1: add d1/f
  0: add d0/f

make narrow clone with every third node.

  $ cd ..
  $ hg clone --narrow ssh://user@dummy/upstream narrow2 --include d0 --include d3 --include d6 --include d9
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 11 changesets with 4 changes to 4 files
  new changesets *:* (glob)
  updating to branch default
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd narrow2
  $ hg tracked
  I path:d0
  I path:d3
  I path:d6
  I path:d9
  $ hg verify
  checking changesets
  checking manifests
  checking directory manifests (tree !)
  crosschecking files in changesets and manifests
  checking files
  checked 11 changesets with 4 changes to 4 files
  $ hg log -T "{if(ellipsis, '...')}{rev}: {desc}\n"
  10: add d10/f
  9: add d9/f
  8: add d8/f
  7: add d7/f
  6: add d6/f
  5: add d5/f
  4: add d4/f
  3: add d3/f
  2: add d2/f
  1: add d1/f
  0: add d0/f
  $ hg tracked --addinclude d1
  comparing with ssh://user@dummy/upstream
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 0 changesets with 1 changes to 1 files
  $ hg tracked
  I path:d0
  I path:d1
  I path:d3
  I path:d6
  I path:d9
  $ hg log -T "{if(ellipsis, '...')}{rev}: {desc}\n"
  10: add d10/f
  9: add d9/f
  8: add d8/f
  7: add d7/f
  6: add d6/f
  5: add d5/f
  4: add d4/f
  3: add d3/f
  2: add d2/f
  1: add d1/f
  0: add d0/f

Verify shouldn't claim the repo is corrupt after a widen.

  $ hg verify
  checking changesets
  checking manifests
  checking directory manifests (tree !)
  crosschecking files in changesets and manifests
  checking files
  checked 11 changesets with 5 changes to 5 files

Widening preserves parent of local commit

  $ cd ..
  $ hg clone -q --narrow ssh://user@dummy/upstream narrow3 --include d2 -r 2
  $ cd narrow3
  $ hg log -T "{if(ellipsis, '...')}{rev}: {desc}\n"
  2: add d2/f
  1: add d1/f
  0: add d0/f
  $ hg pull -q -r 3
  $ hg co -q tip
  $ hg pull -q -r 4
  $ echo local > d2/f
  $ hg ci -m local
  created new head
  $ hg tracked -q --addinclude d0 --addinclude d9

Widening preserves bookmarks

  $ cd ..
  $ hg clone -q --narrow ssh://user@dummy/upstream narrow-bookmarks --include d4
  $ cd narrow-bookmarks
  $ echo local > d4/f
  $ hg ci -m local
  $ hg bookmarks bookmark
  $ hg bookmarks
   * bookmark                  11:* (glob)
  $ hg -q tracked --addinclude d2
  $ hg bookmarks
   * bookmark                  11:* (glob)
  $ hg log -r bookmark -T '{desc}\n'
  local

Widening that fails can be recovered from

  $ cd ..
  $ hg clone -q --narrow ssh://user@dummy/upstream interrupted --include d0
  $ cd interrupted
  $ echo local > d0/f
  $ hg ci -m local
  $ hg log -T "{if(ellipsis, '...')}{rev}: {desc}\n"
  11: local
  10: add d10/f
  9: add d9/f
  8: add d8/f
  7: add d7/f
  6: add d6/f
  5: add d5/f
  4: add d4/f
  3: add d3/f
  2: add d2/f
  1: add d1/f
  0: add d0/f
  $ hg bookmarks bookmark
  $ hg --config hooks.pretxnchangegroup.bad=false tracked --addinclude d1
  comparing with ssh://user@dummy/upstream
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 0 changesets with 1 changes to 1 files
  $ hg log -T "{if(ellipsis, '...')}{rev}: {desc}\n"
  11: local
  10: add d10/f
  9: add d9/f
  8: add d8/f
  7: add d7/f
  6: add d6/f
  5: add d5/f
  4: add d4/f
  3: add d3/f
  2: add d2/f
  1: add d1/f
  0: add d0/f
  $ hg bookmarks
   * bookmark                  11:* (glob)
  $ hg unbundle .hg/strip-backup/*-widen.hg
  abort: .hg/strip-backup/*-widen.hg: $ENOTDIR$ (windows !)
  abort: $ENOENT$: '.hg/strip-backup/*-widen.hg' (no-windows !)
  [255]
  $ hg log -T "{if(ellipsis, '...')}{rev}: {desc}\n"
  11: local
  10: add d10/f
  9: add d9/f
  8: add d8/f
  7: add d7/f
  6: add d6/f
  5: add d5/f
  4: add d4/f
  3: add d3/f
  2: add d2/f
  1: add d1/f
  0: add d0/f
  $ hg bookmarks
   * bookmark                  11:* (glob)