tests/test-subrepo-recursion.t

changelog: never inline changelog

The test suite mostly use small repositories, that implies that most changelog in the
tests are inlined. As a result, non-inlined changelog are quite poorly tested.
Since non-inline changelog are most common case for serious repositories, this
lack of testing is a significant problem that results in high profile issue like
the one recently fixed by 66417f55ea33 and 849745d7da89.

Inlining the changelog does not bring much to the table, the number of total
file saved is negligible, and the changelog will be read by most operation
anyway.

So this changeset is make it so we never inline the changelog, and de-inline the
one that are still inlined whenever we touch them.

By doing that, we remove the "dual code path" situation for writing new entry to
the changelog and move to a "single code path" situation. Having a single
code path simplify the code and make sure it is covered by test (if test cover
that situation obviously)


This impact all tests that care about the number of file and the exchange size,
but there is nothing too complicated in them just a lot of churn.

The churn is made "worse" by the fact rust will use the persistent nodemap on
any changelog now. Which is overall a win as it means testing the persistent
nodemap more and having less special cases.

In short, having inline changelog is mostly useless and an endless source of
pain. We get rid of it.

Create test repository:

  $ hg init repo
  $ cd repo
  $ echo x1 > x.txt

  $ hg init foo
  $ cd foo
  $ echo y1 > y.txt

  $ hg init bar
  $ cd bar
  $ echo z1 > z.txt

  $ cd ..
  $ echo 'bar = bar' > .hgsub

  $ cd ..
  $ echo 'foo = foo' > .hgsub

Add files --- .hgsub files must go first to trigger subrepos:

  $ hg add -S .hgsub
  $ hg add -S foo/.hgsub
  $ hg add -S foo/bar
  adding foo/bar/z.txt
  $ hg add -S
  adding x.txt
  adding foo/y.txt

Test recursive status without committing anything:

  $ hg status -S
  A .hgsub
  A foo/.hgsub
  A foo/bar/z.txt
  A foo/y.txt
  A x.txt

Test recursive diff without committing anything:

  $ hg diff --nodates -S foo
  diff -r 000000000000 foo/.hgsub
  --- /dev/null
  +++ b/foo/.hgsub
  @@ -0,0 +1,1 @@
  +bar = bar
  diff -r 000000000000 foo/y.txt
  --- /dev/null
  +++ b/foo/y.txt
  @@ -0,0 +1,1 @@
  +y1
  diff -r 000000000000 foo/bar/z.txt
  --- /dev/null
  +++ b/foo/bar/z.txt
  @@ -0,0 +1,1 @@
  +z1

Commits:

  $ hg commit -m fails
  abort: uncommitted changes in subrepository "foo"
  (use --subrepos for recursive commit)
  [255]

The --subrepos flag overwrite the config setting:

  $ hg commit -m 0-0-0 --config ui.commitsubrepos=No --subrepos
  committing subrepository foo
  committing subrepository foo/bar

  $ cd foo
  $ echo y2 >> y.txt
  $ hg commit -m 0-1-0

  $ cd bar
  $ echo z2 >> z.txt
  $ hg commit -m 0-1-1

  $ cd ..
  $ hg commit -m 0-2-1

  $ cd ..
  $ hg commit -m 1-2-1

Change working directory:

  $ echo y3 >> foo/y.txt
  $ echo z3 >> foo/bar/z.txt
  $ hg status -S
  M foo/bar/z.txt
  M foo/y.txt
  $ hg diff --nodates -S
  diff -r d254738c5f5e foo/y.txt
  --- a/foo/y.txt
  +++ b/foo/y.txt
  @@ -1,2 +1,3 @@
   y1
   y2
  +y3
  diff -r 9647f22de499 foo/bar/z.txt
  --- a/foo/bar/z.txt
  +++ b/foo/bar/z.txt
  @@ -1,2 +1,3 @@
   z1
   z2
  +z3

Status call crossing repository boundaries:

