view contrib/revsetbenchmarks.py @ 26522:10f14bb22950

shelve: add utility to abort current transaction but keep dirstate

"hg shelve" and "hg unshelve" use aborting a current transaction to
discard temporary changes while (un)shelving.

This assumes that dirstate changes in a transaction scope are kept
even after aborting it. But this assumption will be broken by
"transactional dirstate". See the wiki page below for detail about it.

    https://mercurial.selenic.com/wiki/DirstateTransactionPlan

This patch adds utility function "_aborttransaction()" to abort
current transaction but keep dirstate changes for (un)shelving.

'dirstate.invalidate()' just after aborting a transaction should be
removed soon by subsequent patch, which writes or discards in-memory
dirstate changes at releasing transaction according to the result of
it.

BTW, there are some other ways below, which (seem to, at first glance)
resolve this issue. But this patch chose straightforward way for ease
of review and future refactorring.

  - commit transaction at first, and then rollback it

    It causes unintentional "dirty read" of running transaction to
    other processes at committing it.

  - use dirstateguard to save and restore shelved dirstate

    After DirstateTransactionPlan, making 'dirstate.write()' write
    in-memory changes into actual file requires
    'transaction.writepending()' while transaction running.

    It causes meaningless writing other in-memory changes out, even
    though they are never referred.

    In addition to it, it isn't desirable that scope of dirstateguard
    and transaction intersects each other.

  - get list of files changed from the parent, keep it in memory, and
    emulate that changes after aborting transaction

    This additional memory consumption may block aborting transaction
    in large repository (on small resource environment).

#!/usr/bin/env python

# Measure the performance of a list of revsets against multiple revisions
# defined by parameter. Checkout one by one and run perfrevset with every
# revset in the list to benchmark its performance.
#
# You should run this from the root of your mercurial repository.
#
# call with --help for details

import sys
import os
import re
import math
from subprocess import check_call, Popen, CalledProcessError, STDOUT, PIPE
# cannot use argparse, python 2.7 only
from optparse import OptionParser

DEFAULTVARIANTS = ['plain', 'min', 'max', 'first', 'last',
                   'reverse', 'reverse+first', 'reverse+last',
                   'sort', 'sort+first', 'sort+last']

def check_output(*args, **kwargs):
    kwargs.setdefault('stderr', PIPE)
    kwargs.setdefault('stdout', PIPE)
    proc = Popen(*args, **kwargs)
    output, error = proc.communicate()
    if proc.returncode != 0:
        raise CalledProcessError(proc.returncode, ' '.join(args[0]))
    return output

def update(rev):
    """update the repo to a revision"""
    try:
        check_call(['hg', 'update', '--quiet', '--check', str(rev)])
        check_output(['make', 'local'],
                     stderr=None)  # suppress output except for error/warning
    except CalledProcessError as exc:
        print >> sys.stderr, 'update to revision %s failed, aborting' % rev
        sys.exit(exc.returncode)


def hg(cmd, repo=None):
    """run a mercurial command

    <cmd> is the list of command + argument,
    <repo> is an optional repository path to run this command in."""
    fullcmd = ['./hg']
    if repo is not None:
        fullcmd += ['-R', repo]
    fullcmd += ['--config',
                'extensions.perf=' + os.path.join(contribdir, 'perf.py')]
    fullcmd += cmd
    return check_output(fullcmd, stderr=STDOUT)

def perf(revset, target=None):
    """run benchmark for this very revset"""
    try:
        output = hg(['perfrevset', revset], repo=target)
        return parseoutput(output)
    except CalledProcessError as exc:
        print >> sys.stderr, 'abort: cannot run revset benchmark: %s' % exc.cmd
        if exc.output is None:
            print >> sys.stderr, '(no ouput)'
        else:
            print >> sys.stderr, exc.output
        return None

outputre = re.compile(r'! wall (\d+.\d+) comb (\d+.\d+) user (\d+.\d+) '
                      'sys (\d+.\d+) \(best of (\d+)\)')

def parseoutput(output):
    """parse a textual output into a dict

    We cannot just use json because we want to compare with old
    versions of Mercurial that may not support json output.
    """
    match = outputre.search(output)
    if not match:
        print >> sys.stderr, 'abort: invalid output:'
        print >> sys.stderr, output
        sys.exit(1)
    return {'comb': float(match.group(2)),
            'count': int(match.group(5)),
            'sys': float(match.group(3)),
            'user': float(match.group(4)),
            'wall': float(match.group(1)),
            }

def printrevision(rev):
    """print data about a revision"""
    sys.stdout.write("Revision ")
    sys.stdout.flush()
    check_call(['hg', 'log', '--rev', str(rev), '--template',
                '{if(tags, " ({tags})")} '
                '{rev}:{node|short}: {desc|firstline}\n'])

def idxwidth(nbidx):
    """return the max width of number used for index

    This is similar to log10(nbidx), but we use custom code here
    because we start with zero and we'd rather not deal with all the
    extra rounding business that log10 would imply.
    """
    nbidx -= 1 # starts at 0
    idxwidth = 0
    while nbidx:
        idxwidth += 1
        nbidx //= 10
    if not idxwidth:
        idxwidth = 1
    return idxwidth

def getfactor(main, other, field, sensitivity=0.05):
    """return the relative factor between values for 'field' in main and other

