tests/test-init.t

branchmap: skip obsolete revisions while computing heads

It's time to make this part of core Mercurial obsolescence-aware.

Not considering obsolete revisions when computing heads is clearly what
Mercurial should do. But there are a couple of small issues:

- Let's say tip of the repo is obsolete. There are two ways of finding tiprev
  for branchcache (both are in use): looking at input data for update() and
  looking at computed heads after update(). Previously, repo tip would be
  tiprev of the branchcache. With this patch, an obsolete revision can no
  longer be tiprev. And depending on what way we use for finding tiprev (input
  data vs computed heads) we'll get a different result. This is relevant when
  recomputing cache key from cache contents, and may lead to updating cache for
  obsolete revisions multiple times (not from scratch, because it still would
  be considered valid for a subset of revisions in the repo).

- If all commits on a branch are obsolete, the branchcache will include that
  branch, but the list of heads will be empty (that's why there's now `if not
  heads` when recomputing tiprev/tipnode from cache contents). Having an entry
  for every branch is currently required for notify extension (and
  test-notify.t to pass), because notify doesn't handle revsets in its
  subscription config very well and will throw an error if e.g. a branch
  doesn't exist.

- Cloning static HTTP repos may try to stat() a non-existent obsstore file. The
  issue is that we now care about obsolescence during clone, but statichttpvfs
  doesn't implement a stat method, so a regular vfs.stat() is used, and it
  assumes that file is local and calls os.stat().  During a clone, we're trying
  to stat() .hg/store/obsstore, but in static HTTP case we provide a literal
  URL to the obsstore file on the remote as if it were a local file path. On
  windows it actually results in a failure in test-static-http.t.

The first issue is going to be addressed in a series dedicated to making sure
branchcache is properly and timely written on disk (it wasn't perfect even
before this patch, but there aren't enough tests to demonstrate that). The
second issue will be addressed in a future patch for notify extension that will
make it not raise an exception if a branch doesn't exist. And the third one was
partially addressed in the previous patch in this series and will be properly
fixed in a future patch when this series is accepted.

filteredhash() grows a keyword argument to make sure that branchcache is also
invalidated when there are new obsolete revisions in its repo view. This way
the on-disk cache format is unchanged and compatible between versions (although
it will obviously be recomputed when switching versions before/after this patch
and the repo has obsolete revisions).

There's one test that uses plain `hg up` without arguments while updated to a
pruned commit. To make this test pass, simply return current working directory
parent. Later in this series this code will be replaced by what prune command
does: updating to the closest non-obsolete ancestor.

Test changes:

test-branch-change.t: update branch head and cache update message. The head of
default listed in hg heads is changed because revision 2 was rewritten as 7,
and 1 is the closest ancestor on the same branch, so it's the head of default
now.

The cache invalidation message appears now because of the cache hash change,
since we're now accounting for obsolete revisions. Here's some context:

"served.hidden" repo filter means everything is visible (no filtered
revisions), so before this series branch2-served.hidden file would not contain
any cache hash, only revnum and node. Now it also has a hash when there are
obsolete changesets in the repo. The command that the message appears for is
changing branch of 5 and 6, which are now obsolete, so the cache hash changes.

In general, when cache is simply out-of-date, it can be updated using the old
version as a base. But if cache hash differs, then the cache for that
particular repo filter is recomputed (at least with the current
implementation). This is what happens here.

test-obsmarker-template.t: the pull reports 2 heads changed, but after that the
repo correctly sees only 1. The new message could be better, but it's still an
improvement over the previous one where hg pull suggested merging with an
obsolete revision.

test-obsolete.t: we can see these revisions in hg log --hidden, but they
shouldn't be considered heads even with --hidden.

test-rebase-obsolete{,2}.t: there were new heads created previously after
making new orphan changesets, but they weren't detected. Now we are properly
detecting and reporting them.

test-rebase-obsolete4.t: there's only one head now because the other head is
pruned and was falsely reported before.

test-static-http.t: add obsstore to the list of requested files. This file
doesn't exist on the remotes, but clients want it anyway (they get 404). This
is fine, because there are other nonexistent files that clients request, like
.hg/bookmarks or .hg/cache/tags2-served.