  $ hg status -S foo/bar/z.txt
  M foo/bar/z.txt
  $ hg status -S -I 'foo/?.txt'
  M foo/y.txt
  $ hg status -S -I '**/?.txt'
  M foo/bar/z.txt
  M foo/y.txt
  $ hg diff --nodates -S -I '**/?.txt'
  diff -r d254738c5f5e foo/y.txt
  --- a/foo/y.txt
  +++ b/foo/y.txt
  @@ -1,2 +1,3 @@
   y1
   y2
  +y3
  diff -r 9647f22de499 foo/bar/z.txt
  --- a/foo/bar/z.txt
  +++ b/foo/bar/z.txt
  @@ -1,2 +1,3 @@
   z1
   z2
  +z3

Status from within a subdirectory:

  $ mkdir dir
  $ cd dir
  $ echo a1 > a.txt
  $ hg status -S
  M foo/bar/z.txt
  M foo/y.txt
  ? dir/a.txt
  $ hg diff --nodates -S
  diff -r d254738c5f5e foo/y.txt
  --- a/foo/y.txt
  +++ b/foo/y.txt
  @@ -1,2 +1,3 @@
   y1
   y2
  +y3
  diff -r 9647f22de499 foo/bar/z.txt
  --- a/foo/bar/z.txt
  +++ b/foo/bar/z.txt
  @@ -1,2 +1,3 @@
   z1
   z2
  +z3

Status with relative path:

  $ hg status -S ..
  M ../foo/bar/z.txt
  M ../foo/y.txt
  ? a.txt

XXX: filtering lfilesrepo.status() in 3.3-rc causes these files to be listed as
added instead of modified.
  $ hg status -S .. --config extensions.largefiles=
  M ../foo/bar/z.txt
  M ../foo/y.txt
  ? a.txt

  $ hg diff --nodates -S ..
  diff -r d254738c5f5e foo/y.txt
  --- a/foo/y.txt
  +++ b/foo/y.txt
  @@ -1,2 +1,3 @@
   y1
   y2
  +y3
  diff -r 9647f22de499 foo/bar/z.txt
  --- a/foo/bar/z.txt
  +++ b/foo/bar/z.txt
  @@ -1,2 +1,3 @@
   z1
   z2
  +z3
  $ cd ..

Cleanup and final commit:

  $ rm -r dir
  $ hg commit --subrepos -m 2-3-2
  committing subrepository foo
  committing subrepository foo/bar

Test explicit path commands within subrepos: add/forget
  $ echo z1 > foo/bar/z2.txt
  $ hg status -S
  ? foo/bar/z2.txt
  $ hg add foo/bar/z2.txt
  $ hg status -S
  A foo/bar/z2.txt
  $ hg forget foo/bar/z2.txt
  $ hg status -S
  ? foo/bar/z2.txt
  $ hg forget foo/bar/z2.txt
  not removing foo/bar/z2.txt: file is already untracked
  [1]
  $ hg status -S
  ? foo/bar/z2.txt
  $ rm foo/bar/z2.txt

Log with the relationships between repo and its subrepo:

  $ hg log --template '{rev}:{node|short} {desc}\n'
  2:1326fa26d0c0 2-3-2
  1:4b3c9ff4f66b 1-2-1
  0:23376cbba0d8 0-0-0

  $ hg -R foo log --template '{rev}:{node|short} {desc}\n'
  3:65903cebad86 2-3-2
  2:d254738c5f5e 0-2-1
  1:8629ce7dcc39 0-1-0
  0:af048e97ade2 0-0-0

  $ hg -R foo/bar log --template '{rev}:{node|short} {desc}\n'
  2:31ecbdafd357 2-3-2
  1:9647f22de499 0-1-1
  0:4904098473f9 0-0-0

Status between revisions:

  $ hg status -S
  $ hg status -S --rev 0:1
  M .hgsubstate
  M foo/.hgsubstate
  M foo/bar/z.txt
  M foo/y.txt
  $ hg diff --nodates -S -I '**/?.txt' --rev 0:1
  diff -r af048e97ade2 -r d254738c5f5e foo/y.txt
  --- a/foo/y.txt
  +++ b/foo/y.txt
  @@ -1,1 +1,2 @@
   y1
  +y2
  diff -r 4904098473f9 -r 9647f22de499 foo/bar/z.txt
  --- a/foo/bar/z.txt
  +++ b/foo/bar/z.txt
  @@ -1,1 +1,2 @@
   z1
  +z2

