view tests/test-convert-svn-move.t @ 25111:1ef96a3b8b89

summary: add a phase line (draft, secret) to the output

The number of draft and secret changesets are currently not summarized.
This is an important information because the number of drafts give some rough
idea of the number of outgoing changesets in typical workflows, without needing
to probe a remote repository. And a non-zero number of secrets means that
those changeset will not be pushed.

If the repository is "dirty" - some draft or secret changesets exists - then
summary will display a line like:

phases: X draft, Y secret (public)

The phase in parenthesis corresponds to the highest phase of the parents of
the working directory, i.e. the current phase.

By default, the line is not printed if the repository is "clean" - all
changesets are public - but if verbose is activated, it will display:

phases: (public)

On the other hand, nothing will be printed if quiet is in action.

A few tests have been added in test-phases.t to cover the -v and -q cases.

#require svn svn-bindings

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > convert =
  > EOF

  $ svnadmin create svn-repo
  $ svnadmin load -q svn-repo < "$TESTDIR/svn/move.svndump"
  $ SVNREPOPATH=`pwd`/svn-repo
#if windows
  $ SVNREPOURL=file:///`$PYTHON -c "import urllib, sys; sys.stdout.write(urllib.quote(sys.argv[1]))" "$SVNREPOPATH"`
#else
  $ SVNREPOURL=file://`$PYTHON -c "import urllib, sys; sys.stdout.write(urllib.quote(sys.argv[1]))" "$SVNREPOPATH"`
#endif

Convert trunk and branches

  $ hg convert --datesort "$SVNREPOURL"/subproject A-hg
  initializing destination A-hg repository
  scanning source...
  sorting...
  converting...
  13 createtrunk
  12 moved1
  11 moved1
  10 moved2
  9 changeb and rm d2
  8 changeb and rm d2
  7 moved1again
  6 moved1again
  5 copyfilefrompast
  4 copydirfrompast
  3 add d3
  2 copy dir and remove subdir
  1 add d4old
  0 rename d4old into d4new

  $ cd A-hg
  $ hg log -G --template '{rev} {desc|firstline} files: {files}\n'
  o  13 rename d4old into d4new files: d4new/g d4old/g
  |
  o  12 add d4old files: d4old/g
  |
  o  11 copy dir and remove subdir files: d3/d31/e d4/d31/e d4/f
  |
  o  10 add d3 files: d3/d31/e d3/f
  |
  o  9 copydirfrompast files: d2/d
  |
  o  8 copyfilefrompast files: d
  |
  o  7 moved1again files: d1/b d1/c
  |
  | o  6 moved1again files:
  | |
  o |  5 changeb and rm d2 files: d1/b d2/d
  | |
  | o  4 changeb and rm d2 files: b
  | |
  o |  3 moved2 files: d2/d
  | |
  o |  2 moved1 files: d1/b d1/c
  | |
  | o  1 moved1 files: b c
  |
  o  0 createtrunk files:
  

Check move copy records

  $ hg st --rev 12:13 --copies
  A d4new/g
    d4old/g
  R d4old/g

Check branches

  $ hg branches
  default                       13:* (glob)
  d1                             6:* (glob)
  $ cd ..

  $ mkdir test-replace
  $ cd test-replace
  $ svnadmin create svn-repo
  $ svnadmin load -q svn-repo < "$TESTDIR/svn/replace.svndump"

Convert files being replaced by directories

  $ hg convert svn-repo hg-repo
  initializing destination hg-repo repository
  scanning source...
  sorting...
  converting...
  6 initial
  5 clobber symlink
  4 clobber1
  3 clobber2
  2 adddb
  1 clobberdir
  0 branch

  $ cd hg-repo

Manifest before

  $ hg -v manifest -r 1
  644   a
  644   d/b
  644   d2/a
  644 @ dlink
  644 @ dlink2
  644   dlink3

Manifest after clobber1

  $ hg -v manifest -r 2
  644   a/b
  644   d/b
  644   d2/a
  644   dlink/b
  644 @ dlink2
  644   dlink3

Manifest after clobber2

  $ hg -v manifest -r 3
  644   a/b
  644   d/b
  644   d2/a
  644   dlink/b
  644 @ dlink2
  644 @ dlink3

Manifest after clobberdir

  $ hg -v manifest -r 6
  644   a/b
  644   d/b
  644   d2/a
  644   d2/c
  644   dlink/b
  644 @ dlink2
  644 @ dlink3

Try updating

  $ hg up -qC default
  $ cd ..

