largefiles: use 'default' instead of 'default-push' when pulling (issue3584)
This only applies to downloading largefiles, and only when no source for the
pull is explicitly provided. The repository itself was properly being pulled
via 'default' previously.
Using --all-largefiles is not necessary on a bare pull to test this (this
existing test is merely a convenience), but it is required to test pulling on
the rebase path.
Note that the errors generated in the --rebase case are because the repo
specified doesn't have the largefiles in its cache (though they are in the user
cache), so the errors are misleading. Specifying --all-largefiles when cloning
to 'b' fixes this, but instead of errors, it reports caching only 5 largefiles
instead of the 9 that come up missing. Likely this is because the largefile
download procedure tries to download missing files for each rev, and some of the
files have standins in more than one rev that gets pulled.
This test tries to exercise the ssh functionality with a dummy script
creating 'remote' repo
$ hg init remote
$ cd remote
$ echo this > foo
$ echo this > fooO
$ hg ci -A -m "init" foo fooO
$ cat <<EOF > .hg/hgrc
> [server]
> uncompressed = True
>
> [hooks]
> changegroup = python "$TESTDIR/printenv.py" changegroup-in-remote 0 ../dummylog
> EOF
$ cd ..
repo not found error
$ hg clone -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/nonexistent local
remote: abort: there is no Mercurial repository here (.hg not found)!
abort: no suitable response from remote hg!
[255]
non-existent absolute path
$ hg clone -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy//`pwd`/nonexistent local
remote: abort: there is no Mercurial repository here (.hg not found)!
abort: no suitable response from remote hg!
[255]
clone remote via stream
$ hg clone -e "python \"$TESTDIR/dummyssh\"" --uncompressed ssh://user@dummy/remote local-stream
streaming all changes
4 files to transfer, 392 bytes of data
transferred 392 bytes in * seconds (*/sec) (glob)
updating to branch default
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd local-stream
$ hg verify
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
2 files, 1 changesets, 2 total revisions
$ cd ..
clone remote via pull
$ hg clone -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote local
requesting all changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 2 changes to 2 files
updating to branch default
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
verify
$ cd local
$ hg verify
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
2 files, 1 changesets, 2 total revisions
$ echo '[hooks]' >> .hg/hgrc
$ echo "changegroup = python \"$TESTDIR/printenv.py\" changegroup-in-local 0 ../dummylog" >> .hg/hgrc
empty default pull
$ hg paths
default = ssh://user@dummy/remote
$ hg pull -e "python \"$TESTDIR/dummyssh\""
pulling from ssh://user@dummy/remote
searching for changes
no changes found
local change
$ echo bleah > foo
$ hg ci -m "add"
updating rc
$ echo "default-push = ssh://user@dummy/remote" >> .hg/hgrc
$ echo "[ui]" >> .hg/hgrc
$ echo "ssh = python \"$TESTDIR/dummyssh\"" >> .hg/hgrc
find outgoing
$ hg out ssh://user@dummy/remote
comparing with ssh://user@dummy/remote
searching for changes
changeset: 1:a28a9d1a809c
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: add
find incoming on the remote side
$ hg incoming -R ../remote -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/local
comparing with ssh://user@dummy/local
searching for changes
changeset: 1:a28a9d1a809c
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: add
find incoming on the remote side (using absolute path)
$ hg incoming -R ../remote -e "python \"$TESTDIR/dummyssh\"" "ssh://user@dummy/`pwd`"
comparing with ssh://user@dummy/$TESTTMP/local
searching for changes
changeset: 1:a28a9d1a809c
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: add
push
$ hg push
pushing to ssh://user@dummy/remote
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 1 changes to 1 files
$ cd ../remote