#if serve
  $ cd ..
  $ hg serve -R repo --debug -S -p $HGPORT -d --pid-file=hg1.pid -E error.log -A access.log
  adding  = $TESTTMP/repo
  adding foo = $TESTTMP/repo/foo
  adding foo/bar = $TESTTMP/repo/foo/bar
  listening at http://*:$HGPORT/ (bound to *:$HGPORT) (glob) (?)
  adding  = $TESTTMP/repo (?)
  adding foo = $TESTTMP/repo/foo (?)
  adding foo/bar = $TESTTMP/repo/foo/bar (?)
  $ cat hg1.pid >> $DAEMON_PIDS

  $ hg clone http://localhost:$HGPORT clone  --config progress.disable=True
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 5 changes to 3 files
  new changesets 23376cbba0d8:1326fa26d0c0
  updating to branch default
  cloning subrepo foo from http://localhost:$HGPORT/foo
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 7 changes to 3 files
  new changesets af048e97ade2:65903cebad86
  cloning subrepo foo/bar from http://localhost:$HGPORT/foo/bar
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 3 changes to 1 files
  new changesets 4904098473f9:31ecbdafd357
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ cat clone/foo/bar/z.txt
  z1
  z2
  z3

Clone pooling from a remote URL will share the top level repo and the subrepos,
even if they are referenced by remote URL.

  $ hg --config extensions.share= --config share.pool=$TESTTMP/pool \
  >    clone http://localhost:$HGPORT shared
  (sharing from new pooled repository 23376cbba0d87c15906bb3652584927c140907bf)
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 5 changes to 3 files
  new changesets 23376cbba0d8:1326fa26d0c0
  searching for changes
  no changes found
  updating working directory
  cloning subrepo foo from http://localhost:$HGPORT/foo
  (sharing from new pooled repository af048e97ade2e236f754f05d07013e586af0f8bf)
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 7 changes to 3 files
  new changesets af048e97ade2:65903cebad86
  searching for changes
  no changes found
  cloning subrepo foo/bar from http://localhost:$HGPORT/foo/bar
  (sharing from new pooled repository 4904098473f96c900fec436dad267edd4da59fad)
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 3 changes to 1 files
  new changesets 4904098473f9:31ecbdafd357
  searching for changes
  no changes found
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ cat access.log
  * "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * "GET /?cmd=batch HTTP/1.1" 200 - * (glob)
  * "GET /?cmd=getbundle HTTP/1.1" 200 - * (glob)
  * "GET /foo?cmd=capabilities HTTP/1.1" 200 - (glob)
  * "GET /foo?cmd=batch HTTP/1.1" 200 - * (glob)
  * "GET /foo?cmd=getbundle HTTP/1.1" 200 - * (glob)
  * "GET /foo/bar?cmd=capabilities HTTP/1.1" 200 - (glob)
  * "GET /foo/bar?cmd=batch HTTP/1.1" 200 - * (glob)
  * "GET /foo/bar?cmd=getbundle HTTP/1.1" 200 - * (glob)
  $LOCALIP - - [$LOGDATE$] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  $LOCALIP - - [$LOGDATE$] "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=0 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  $LOCALIP - - [$LOGDATE$] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  $LOCALIP - - [$LOGDATE$] "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  $LOCALIP - - [$LOGDATE$] "GET /?cmd=getbundle HTTP/1.1" 200 - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=1326fa26d0c00d2146c63b56bb6a45149d7325ac&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  $LOCALIP - - [$LOGDATE$] "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D1326fa26d0c00d2146c63b56bb6a45149d7325ac x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  $LOCALIP - - [$LOGDATE$] "GET /?cmd=getbundle HTTP/1.1" 200 - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=0&common=1326fa26d0c00d2146c63b56bb6a45149d7325ac&heads=1326fa26d0c00d2146c63b56bb6a45149d7325ac&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  $LOCALIP - - [$LOGDATE$] "GET /foo?cmd=capabilities HTTP/1.1" 200 - (glob)
  $LOCALIP - - [$LOGDATE$] "GET /foo?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=0 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  $LOCALIP - - [$LOGDATE$] "GET /foo?cmd=capabilities HTTP/1.1" 200 - (glob)
  $LOCALIP - - [$LOGDATE$] "GET /foo?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  $LOCALIP - - [$LOGDATE$] "GET /foo?cmd=getbundle HTTP/1.1" 200 - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=65903cebad86f1a84bd4f1134f62fa7dcb7a1c98&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  $LOCALIP - - [$LOGDATE$] "GET /foo?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D65903cebad86f1a84bd4f1134f62fa7dcb7a1c98 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  $LOCALIP - - [$LOGDATE$] "GET /foo?cmd=getbundle HTTP/1.1" 200 - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=0&common=65903cebad86f1a84bd4f1134f62fa7dcb7a1c98&heads=65903cebad86f1a84bd4f1134f62fa7dcb7a1c98&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  $LOCALIP - - [$LOGDATE$] "GET /foo/bar?cmd=capabilities HTTP/1.1" 200 - (glob)
  $LOCALIP - - [$LOGDATE$] "GET /foo/bar?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=0 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  $LOCALIP - - [$LOGDATE$] "GET /foo/bar?cmd=capabilities HTTP/1.1" 200 - (glob)
  $LOCALIP - - [$LOGDATE$] "GET /foo/bar?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  $LOCALIP - - [$LOGDATE$] "GET /foo/bar?cmd=getbundle HTTP/1.1" 200 - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=31ecbdafd357f54b281c9bd1d681bb90de219e22&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  $LOCALIP - - [$LOGDATE$] "GET /foo/bar?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D31ecbdafd357f54b281c9bd1d681bb90de219e22 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  $LOCALIP - - [$LOGDATE$] "GET /foo/bar?cmd=getbundle HTTP/1.1" 200 - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=0&common=31ecbdafd357f54b281c9bd1d681bb90de219e22&heads=31ecbdafd357f54b281c9bd1d681bb90de219e22&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)

