obsolete: explicitly track folds inside the markers
We now record information to be able to recognize "fold" event from
obsolescence markers. To do so, we track the following pieces of information:
a) a fold ID. Unique to that fold (per successor),
b) the number of predecessors,
c) the index of the predecessor in that fold.
We will now be able to create an algorithm able to find "predecessorssets".
We now store this data in the generic "metadata" field of the markers.
Updating the format to have a more compact storage for this would be useful.
This way of tracking a fold through multiple markers could be applied to split
too. This would have two advantages:
1) We get a simpler format, since number of successors is limited to [0-1].
2) We can better deal with situations where only some of the split successors
are pushed to a remote repository.
We should look into the relevance of such a change before updating the on-disk
format.
note: unlike splits, folds do not have to deal with cases where only some of
the markers have been synchronized. As they all share the same successor
changesets, they are all relevant to the same nodes.
$ hg init
$ cat << EOF > a
> Small Mathematical Series.
> One
> Two
> Three
> Four
> Five
> Hop we are done.
> EOF
$ hg add a
$ hg commit -m ancestor
$ cat << EOF > a
> Small Mathematical Series.
> 1
> 2
> 3
> 4
> 5
> Hop we are done.
> EOF
$ hg commit -m branch1
$ hg co 0
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cat << EOF > a
> Small Mathematical Series.
> 1
> 2
> 3
> 6
> 8
> Hop we are done.
> EOF
$ hg commit -m branch2
created new head
$ hg merge 1
merging a
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
0 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
[1]
$ hg id
618808747361+c0c68e4fe667+ tip
$ echo "[commands]" >> $HGRCPATH
$ echo "status.verbose=true" >> $HGRCPATH
$ hg status
M a
? a.orig
# The repository is in an unfinished *merge* state.
# Unresolved merge conflicts:
#
# a
#
# To mark files as resolved: hg resolve --mark FILE
# To continue: hg commit
# To abort: hg merge --abort
$ hg status -Tjson
[
{
"path": "a",
"status": "M"
},
{
"path": "a.orig",
"status": "?"
}
]
$ cat a
Small Mathematical Series.
1
2
3
<<<<<<< working copy: 618808747361 - test: branch2
6
8
=======
4
5
>>>>>>> merge rev: c0c68e4fe667 - test: branch1
Hop we are done.
$ hg status --config commands.status.verbose=0
M a
? a.orig
Verify custom conflict markers
$ hg up -q --clean .
$ cat <<EOF >> .hg/hgrc
> [ui]
> mergemarkertemplate = '{author} {rev}'
> EOF
$ hg merge 1
merging a
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
0 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
[1]
$ cat a
Small Mathematical Series.
1
2
3
<<<<<<< working copy: test 2
6
8
=======
4
5
>>>>>>> merge rev: test 1
Hop we are done.
Verify line splitting of custom conflict marker which causes multiple lines
$ hg up -q --clean .
$ cat >> .hg/hgrc <<EOF
> [ui]
> mergemarkertemplate={author} {rev}\nfoo\nbar\nbaz
> EOF
$ hg -q merge 1
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
[1]
$ cat a
Small Mathematical Series.
1
2
3
<<<<<<< working copy: test 2
6
8
=======
4
5
>>>>>>> merge rev: test 1
Hop we are done.
Verify line trimming of custom conflict marker using multi-byte characters
$ hg up -q --clean .
$ "$PYTHON" <<EOF
> fp = open('logfile', 'wb')
> fp.write(b'12345678901234567890123456789012345678901234567890' +
> b'1234567890') # there are 5 more columns for 80 columns
>
> # 2 x 4 = 8 columns, but 3 x 4 = 12 bytes
> fp.write(u'\u3042\u3044\u3046\u3048'.encode('utf-8'))
>
> fp.close()
> EOF
$ hg add logfile
$ hg --encoding utf-8 commit --logfile logfile
$ cat >> .hg/hgrc <<EOF
> [ui]
> mergemarkertemplate={desc|firstline}
> EOF
$ hg -q --encoding utf-8 merge 1
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
[1]
$ cat a
Small Mathematical Series.
1
2
3
<<<<<<< working copy: 1234567890123456789012345678901234567890123456789012345...
6
8
=======
4
5
>>>>>>> merge rev: branch1
Hop we are done.
Verify basic conflict markers
$ hg up -q --clean 2
$ printf "\n[ui]\nmergemarkers=basic\n" >> .hg/hgrc
$ hg merge 1
merging a
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
0 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
[1]
$ cat a
Small Mathematical Series.
1
2
3
<<<<<<< working copy
6
8
=======
4
5
>>>>>>> merge rev
Hop we are done.
internal:merge3
$ hg up -q --clean .
$ hg merge 1 --tool internal:merge3
merging a
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
0 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
[1]
$ cat a
Small Mathematical Series.
<<<<<<< working copy
1
2
3
6
8
||||||| base
One
Two
Three
Four
Five
=======
1
2
3
4
5
>>>>>>> merge rev
Hop we are done.
Add some unconflicting changes on each head, to make sure we really
are merging, unlike :local and :other
$ hg up -C
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
updated to "e0693e20f496: 123456789012345678901234567890123456789012345678901234567890????"
1 other heads for branch "default"
$ printf "\n\nEnd of file\n" >> a
$ hg ci -m "Add some stuff at the end"
$ hg up -r 1
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ printf "Start of file\n\n\n" > tmp
$ cat a >> tmp
$ mv tmp a
$ hg ci -m "Add some stuff at the beginning"
Now test :merge-other and :merge-local
$ hg merge
merging a
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
1 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
[1]
$ hg resolve --tool :merge-other a
merging a
(no more unresolved files)
$ cat a
Start of file
Small Mathematical Series.
1
2
3
6
8
Hop we are done.
End of file
$ hg up -C
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
updated to "18b51d585961: Add some stuff at the beginning"
1 other heads for branch "default"
$ hg merge --tool :merge-local
merging a
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ cat a
Start of file
Small Mathematical Series.
1
2
3
4
5
Hop we are done.
End of file