tests/test-narrow-shallow.t

py3: make stdout line-buffered if connected to a TTY

Status messages that are to be shown on the terminal should be written to the
file descriptor before anything further is done, to keep the user updated.

One common way to achieve this is to make stdout line-buffered if it is
connected to a TTY. This is done on Python 2 (except on Windows, where libc,
which the CPython 2 streams depend on, does not properly support this).

Python 3 rolls it own I/O streams. On Python 3, buffered binary streams can't be
set line-buffered. The previous code (added in 227ba1afcb65) incorrectly
assumed that on Python 3, pycompat.stdout (sys.stdout.buffer) is already
line-buffered. However the interpreter initializes it with a block-buffered
stream or an unbuffered stream (when the -u option or the PYTHONUNBUFFERED
environment variable is set), never with a line-buffered stream.

One example where the current behavior is unacceptable is when running
`hg pull https://www.mercurial-scm.org/repo/hg` on Python 3, where the line
"pulling from https://www.mercurial-scm.org/repo/hg" does not appear on the
terminal before the hg process blocks while waiting for the server.

Various approaches to fix this problem are possible, including:

1. Weaken the contract of procutil.stdout to not give any guarantees about
   buffering behavior. In this case, users of procutil.stdout need to be
   changed to do enough flushes. In particular,
  1. either ui must insert enough flushes for ui.write() and friends, or
  2. ui.write() and friends get split into flushing and fully buffered
     methods, or
  3. users of ui.write() and friends must flush explicitly.
2. Make stdout unbuffered.
3. Make stdout line-buffered. Since Python 3 does not natively support that for
   binary streams, we must implement it ourselves.

(2.) is problematic because using unbuffered I/O changes the performance
characteristics significantly compared to line-buffered (which is used on
Python 2) and this would be a regression.

(1.2.) and (1.3) are a substantial amount of work. It’s unclear whether the
added complexity would be justified, given that raw performance doesn’t matter
that much when writing to a terminal much faster than the user could read it.

(1.1.) pushes complexity into the ui class instead of separating the concern of
how stdout is buffered. Other users of procutil.stdout would still need to take
care of the flushes.

This patch implements (3.). The general performance considerations are very
similar to (1.1.). The extra method invocation and method forwarding add a
little more overhead if the class is used. In exchange, it doesn’t add overhead
if not used.


For the benchmarks, I compared the previous implementation (incorrect on Python
3), (1.1.), (3.) and (2.). The command was chosen so that the streams were
configured as if they were writing to a TTY, but actually write to a pager,
which is also the default:
HGRCPATH=/dev/null python3 ./hg --cwd ~/vcs/mozilla-central --time --pager yes --config pager.pager='cat > /dev/null' status --all

previous:
time: real 7.880 secs (user 7.290+0.050 sys 0.580+0.170)
time: real 7.830 secs (user 7.220+0.070 sys 0.590+0.140)
time: real 7.800 secs (user 7.210+0.050 sys 0.570+0.170)

(1.1.) using Yuya Nishihara’s patch:
time: real 9.860 secs (user 8.670+0.350 sys 1.160+0.830)
time: real 9.540 secs (user 8.430+0.370 sys 1.100+0.770)
time: real 9.830 secs (user 8.630+0.370 sys 1.180+0.840)

(3.) using this patch:
time: real 9.580 secs (user 8.480+0.350 sys 1.090+0.770)
time: real 9.670 secs (user 8.480+0.330 sys 1.170+0.860)
time: real 9.640 secs (user 8.500+0.350 sys 1.130+0.810)

(2.) using a previous patch by me:
time: real 10.480 secs (user 8.850+0.720 sys 1.590+1.500)
time: real 10.490 secs (user 8.750+0.750 sys 1.710+1.470)
time: real 10.240 secs (user 8.600+0.700 sys 1.590+1.510)


As expected, there’s no difference on Python 2, as exactly the same code paths
are used:

previous:
time: real 6.950 secs (user 5.870+0.330 sys 1.070+0.770)
time: real 7.040 secs (user 6.040+0.360 sys 0.980+0.750)
time: real 7.070 secs (user 5.950+0.360 sys 1.100+0.760)

this patch:
time: real 7.010 secs (user 5.900+0.390 sys 1.070+0.730)
time: real 7.000 secs (user 5.850+0.350 sys 1.120+0.760)
time: real 7.000 secs (user 5.790+0.380 sys 1.170+0.710)