  $ killdaemons.py
  $ rm hg1.pid error.log access.log
  $ cd repo
#endif

Enable progress extension for archive tests:

  $ cp $HGRCPATH $HGRCPATH.no-progress
  $ cat >> $HGRCPATH <<EOF
  > [progress]
  > disable=False
  > assume-tty = 1
  > delay = 0
  > # set changedelay really large so we don't see nested topics
  > changedelay = 30000
  > format = topic bar number
  > refresh = 0
  > width = 60
  > EOF

Test archiving to a directory tree (the doubled lines in the output
only show up in the test output, not in real usage):

  $ hg archive --subrepos ../archive
  \r (no-eol) (esc)
  archiving [                                           ] 0/3\r (no-eol) (esc)
  archiving [=============>                             ] 1/3\r (no-eol) (esc)
  archiving [===========================>               ] 2/3\r (no-eol) (esc)
  archiving [==========================================>] 3/3\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  archiving (foo) [                                     ] 0/3\r (no-eol) (esc)
  archiving (foo) [===========>                         ] 1/3\r (no-eol) (esc)
  archiving (foo) [=======================>             ] 2/3\r (no-eol) (esc)
  archiving (foo) [====================================>] 3/3\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  archiving (foo/bar) [                                 ] 0/1\r (no-eol) (esc)
  archiving (foo/bar) [================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  $ find ../archive | sort
  ../archive
  ../archive/.hg_archival.txt
  ../archive/.hgsub
  ../archive/.hgsubstate
  ../archive/foo
  ../archive/foo/.hgsub
  ../archive/foo/.hgsubstate
  ../archive/foo/bar
  ../archive/foo/bar/z.txt
  ../archive/foo/y.txt
  ../archive/x.txt

Test archiving to zip file (unzip output is unstable):

  $ hg archive --subrepos --prefix '.' ../archive.zip
  \r (no-eol) (esc)
  archiving [                                           ] 0/3\r (no-eol) (esc)
  archiving [=============>                             ] 1/3\r (no-eol) (esc)
  archiving [===========================>               ] 2/3\r (no-eol) (esc)
  archiving [==========================================>] 3/3\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  archiving (foo) [                                     ] 0/3\r (no-eol) (esc)
  archiving (foo) [===========>                         ] 1/3\r (no-eol) (esc)
  archiving (foo) [=======================>             ] 2/3\r (no-eol) (esc)
  archiving (foo) [====================================>] 3/3\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  archiving (foo/bar) [                                 ] 0/1\r (no-eol) (esc)
  archiving (foo/bar) [================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