Test convert progress bar

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > progress =
  > [progress]
  > assume-tty = 1
  > delay = 0
  > changedelay = 0
  > format = topic bar number
  > refresh = 0
  > width = 60
  > EOF

  $ hg convert svn-repo hg-progress
  \r (no-eol) (esc)
  scanning [=====>                                      ] 1/7\r (no-eol) (esc)
  scanning [===========>                                ] 2/7\r (no-eol) (esc)
  scanning [=================>                          ] 3/7\r (no-eol) (esc)
  scanning [========================>                   ] 4/7\r (no-eol) (esc)
  scanning [==============================>             ] 5/7\r (no-eol) (esc)
  scanning [====================================>       ] 6/7\r (no-eol) (esc)
  scanning [===========================================>] 7/7\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [                                          ] 0/7\r (no-eol) (esc)
  getting files [=====>                                 ] 1/6\r (no-eol) (esc)
  getting files [============>                          ] 2/6\r (no-eol) (esc)
  getting files [==================>                    ] 3/6\r (no-eol) (esc)
  getting files [=========================>             ] 4/6\r (no-eol) (esc)
  getting files [===============================>       ] 5/6\r (no-eol) (esc)
  getting files [======================================>] 6/6\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [=====>                                    ] 1/7\r (no-eol) (esc)
  scanning paths [                                      ] 0/1\r (no-eol) (esc)
  getting files [======================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [===========>                              ] 2/7\r (no-eol) (esc)
  scanning paths [                                      ] 0/2\r (no-eol) (esc)
  scanning paths [==================>                   ] 1/2\r (no-eol) (esc)
  getting files [========>                              ] 1/4\r (no-eol) (esc)
  getting files [==================>                    ] 2/4\r (no-eol) (esc)
  getting files [============================>          ] 3/4\r (no-eol) (esc)
  getting files [======================================>] 4/4\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [=================>                        ] 3/7\r (no-eol) (esc)
  scanning paths [                                      ] 0/1\r (no-eol) (esc)
  getting files [======================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [=======================>                  ] 4/7\r (no-eol) (esc)
  scanning paths [                                      ] 0/1\r (no-eol) (esc)
  getting files [======================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [=============================>            ] 5/7\r (no-eol) (esc)
  scanning paths [                                      ] 0/1\r (no-eol) (esc)
  getting files [===>                                   ] 1/8\r (no-eol) (esc)
  getting files [========>                              ] 2/8\r (no-eol) (esc)
  getting files [=============>                         ] 3/8\r (no-eol) (esc)
  getting files [==================>                    ] 4/8\r (no-eol) (esc)
  getting files [=======================>               ] 5/8\r (no-eol) (esc)
  getting files [============================>          ] 6/8\r (no-eol) (esc)
  getting files [=================================>     ] 7/8\r (no-eol) (esc)
  getting files [======================================>] 8/8\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [===================================>      ] 6/7\r (no-eol) (esc)
  scanning paths [                                      ] 0/3\r (no-eol) (esc)
  scanning paths [===========>                          ] 1/3\r (no-eol) (esc)
  scanning paths [========================>             ] 2/3\r (no-eol) (esc)
  getting files [===>                                   ] 1/8\r (no-eol) (esc)
  getting files [========>                              ] 2/8\r (no-eol) (esc)
  getting files [=============>                         ] 3/8\r (no-eol) (esc)
  getting files [==================>                    ] 4/8\r (no-eol) (esc)
  getting files [=======================>               ] 5/8\r (no-eol) (esc)
  getting files [============================>          ] 6/8\r (no-eol) (esc)
  getting files [=================================>     ] 7/8\r (no-eol) (esc)
  getting files [======================================>] 8/8\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  initializing destination hg-progress repository
  scanning source...
  sorting...
  converting...
  6 initial
  5 clobber symlink
  4 clobber1
  3 clobber2
  2 adddb
  1 clobberdir
  0 branch

  $ cd ..