check remote tip
$ hg tip
changeset: 1:a28a9d1a809c
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: add
$ hg verify
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
2 files, 2 changesets, 3 total revisions
$ hg cat -r tip foo
bleah
$ echo z > z
$ hg ci -A -m z z
created new head
test pushkeys and bookmarks
$ cd ../local
$ hg debugpushkey --config ui.ssh="python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote namespaces
bookmarks
phases
namespaces
$ hg book foo -r 0
$ hg out -B
comparing with ssh://user@dummy/remote
searching for changed bookmarks
foo 1160648e36ce
$ hg push -B foo
pushing to ssh://user@dummy/remote
searching for changes
no changes found
exporting bookmark foo
[1]
$ hg debugpushkey --config ui.ssh="python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote bookmarks
foo 1160648e36cec0054048a7edc4110c6f84fde594
$ hg book -f foo
$ hg push --traceback
pushing to ssh://user@dummy/remote
searching for changes
no changes found
updating bookmark foo
[1]
$ hg book -d foo
$ hg in -B
comparing with ssh://user@dummy/remote
searching for changed bookmarks
foo a28a9d1a809c
$ hg book -f -r 0 foo
$ hg pull -B foo
pulling from ssh://user@dummy/remote
no changes found
updating bookmark foo
importing bookmark foo
$ hg book -d foo
$ hg push -B foo
pushing to ssh://user@dummy/remote
searching for changes
no changes found
deleting remote bookmark foo
[1]
a bad, evil hook that prints to stdout
$ cat <<EOF > $TESTTMP/badhook
> import sys
> sys.stdout.write("KABOOM\n")
> EOF
$ echo '[hooks]' >> ../remote/.hg/hgrc
$ echo "changegroup.stdout = python $TESTTMP/badhook" >> ../remote/.hg/hgrc
$ echo r > r
$ hg ci -A -m z r
push should succeed even though it has an unexpected response
$ hg push
pushing to ssh://user@dummy/remote
searching for changes
note: unsynced remote changes!
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 1 changes to 1 files
remote: KABOOM
$ hg -R ../remote heads
changeset: 3:1383141674ec
tag: tip
parent: 1:a28a9d1a809c
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: z
changeset: 2:6c0482d977a3
parent: 0:1160648e36ce
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: z
clone bookmarks
$ hg -R ../remote bookmark test
$ hg -R ../remote bookmarks
* test 2:6c0482d977a3
$ hg clone -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote local-bookmarks
requesting all changes
adding changesets
adding manifests
adding file changes
added 4 changesets with 5 changes to 4 files (+1 heads)
updating to branch default
3 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg -R local-bookmarks bookmarks
test 2:6c0482d977a3
passwords in ssh urls are not supported
(we use a glob here because different Python versions give different
results here)
$ hg push ssh://user:erroneouspwd@dummy/remote
pushing to ssh://user:*@dummy/remote (glob)
abort: password in URL not supported!
[255]
$ cd ..
hide outer repo
$ hg init
Test remote paths with spaces (issue2983):
$ hg init --ssh "python \"$TESTDIR/dummyssh\"" "ssh://user@dummy/a repo"
$ touch "$TESTTMP/a repo/test"
$ hg -R 'a repo' commit -A -m "test"
adding test
$ hg -R 'a repo' tag tag
$ hg id --ssh "python \"$TESTDIR/dummyssh\"" "ssh://user@dummy/a repo"
73649e48688a
Test (non-)escaping of remote paths with spaces when cloning (issue3145):
$ hg clone --ssh "python \"$TESTDIR/dummyssh\"" "ssh://user@dummy/a repo"
destination directory: a repo
abort: destination 'a repo' is not empty
[255]
Test hg-ssh using a helper script that will restore PYTHONPATH (which might
have been cleared by a hg.exe wrapper) and invoke hg-ssh with the right
parameters:
$ cat > ssh.sh << EOF
> userhost="\$1"
> SSH_ORIGINAL_COMMAND="\$2"
> export SSH_ORIGINAL_COMMAND
> PYTHONPATH="$PYTHONPATH"
> export PYTHONPATH
> python "$TESTDIR/../contrib/hg-ssh" "$TESTTMP/a repo"
> EOF
$ hg id --ssh "sh ssh.sh" "ssh://user@dummy/a repo"
73649e48688a
$ hg id --ssh "sh ssh.sh" "ssh://user@dummy/a'repo"
remote: Illegal repository "$TESTTMP/a'repo" (glob)
abort: no suitable response from remote hg!