(unzip date formating is unstable, we do not care about it and glob it out)

  $ unzip -l ../archive.zip | grep -v -- ----- | grep -E -v files$
  Archive:  ../archive.zip
    Length [ ]* Date [ ]* Time [ ]* Name (re)
        172  [0-9:\- ]*  .hg_archival.txt (re)
         10  [0-9:\- ]*  .hgsub (re)
         45  [0-9:\- ]*  .hgsubstate (re)
          3  [0-9:\- ]*  x.txt (re)
         10  [0-9:\- ]*  foo/.hgsub (re)
         45  [0-9:\- ]*  foo/.hgsubstate (re)
          9  [0-9:\- ]*  foo/y.txt (re)
          9  [0-9:\- ]*  foo/bar/z.txt (re)

Test archiving a revision that references a subrepo that is not yet
cloned:

#if hardlink
  $ hg clone -U . ../empty
  \r (no-eol) (esc)
  linking [===>                                       ]  1/10\r (no-eol) (esc) (no-rust !)
  linking [=======>                                   ]  2/10\r (no-eol) (esc) (no-rust !)
  linking [===========>                               ]  3/10\r (no-eol) (esc) (no-rust !)
  linking [================>                          ]  4/10\r (no-eol) (esc) (no-rust !)
  linking [====================>                      ]  5/10\r (no-eol) (esc) (no-rust !)
  linking [========================>                  ]  6/10\r (no-eol) (esc) (no-rust !)
  linking [=============================>             ]  7/10\r (no-eol) (esc) (no-rust !)
  linking [=================================>         ]  8/10\r (no-eol) (esc) (no-rust !)
  linking [=====================================>     ]  9/10\r (no-eol) (esc) (no-rust !)
  linking [==========================================>] 10/10\r (no-eol) (esc) (no-rust !)
  linking [==>                                        ]  1/12\r (no-eol) (esc) (rust !)
  linking [======>                                    ]  2/12\r (no-eol) (esc) (rust !)
  linking [=========>                                 ]  3/12\r (no-eol) (esc) (rust !)
  linking [=============>                             ]  4/12\r (no-eol) (esc) (rust !)
  linking [================>                          ]  5/12\r (no-eol) (esc) (rust !)
  linking [====================>                      ]  6/12\r (no-eol) (esc) (rust !)
  linking [========================>                  ]  7/12\r (no-eol) (esc) (rust !)
  linking [===========================>               ]  8/12\r (no-eol) (esc) (rust !)
  linking [===============================>           ]  9/12\r (no-eol) (esc) (rust !)
  linking [==================================>        ] 10/12\r (no-eol) (esc) (rust !)
  linking [======================================>    ] 11/12\r (no-eol) (esc) (rust !)
  linking [==========================================>] 12/12\r (no-eol) (esc) (rust !)
                                                              \r (no-eol) (esc)
#else
  $ hg clone -U . ../empty
  \r (no-eol) (esc)
  linking [ <=>                                           ] 1 (no-eol)
#endif

