filemerge: make the 'local' path match the format that 'base' and 'other' use
If we pass a separate '$output' arg to the merge tool, we produce four files:
local, base, other, and output. In this situation, 'output' will be the
original filename, 'base' and 'other' are temporary files, and previously
'local' would be the backup file (so if 'output' was foo.txt, 'local' would be
foo.txt.orig).
This change makes it so that 'local' follows the same pattern as 'base' and
'other' - it will be a temporary file either in the
`experimental.mergetempdirprefix`-controlled directory with a name like
foo~local.txt, or in the normal system-wide temp dir with a name like
foo~local.RaNd0m.txt.
For the cases where the merge tool does not use an '$output' arg, 'local' is
still the destination filename, and 'base' and 'other' are unchanged.
The hope is that this is much easier for people to reason about; rather than
having a tool like Meld pop up with three panes, one of them with the filename
"foo.txt.orig", one with the filename "foo.txt", and one with
"foo~other.StuFf2.txt", we can (when the merge temp dir stuff is enabled) make
it show up as "foo~local.txt", "foo.txt" and "foo~other.txt", respectively.
This also opens the door to future customization, such as getting the
operation-provided labels and a hash prefix into the filenames (so we see
something like "foo~dest.abc123", "foo.txt", and "foo~src.d4e5f6").
Differential Revision: https://phab.mercurial-scm.org/D2889
$ hg init ignorerepo
$ cd ignorerepo
debugignore with no hgignore should be deterministic:
$ hg debugignore
<nevermatcher>
Issue562: .hgignore requires newline at end:
$ touch foo
$ touch bar
$ touch baz
$ cat > makeignore.py <<EOF
> f = open(".hgignore", "w")
> f.write("ignore\n")
> f.write("foo\n")
> # No EOL here
> f.write("bar")
> f.close()
> EOF
$ $PYTHON makeignore.py
Should display baz only:
$ hg status
? baz
$ rm foo bar baz .hgignore makeignore.py
$ touch a.o
$ touch a.c
$ touch syntax
$ mkdir dir
$ touch dir/a.o
$ touch dir/b.o
$ touch dir/c.o
$ hg add dir/a.o
$ hg commit -m 0
$ hg add dir/b.o
$ hg status
A dir/b.o
? a.c
? a.o
? dir/c.o
? syntax
$ echo "*.o" > .hgignore
$ hg status
abort: $TESTTMP/ignorerepo/.hgignore: invalid pattern (relre): *.o (glob)
[255]
Ensure given files are relative to cwd
$ echo "dir/.*\.o" > .hgignore
$ hg status -i
I dir/c.o
$ hg debugignore dir/c.o dir/missing.o
dir/c.o is ignored
(ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: 'dir/.*\.o') (glob)
dir/missing.o is ignored
(ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: 'dir/.*\.o') (glob)
$ cd dir
$ hg debugignore c.o missing.o
c.o is ignored
(ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: 'dir/.*\.o') (glob)
missing.o is ignored
(ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: 'dir/.*\.o') (glob)
For icasefs, inexact matches also work, except for missing files
#if icasefs
$ hg debugignore c.O missing.O
c.o is ignored
(ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: 'dir/.*\.o') (glob)
missing.O is not ignored
#endif
$ cd ..
$ echo ".*\.o" > .hgignore
$ hg status
A dir/b.o
? .hgignore
? a.c
? syntax
Ensure that comments work:
$ touch 'foo#bar' 'quux#'
#if no-windows
$ touch 'baz\#wat'
#endif
$ cat <<'EOF' >> .hgignore
> # full-line comment
> # whitespace-only comment line
> syntax# pattern, no whitespace, then comment
> a.c # pattern, then whitespace, then comment
> baz\\# # escaped comment character
> foo\#b # escaped comment character
> quux\## escaped comment character at end of name
> EOF
$ hg status
A dir/b.o
? .hgignore
$ rm 'foo#bar' 'quux#'
#if no-windows
$ rm 'baz\#wat'
#endif
Check that '^\.' does not ignore the root directory:
$ echo "^\." > .hgignore
$ hg status
A dir/b.o
? a.c
? a.o
? dir/c.o
? syntax
Test that patterns from ui.ignore options are read:
$ echo > .hgignore
$ cat >> $HGRCPATH << EOF
> [ui]
> ignore.other = $TESTTMP/ignorerepo/.hg/testhgignore
> EOF
$ echo "glob:**.o" > .hg/testhgignore
$ hg status
A dir/b.o
? .hgignore
? a.c
? syntax
empty out testhgignore
$ echo > .hg/testhgignore
Test relative ignore path (issue4473):
$ cat >> $HGRCPATH << EOF
> [ui]
> ignore.relative = .hg/testhgignorerel
> EOF
$ echo "glob:*.o" > .hg/testhgignorerel
$ cd dir
$ hg status
A dir/b.o
? .hgignore
? a.c
? syntax
$ cd ..