Differential Revision: https://phab.mercurial-scm.org/D12097

This test tries to exercise the ssh functionality with a dummy script

  $ checknewrepo()
  > {
  >    name=$1
  >    if [ -d "$name"/.hg/store ]; then
  >    echo store created
  >    fi
  >    if [ -f "$name"/.hg/00changelog.i ]; then
  >    echo 00changelog.i created
  >    fi
  >    hg debugrequires -R "$name"
  > }

creating 'local'

  $ hg init local
  $ checknewrepo local
  store created
  00changelog.i created
  dotencode
  dirstate-v2 (dirstate-v2 !)
  fncache
  generaldelta
  persistent-nodemap (rust !)
  revlog-compression-zstd (zstd !)
  revlogv1
  share-safe
  sparserevlog
  store
  testonly-simplestore (reposimplestore !)
  $ echo this > local/foo
  $ hg ci --cwd local -A -m "init"
  adding foo

test custom revlog chunk cache sizes

  $ hg --config format.chunkcachesize=0 log -R local -pv
  abort: revlog chunk cache size 0 is not greater than 0
  [50]
  $ hg --config format.chunkcachesize=1023 log -R local -pv
  abort: revlog chunk cache size 1023 is not a power of 2
  [50]
  $ hg --config format.chunkcachesize=1024 log -R local -pv
  changeset:   0:08b9e9f63b32
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  files:       foo
  description:
  init
  
  
  diff -r 000000000000 -r 08b9e9f63b32 foo
  --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
  +++ b/foo	Thu Jan 01 00:00:00 1970 +0000
  @@ -0,0 +1,1 @@
  +this
  

creating repo with format.usestore=false

  $ hg --config format.usestore=false init old
  $ checknewrepo old
  dirstate-v2 (dirstate-v2 !)
  generaldelta
  persistent-nodemap (rust !)
  revlog-compression-zstd (zstd !)
  revlogv1
  testonly-simplestore (reposimplestore !)
  sparserevlog

creating repo with format.usefncache=false

  $ hg --config format.usefncache=false init old2
  $ checknewrepo old2
  store created
  00changelog.i created
  dirstate-v2 (dirstate-v2 !)
  generaldelta
  persistent-nodemap (rust !)
  revlog-compression-zstd (zstd !)
  revlogv1
  share-safe
  sparserevlog
  store
  testonly-simplestore (reposimplestore !)

creating repo with format.dotencode=false

  $ hg --config format.dotencode=false init old3
  $ checknewrepo old3
  store created
  00changelog.i created
  dirstate-v2 (dirstate-v2 !)
  fncache
  generaldelta
  persistent-nodemap (rust !)
  revlog-compression-zstd (zstd !)
  revlogv1
  share-safe
  sparserevlog
  store
  testonly-simplestore (reposimplestore !)

creating repo with format.dotencode=false

  $ hg --config format.generaldelta=false --config format.usegeneraldelta=false --config format.sparse-revlog=no init old4
  $ checknewrepo old4
  store created
  00changelog.i created
  dotencode
  dirstate-v2 (dirstate-v2 !)
  fncache
  persistent-nodemap (rust !)
  revlog-compression-zstd (zstd !)
  revlogv1
  share-safe
  store
  testonly-simplestore (reposimplestore !)

test failure

  $ hg init local
  abort: repository local already exists
  [255]

init+push to remote2

  $ hg init ssh://user@dummy/remote2
  $ hg incoming -R remote2 local
  comparing with local
  changeset:   0:08b9e9f63b32
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     init
  

  $ hg push -R local ssh://user@dummy/remote2
  pushing to ssh://user@dummy/remote2
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files

clone to remote1

  $ hg clone local ssh://user@dummy/remote1
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files