  $ cd ../empty
#if hardlink
#if rust
  $ hg archive --subrepos -r tip --prefix './' ../archive.tar.gz
  \r (no-eol) (esc)
  archiving [                                           ] 0/3\r (no-eol) (esc)
  archiving [=============>                             ] 1/3\r (no-eol) (esc)
  archiving [===========================>               ] 2/3\r (no-eol) (esc)
  archiving [==========================================>] 3/3\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  linking [==>                                        ]  1/11\r (no-eol) (esc)
  linking [======>                                    ]  2/11\r (no-eol) (esc)
  linking [==========>                                ]  3/11\r (no-eol) (esc)
  linking [==============>                            ]  4/11\r (no-eol) (esc)
  linking [==================>                        ]  5/11\r (no-eol) (esc)
  linking [======================>                    ]  6/11\r (no-eol) (esc)
  linking [==========================>                ]  7/11\r (no-eol) (esc)
  linking [==============================>            ]  8/11\r (no-eol) (esc)
  linking [==================================>        ]  9/11\r (no-eol) (esc)
  linking [======================================>    ] 10/11\r (no-eol) (esc)
  linking [==========================================>] 11/11\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  archiving (foo) [                                     ] 0/3\r (no-eol) (esc)
  archiving (foo) [===========>                         ] 1/3\r (no-eol) (esc)
  archiving (foo) [=======================>             ] 2/3\r (no-eol) (esc)
  archiving (foo) [====================================>] 3/3\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  linking [====>                                        ] 1/9\r (no-eol) (esc)
  linking [=========>                                   ] 2/9\r (no-eol) (esc)
  linking [==============>                              ] 3/9\r (no-eol) (esc)
  linking [===================>                         ] 4/9\r (no-eol) (esc)
  linking [========================>                    ] 5/9\r (no-eol) (esc)
  linking [=============================>               ] 6/9\r (no-eol) (esc)
  linking [==================================>          ] 7/9\r (no-eol) (esc)
  linking [=======================================>     ] 8/9\r (no-eol) (esc)
  linking [============================================>] 9/9\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  archiving (foo/bar) [                                 ] 0/1\r (no-eol) (esc)
  archiving (foo/bar) [================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  cloning subrepo foo from $TESTTMP/repo/foo
  cloning subrepo foo/bar from $TESTTMP/repo/foo/bar
#else
  $ hg archive --subrepos -r tip --prefix './' ../archive.tar.gz
  \r (no-eol) (esc)
  archiving [                                           ] 0/3\r (no-eol) (esc)
  archiving [=============>                             ] 1/3\r (no-eol) (esc)
  archiving [===========================>               ] 2/3\r (no-eol) (esc)
  archiving [==========================================>] 3/3\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  linking [====>                                        ] 1/9\r (no-eol) (esc)
  linking [=========>                                   ] 2/9\r (no-eol) (esc)
  linking [==============>                              ] 3/9\r (no-eol) (esc)
  linking [===================>                         ] 4/9\r (no-eol) (esc)
  linking [========================>                    ] 5/9\r (no-eol) (esc)
  linking [=============================>               ] 6/9\r (no-eol) (esc)
  linking [==================================>          ] 7/9\r (no-eol) (esc)
  linking [=======================================>     ] 8/9\r (no-eol) (esc)
  linking [============================================>] 9/9\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  archiving (foo) [                                     ] 0/3\r (no-eol) (esc)
  archiving (foo) [===========>                         ] 1/3\r (no-eol) (esc)
  archiving (foo) [=======================>             ] 2/3\r (no-eol) (esc)
  archiving (foo) [====================================>] 3/3\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  linking [=====>                                       ] 1/7\r (no-eol) (esc)
  linking [===========>                                 ] 2/7\r (no-eol) (esc)
  linking [==================>                          ] 3/7\r (no-eol) (esc)
  linking [========================>                    ] 4/7\r (no-eol) (esc)
  linking [===============================>             ] 5/7\r (no-eol) (esc)
  linking [=====================================>       ] 6/7\r (no-eol) (esc)
  linking [============================================>] 7/7\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  archiving (foo/bar) [                                 ] 0/1\r (no-eol) (esc)
  archiving (foo/bar) [================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  cloning subrepo foo from $TESTTMP/repo/foo
  cloning subrepo foo/bar from $TESTTMP/repo/foo/bar
#endif
#else
Note there's a slight output glitch on non-hardlink systems: the last
"linking" progress topic never gets closed, leading to slight output corruption on that platform.
  $ hg archive --subrepos -r tip --prefix './' ../archive.tar.gz
  \r (no-eol) (esc)
  archiving [                                           ] 0/3\r (no-eol) (esc)
  archiving [=============>                             ] 1/3\r (no-eol) (esc)
  archiving [===========================>               ] 2/3\r (no-eol) (esc)
  archiving [==========================================>] 3/3\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  linking [ <=>                                           ] 1\r (no-eol) (esc)
  cloning subrepo foo/bar from $TESTTMP/repo/foo/bar
#endif

Archive + subrepos uses '/' for all component separators

  $ tar -tzf ../archive.tar.gz | sort
  .hg_archival.txt
  .hgsub
  .hgsubstate
  foo/.hgsub
  foo/.hgsubstate
  foo/bar/z.txt
  foo/y.txt
  x.txt

The newly cloned subrepos contain no working copy:

  $ hg -R foo summary
  parent: -1:000000000000  (no revision checked out)
  branch: default
  commit: (clean)
  update: 4 new changesets (update)

Sharing a local repo with missing local subrepos (i.e. it was never updated
from null) works because the default path is copied from the source repo,
whereas clone should fail.