[255]
$ hg id --ssh "sh ssh.sh" --remotecmd hacking "ssh://user@dummy/a'repo"
remote: Illegal command "hacking -R 'a'\''repo' serve --stdio"
abort: no suitable response from remote hg!
[255]
$ SSH_ORIGINAL_COMMAND="'hg' -R 'a'repo' serve --stdio" python "$TESTDIR/../contrib/hg-ssh"
Illegal command "'hg' -R 'a'repo' serve --stdio": No closing quotation
[255]
Test hg-ssh in read-only mode:
$ cat > ssh.sh << EOF
> userhost="\$1"
> SSH_ORIGINAL_COMMAND="\$2"
> export SSH_ORIGINAL_COMMAND
> PYTHONPATH="$PYTHONPATH"
> export PYTHONPATH
> python "$TESTDIR/../contrib/hg-ssh" --read-only "$TESTTMP/remote"
> EOF
$ hg clone --ssh "sh ssh.sh" "ssh://user@dummy/$TESTTMP/remote" read-only-local
requesting all changes
adding changesets
adding manifests
adding file changes
added 4 changesets with 5 changes to 4 files (+1 heads)
updating to branch default
3 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd read-only-local
$ echo "baz" > bar
$ hg ci -A -m "unpushable commit" bar
$ hg push --ssh "sh ../ssh.sh"
pushing to ssh://user@dummy/*/remote (glob)
searching for changes
remote: Permission denied
remote: abort: prechangegroup.hg-ssh hook failed
remote: Permission denied
remote: abort: prepushkey.hg-ssh hook failed
abort: unexpected response: empty string
[255]
$ cd ..
$ cat dummylog
Got arguments 1:user@dummy 2:hg -R nonexistent serve --stdio
Got arguments 1:user@dummy 2:hg -R /$TESTTMP/nonexistent serve --stdio
Got arguments 1:user@dummy 2:hg -R remote serve --stdio
Got arguments 1:user@dummy 2:hg -R remote serve --stdio
Got arguments 1:user@dummy 2:hg -R remote serve --stdio
Got arguments 1:user@dummy 2:hg -R remote serve --stdio
Got arguments 1:user@dummy 2:hg -R local serve --stdio
Got arguments 1:user@dummy 2:hg -R $TESTTMP/local serve --stdio
Got arguments 1:user@dummy 2:hg -R remote serve --stdio
changegroup-in-remote hook: HG_NODE=a28a9d1a809cab7d4e2fde4bee738a9ede948b60 HG_SOURCE=serve HG_URL=remote:ssh:127.0.0.1
Got arguments 1:user@dummy 2:hg -R remote serve --stdio
Got arguments 1:user@dummy 2:hg -R remote serve --stdio
Got arguments 1:user@dummy 2:hg -R remote serve --stdio
Got arguments 1:user@dummy 2:hg -R remote serve --stdio
Got arguments 1:user@dummy 2:hg -R remote serve --stdio
Got arguments 1:user@dummy 2:hg -R remote serve --stdio
Got arguments 1:user@dummy 2:hg -R remote serve --stdio
Got arguments 1:user@dummy 2:hg -R remote serve --stdio
Got arguments 1:user@dummy 2:hg -R remote serve --stdio
changegroup-in-remote hook: HG_NODE=1383141674ec756a6056f6a9097618482fe0f4a6 HG_SOURCE=serve HG_URL=remote:ssh:127.0.0.1
Got arguments 1:user@dummy 2:hg -R remote serve --stdio
Got arguments 1:user@dummy 2:hg init 'a repo'
Got arguments 1:user@dummy 2:hg -R 'a repo' serve --stdio
Got arguments 1:user@dummy 2:hg -R 'a repo' serve --stdio
Got arguments 1:user@dummy 2:hg -R 'a repo' serve --stdio