    Return None if the factor is insignicant (less than <sensitivity>
    variation)."""
    factor = 1
    if main is not None:
        factor = other[field] / main[field]
    low, high = 1 - sensitivity, 1 + sensitivity
    if (low < factor < high):
        return None
    return factor

def formatfactor(factor):
    """format a factor into a 4 char string

     22%
    156%
    x2.4
     x23
    x789
    x1e4
    x5x7

    """
    if factor is None:
        return '    '
    elif factor < 2:
        return '%3i%%' % (factor * 100)
    elif factor < 10:
        return 'x%3.1f' % factor
    elif factor < 1000:
        return '%4s' % ('x%i' % factor)
    else:
        order = int(math.log(factor)) + 1
        while 1 < math.log(factor):
            factor //= 0
        return 'x%ix%i' % (factor, order)

def formattiming(value):
    """format a value to strictly 8 char, dropping some precision if needed"""
    if value < 10**7:
        return ('%.6f' % value)[:8]
    else:
        # value is HUGE very unlikely to happen (4+ month run)
        return '%i' % value

_marker = object()
def printresult(variants, idx, data, maxidx, verbose=False, reference=_marker):
    """print a line of result to stdout"""
    mask = '%%0%ii) %%s' % idxwidth(maxidx)

    out = []
    for var in variants:
        if data[var] is None:
            out.append('error   ')
            out.append(' ' * 4)
            continue
        out.append(formattiming(data[var]['wall']))
        if reference is not _marker:
            factor = None
            if reference is not None:
                factor = getfactor(reference[var], data[var], 'wall')
            out.append(formatfactor(factor))
        if verbose:
            out.append(formattiming(data[var]['comb']))
            out.append(formattiming(data[var]['user']))
            out.append(formattiming(data[var]['sys']))
            out.append('%6d'    % data[var]['count'])
    print mask % (idx, ' '.join(out))

def printheader(variants, maxidx, verbose=False, relative=False):
    header = [' ' * (idxwidth(maxidx) + 1)]
    for var in variants:
        if not var:
            var = 'iter'
        if 8 < len(var):
            var = var[:3] + '..' + var[-3:]
        header.append('%-8s' % var)
        if relative:
            header.append('    ')
        if verbose:
            header.append('%-8s' % 'comb')
            header.append('%-8s' % 'user')
            header.append('%-8s' % 'sys')
            header.append('%6s' % 'count')
    print ' '.join(header)

def getrevs(spec):
    """get the list of rev matched by a revset"""
    try:
        out = check_output(['hg', 'log', '--template={rev}\n', '--rev', spec])
    except CalledProcessError as exc:
        print >> sys.stderr, "abort, can't get revision from %s" % spec
        sys.exit(exc.returncode)
    return [r for r in out.split() if r]


def applyvariants(revset, variant):
    if variant == 'plain':
        return revset
    for var in variant.split('+'):
        revset = '%s(%s)' % (var, revset)
    return revset

helptext="""This script will run multiple variants of provided revsets using
different revisions in your mercurial repository. After the benchmark are run
summary output is provided. Use itto demonstrate speed improvements or pin
point regressions. Revsets to run are specified in a file (or from stdin), one
revsets per line. Line starting with '#' will be ignored, allowing insertion of
comments."""
parser = OptionParser(usage="usage: %prog [options] <revs>",
                      description=helptext)
parser.add_option("-f", "--file",
                  help="read revset from FILE (stdin if omitted)",
                  metavar="FILE")
parser.add_option("-R", "--repo",
                  help="run benchmark on REPO", metavar="REPO")

parser.add_option("-v", "--verbose",
                  action='store_true',
                  help="display all timing data (not just best total time)")

parser.add_option("", "--variants",
                  default=','.join(DEFAULTVARIANTS),
                  help="comma separated list of variant to test "
                       "(eg: plain,min,sorted) (plain = no modification)")

(options, args) = parser.parse_args()

if not args:
    parser.print_help()
    sys.exit(255)

# the directory where both this script and the perf.py extension live.
contribdir = os.path.dirname(__file__)

revsetsfile = sys.stdin
if options.file:
    revsetsfile = open(options.file)

revsets = [l.strip() for l in revsetsfile if not l.startswith('#')]
revsets = [l for l in revsets if l]

print "Revsets to benchmark"
print "----------------------------"

for idx, rset in enumerate(revsets):
    print "%i) %s" % (idx, rset)

print "----------------------------"
print

revs = []
for a in args:
    revs.extend(getrevs(a))

variants = options.variants.split(',')

results = []
for r in revs:
    print "----------------------------"
    printrevision(r)
    print "----------------------------"
    update(r)
    res = []
    results.append(res)
    printheader(variants, len(revsets), verbose=options.verbose)
    for idx, rset in enumerate(revsets):
        varres = {}
        for var in variants:
            varrset = applyvariants(rset, var)
            data = perf(varrset, target=options.repo)
            varres[var] = data
        res.append(varres)
        printresult(variants, idx, varres, len(revsets),
                    verbose=options.verbose)
        sys.stdout.flush()
    print "----------------------------"


print """

Result by revset
================
"""

print 'Revision:'
for idx, rev in enumerate(revs):
    sys.stdout.write('%i) ' % idx)
    sys.stdout.flush()
    printrevision(rev)

print
print

for ridx, rset in enumerate(revsets):

    print "revset #%i: %s" % (ridx, rset)
    printheader(variants, len(results), verbose=options.verbose, relative=True)
    ref = None
    for idx, data in enumerate(results):
        printresult(variants, idx, data[ridx], len(results),
                    verbose=options.verbose, reference=ref)
        ref = data[ridx]
    print