  $ hg --config progress.disable=True clone -U ../empty ../empty2

  $ hg --config extensions.share= --config progress.disable=True \
  >    share ../empty2 ../empty_share
  updating working directory
  sharing subrepo foo from $TESTTMP/empty/foo
  sharing subrepo foo/bar from $TESTTMP/empty/foo/bar
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg --config progress.disable=True clone ../empty2 ../empty_clone
  updating to branch default
  cloning subrepo foo from $TESTTMP/empty2/foo
  abort: repository $TESTTMP/empty2/foo not found
  [255]

Disable progress extension and cleanup:

  $ mv $HGRCPATH.no-progress $HGRCPATH

Test archiving when there is a directory in the way for a subrepo
created by archive:

  $ hg clone -U . ../almost-empty
  $ cd ../almost-empty
  $ mkdir foo
  $ echo f > foo/f
  $ hg archive --subrepos -r tip archive
  cloning subrepo foo from $TESTTMP/empty/foo
  abort: destination '$TESTTMP/almost-empty/foo' is not empty (in subrepository "foo")
  [255]

Clone and test outgoing:

  $ cd ..
  $ hg clone repo repo2
  updating to branch default
  cloning subrepo foo from $TESTTMP/repo/foo
  cloning subrepo foo/bar from $TESTTMP/repo/foo/bar
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd repo2
  $ hg outgoing -S
  comparing with $TESTTMP/repo
  searching for changes
  no changes found
  comparing with $TESTTMP/repo/foo
  searching for changes
  no changes found
  comparing with $TESTTMP/repo/foo/bar
  searching for changes
  no changes found
  [1]

Make nested change:

  $ echo y4 >> foo/y.txt
  $ hg diff --nodates -S
  diff -r 65903cebad86 foo/y.txt
  --- a/foo/y.txt
  +++ b/foo/y.txt
  @@ -1,3 +1,4 @@
   y1
   y2
   y3
  +y4
  $ hg commit --subrepos -m 3-4-2
  committing subrepository foo
  $ hg outgoing -S
  comparing with $TESTTMP/repo
  searching for changes
  changeset:   3:2655b8ecc4ee
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     3-4-2
  
  comparing with $TESTTMP/repo/foo
  searching for changes
  changeset:   4:e96193d6cb36
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     3-4-2
  
  comparing with $TESTTMP/repo/foo/bar
  searching for changes
  no changes found


Switch to original repo and setup default path:

  $ cd ../repo
  $ echo '[paths]' >> .hg/hgrc
  $ echo 'default = ../repo2' >> .hg/hgrc

Test incoming:

  $ hg incoming -S
  comparing with $TESTTMP/repo2
  searching for changes
  changeset:   3:2655b8ecc4ee
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     3-4-2
  
  comparing with $TESTTMP/repo2/foo
  searching for changes
  changeset:   4:e96193d6cb36
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     3-4-2
  
  comparing with $TESTTMP/repo2/foo/bar
  searching for changes
  no changes found

  $ hg incoming -S --bundle incoming.hg
  abort: cannot specify both --subrepos and --bundle
  [10]

Test missing subrepo:

  $ rm -r foo
  $ hg status -S
  warning: error "unknown revision '65903cebad86f1a84bd4f1134f62fa7dcb7a1c98'" in subrepository "foo"

Issue2619: IndexError: list index out of range on hg add with subrepos
The subrepo must sorts after the explicit filename.

  $ cd ..
  $ hg init test
  $ cd test
  $ hg init x
  $ echo abc > abc.txt
  $ hg ci -Am "abc"
  adding abc.txt
  $ echo "x = x" >> .hgsub
  $ hg add .hgsub
  $ touch a x/a
  $ hg add a x/a

  $ hg ci -Sm "added x"
  committing subrepository x
  $ echo abc > x/a
  $ hg revert --rev '.^' "set:subrepo('glob:x*')"
  abort: subrepository 'x' does not exist in 25ac2c9b3180!
  [255]

  $ cd ..