#require no-reposimplestore

  $ . "$TESTDIR/narrow-library.sh"

  $ hg init master
  $ cd master
  $ cat >> .hg/hgrc <<EOF
  > [narrow]
  > serveellipses=True
  > EOF
  $ for x in `$TESTDIR/seq.py 10`
  > do
  >   echo $x > "f$x"
  >   hg add "f$x"
  > done
  $ hg commit -m "Add root files"
  $ mkdir d1 d2
  $ for x in `$TESTDIR/seq.py 10`
  > do
  >   echo d1/$x > "d1/f$x"
  >   hg add "d1/f$x"
  >   echo d2/$x > "d2/f$x"
  >   hg add "d2/f$x"
  > done
  $ hg commit -m "Add d1 and d2"
  $ for x in `$TESTDIR/seq.py 10`
  > do
  >   echo f$x rev2 > "f$x"
  >   echo d1/f$x rev2 > "d1/f$x"
  >   echo d2/f$x rev2 > "d2/f$x"
  >   hg commit -m "Commit rev2 of f$x, d1/f$x, d2/f$x"
  > done
  $ cd ..

narrow and shallow clone the d2 directory

  $ hg clone --narrow ssh://user@dummy/master shallow --include "d2" --depth 2
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 13 changes to 10 files
  new changesets *:* (glob)
  updating to branch default
  10 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd shallow
  $ hg log -T '{rev}{if(ellipsis,"...")}: {desc}\n'
  3: Commit rev2 of f10, d1/f10, d2/f10
  2: Commit rev2 of f9, d1/f9, d2/f9
  1: Commit rev2 of f8, d1/f8, d2/f8
  0...: Commit rev2 of f7, d1/f7, d2/f7
  $ hg update 0
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cat d2/f7 d2/f8
  d2/f7 rev2
  d2/8

  $ cd ..

change every upstream file once

  $ cd master
  $ for x in `$TESTDIR/seq.py 10`
  > do
  >   echo f$x rev3 > "f$x"
  >   echo d1/f$x rev3 > "d1/f$x"
  >   echo d2/f$x rev3 > "d2/f$x"
  >   hg commit -m "Commit rev3 of f$x, d1/f$x, d2/f$x"
  > done
  $ cd ..

pull new changes with --depth specified. There were 10 changes to the d2
directory but the shallow pull should only fetch 3.

  $ cd shallow
  $ hg pull --depth 2
  pulling from ssh://user@dummy/master
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 10 changes to 10 files
  new changesets *:* (glob)
  (run 'hg update' to get a working copy)
  $ hg log -T '{rev}{if(ellipsis,"...")}: {desc}\n'
  7: Commit rev3 of f10, d1/f10, d2/f10
  6: Commit rev3 of f9, d1/f9, d2/f9
  5: Commit rev3 of f8, d1/f8, d2/f8
  4...: Commit rev3 of f7, d1/f7, d2/f7
  3: Commit rev2 of f10, d1/f10, d2/f10
  2: Commit rev2 of f9, d1/f9, d2/f9
  1: Commit rev2 of f8, d1/f8, d2/f8
  0...: Commit rev2 of f7, d1/f7, d2/f7
  $ hg update 4
  merging d2/f1
  merging d2/f2
  merging d2/f3
  merging d2/f4
  merging d2/f5
  merging d2/f6
  merging d2/f7
  3 files updated, 7 files merged, 0 files removed, 0 files unresolved
  $ cat d2/f7 d2/f8
  d2/f7 rev3
  d2/f8 rev2
  $ hg update 7
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cat d2/f10
  d2/f10 rev3

  $ cd ..

cannot clone with zero or negative depth

  $ hg clone --narrow ssh://user@dummy/master bad --include "d2" --depth 0
  requesting all changes
  remote: abort: depth must be positive, got 0
  abort: pull failed on remote
  [255]
  $ hg clone --narrow ssh://user@dummy/master bad --include "d2" --depth -1
  requesting all changes
  remote: abort: depth must be positive, got -1
  abort: pull failed on remote
  [255]