The largefiles extension doesn't crash
  $ hg clone local ssh://user@dummy/remotelf --config extensions.largefiles=
  The fsmonitor extension is incompatible with the largefiles extension and has been disabled. (fsmonitor !)
  The fsmonitor extension is incompatible with the largefiles extension and has been disabled. (fsmonitor !)
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files

init to existing repo

  $ hg init ssh://user@dummy/remote1
  abort: repository remote1 already exists
  abort: could not create remote repo
  [255]

clone to existing repo

  $ hg clone local ssh://user@dummy/remote1
  abort: repository remote1 already exists
  abort: could not create remote repo
  [255]

output of dummyssh

  $ cat dummylog
  Got arguments 1:user@dummy 2:hg init remote2
  Got arguments 1:user@dummy 2:hg -R remote2 serve --stdio
  Got arguments 1:user@dummy 2:hg -R remote2 serve --stdio
  Got arguments 1:user@dummy 2:hg init remote1
  Got arguments 1:user@dummy 2:hg -R remote1 serve --stdio
  Got arguments 1:user@dummy 2:hg init remotelf
  Got arguments 1:user@dummy 2:hg -R remotelf serve --stdio
  Got arguments 1:user@dummy 2:hg init remote1
  Got arguments 1:user@dummy 2:hg init remote1

comparing repositories

  $ hg tip -q -R local
  0:08b9e9f63b32
  $ hg tip -q -R remote1
  0:08b9e9f63b32
  $ hg tip -q -R remote2
  0:08b9e9f63b32

check names for repositories (clashes with URL schemes, special chars)

  $ for i in bundle file hg http https old-http ssh static-http "with space"; do
  >   printf "hg init \"$i\"... "
  >   hg init "$i"
  >   test -d "$i" -a -d "$i/.hg" && echo "ok" || echo "failed"
  > done
  hg init "bundle"... ok
  hg init "file"... ok
  hg init "hg"... ok
  hg init "http"... ok
  hg init "https"... ok
  hg init "old-http"... ok
  hg init "ssh"... ok
  hg init "static-http"... ok
  hg init "with space"... ok
#if eol-in-paths
/* " " is not a valid name for a directory on Windows */
  $ hg init " "
  $ test -d " "
  $ test -d " /.hg"
#endif

creating 'local/sub/repo'

  $ hg init local/sub/repo
  $ checknewrepo local/sub/repo
  store created
  00changelog.i created
  dotencode
  dirstate-v2 (dirstate-v2 !)
  fncache
  generaldelta
  persistent-nodemap (rust !)
  revlog-compression-zstd (zstd !)
  revlogv1
  share-safe
  sparserevlog
  store
  testonly-simplestore (reposimplestore !)

prepare test of init of url configured from paths

  $ echo '[paths]' >> $HGRCPATH
  $ echo "somewhere = `pwd`/url from paths" >> $HGRCPATH
  $ echo "elsewhere = `pwd`/another paths url" >> $HGRCPATH

init should (for consistency with clone) expand the url

  $ hg init somewhere
  $ checknewrepo "url from paths"
  store created
  00changelog.i created
  dotencode
  dirstate-v2 (dirstate-v2 !)
  fncache
  generaldelta
  persistent-nodemap (rust !)
  revlog-compression-zstd (zstd !)
  revlogv1
  share-safe
  sparserevlog
  store
  testonly-simplestore (reposimplestore !)

verify that clone also expand urls

  $ hg clone somewhere elsewhere
  updating to branch default
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ checknewrepo "another paths url"
  store created
  00changelog.i created
  dotencode
  dirstate-v2 (dirstate-v2 !)
  fncache
  generaldelta
  persistent-nodemap (rust !)
  revlog-compression-zstd (zstd !)
  revlogv1
  share-safe
  sparserevlog
  store
  testonly-simplestore (reposimplestore !)

clone bookmarks

  $ hg -R local bookmark test
  $ hg -R local bookmarks
   * test                      0:08b9e9f63b32
  $ hg clone local ssh://user@dummy/remote-bookmarks
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  exporting bookmark test
  $ hg -R remote-bookmarks bookmarks
     test                      0:08b9e9f63b32

Check format constraint
-----------------------

  $ hg init issue6056 --config format.usegeneraldelta=0 --config format.sparse-revlog=0
  $ cd issue6056
  $ echo foo > 1
  $ echo foo > 2
  $ echo foo > 3
  $ echo foo > 4
  $ echo foo > 5
  $ hg add *

Build a bogus repository (sparserevlog without general delta)

  $ hg commit -m 'initial changesets'
  $ echo 'sparserevlog' >> .hg/requires
  $ for x in `$TESTDIR/seq.py 100`; do
  >     echo $x >> `expr $x % 5 + 1`
  >     hg commit -m $x
  > done
  $ cd ..