$ echo > .hg/testhgignorerel
$ echo "syntax: glob" > .hgignore
$ echo "re:.*\.o" >> .hgignore
$ hg status
A dir/b.o
? .hgignore
? a.c
? syntax
$ echo "syntax: invalid" > .hgignore
$ hg status
$TESTTMP/ignorerepo/.hgignore: ignoring invalid syntax 'invalid'
A dir/b.o
? .hgignore
? a.c
? a.o
? dir/c.o
? syntax
$ echo "syntax: glob" > .hgignore
$ echo "*.o" >> .hgignore
$ hg status
A dir/b.o
? .hgignore
? a.c
? syntax
$ echo "relglob:syntax*" > .hgignore
$ hg status
A dir/b.o
? .hgignore
? a.c
? a.o
? dir/c.o
$ echo "relglob:*" > .hgignore
$ hg status
A dir/b.o
$ cd dir
$ hg status .
A b.o
$ hg debugignore
<includematcher includes='(?:(?:|.*/)[^/]*(?:/|$))'>
$ hg debugignore b.o
b.o is ignored
(ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: '*') (glob)
$ cd ..
Check patterns that match only the directory
"(fsmonitor !)" below assumes that fsmonitor is enabled with
"walk_on_invalidate = false" (default), which doesn't involve
re-walking whole repository at detection of .hgignore change.
$ echo "^dir\$" > .hgignore
$ hg status
A dir/b.o
? .hgignore
? a.c
? a.o
? dir/c.o (fsmonitor !)
? syntax
Check recursive glob pattern matches no directories (dir/**/c.o matches dir/c.o)
$ echo "syntax: glob" > .hgignore
$ echo "dir/**/c.o" >> .hgignore
$ touch dir/c.o
$ mkdir dir/subdir
$ touch dir/subdir/c.o
$ hg status
A dir/b.o
? .hgignore
? a.c
? a.o
? syntax
$ hg debugignore a.c
a.c is not ignored
$ hg debugignore dir/c.o
dir/c.o is ignored
(ignore rule in $TESTTMP/ignorerepo/.hgignore, line 2: 'dir/**/c.o') (glob)
Check using 'include:' in ignore file
$ hg purge --all --config extensions.purge=
$ touch foo.included
$ echo ".*.included" > otherignore
$ hg status -I "include:otherignore"
? foo.included
$ echo "include:otherignore" >> .hgignore
$ hg status
A dir/b.o
? .hgignore
? otherignore
Check recursive uses of 'include:'
$ echo "include:nested/ignore" >> otherignore
$ mkdir nested
$ echo "glob:*ignore" > nested/ignore
$ hg status
A dir/b.o
$ cp otherignore goodignore
$ echo "include:badignore" >> otherignore
$ hg status
skipping unreadable pattern file 'badignore': $ENOENT$
A dir/b.o
$ mv goodignore otherignore
Check using 'include:' while in a non-root directory
$ cd ..
$ hg -R ignorerepo status
A dir/b.o
$ cd ignorerepo
Check including subincludes
$ hg revert -q --all
$ hg purge --all --config extensions.purge=
$ echo ".hgignore" > .hgignore
$ mkdir dir1 dir2
$ touch dir1/file1 dir1/file2 dir2/file1 dir2/file2
$ echo "subinclude:dir2/.hgignore" >> .hgignore
$ echo "glob:file*2" > dir2/.hgignore
$ hg status
? dir1/file1
? dir1/file2
? dir2/file1
Check including subincludes with regexs
$ echo "subinclude:dir1/.hgignore" >> .hgignore
$ echo "regexp:f.le1" > dir1/.hgignore
$ hg status
? dir1/file2
? dir2/file1
Check multiple levels of sub-ignores
$ mkdir dir1/subdir
$ touch dir1/subdir/subfile1 dir1/subdir/subfile3 dir1/subdir/subfile4
$ echo "subinclude:subdir/.hgignore" >> dir1/.hgignore
$ echo "glob:subfil*3" >> dir1/subdir/.hgignore
$ hg status
? dir1/file2
? dir1/subdir/subfile4
? dir2/file1
Check include subignore at the same level
$ mv dir1/subdir/.hgignore dir1/.hgignoretwo
$ echo "regexp:f.le1" > dir1/.hgignore
$ echo "subinclude:.hgignoretwo" >> dir1/.hgignore
$ echo "glob:file*2" > dir1/.hgignoretwo
$ hg status | grep file2
[1]
$ hg debugignore dir1/file2
dir1/file2 is ignored
(ignore rule in dir2/.hgignore, line 1: 'file*2')
#if windows
Windows paths are accepted on input
$ rm dir1/.hgignore
$ echo "dir1/file*" >> .hgignore
$ hg debugignore "dir1\file2"
dir1\file2 is ignored
(ignore rule in $TESTTMP\ignorerepo\.hgignore, line 4: 'dir1/file*')
$ hg up -qC .
#endif