obsolete: explicitly track folds inside the markers
We now record information to be able to recognize "fold" event from
obsolescence markers. To do so, we track the following pieces of information:
a) a fold ID. Unique to that fold (per successor),
b) the number of predecessors,
c) the index of the predecessor in that fold.
We will now be able to create an algorithm able to find "predecessorssets".
We now store this data in the generic "metadata" field of the markers.
Updating the format to have a more compact storage for this would be useful.
This way of tracking a fold through multiple markers could be applied to split
too. This would have two advantages:
1) We get a simpler format, since number of successors is limited to [0-1].
2) We can better deal with situations where only some of the split successors
are pushed to a remote repository.
We should look into the relevance of such a change before updating the on-disk
format.
note: unlike splits, folds do not have to deal with cases where only some of
the markers have been synchronized. As they all share the same successor
changesets, they are all relevant to the same nodes.
$ hg init repo1
$ cd repo1
$ mkdir a b a/1 b/1 b/2
$ touch in_root a/in_a b/in_b a/1/in_a_1 b/1/in_b_1 b/2/in_b_2
hg status in repo root:
$ hg status
? a/1/in_a_1
? a/in_a
? b/1/in_b_1
? b/2/in_b_2
? b/in_b
? in_root
hg status . in repo root:
$ hg status .
? a/1/in_a_1
? a/in_a
? b/1/in_b_1
? b/2/in_b_2
? b/in_b
? in_root
$ hg status --cwd a
? a/1/in_a_1
? a/in_a
? b/1/in_b_1
? b/2/in_b_2
? b/in_b
? in_root
$ hg status --cwd a .
? 1/in_a_1
? in_a
$ hg status --cwd a ..
? 1/in_a_1
? in_a
? ../b/1/in_b_1
? ../b/2/in_b_2
? ../b/in_b
? ../in_root
$ hg status --cwd b
? a/1/in_a_1
? a/in_a
? b/1/in_b_1
? b/2/in_b_2
? b/in_b
? in_root
$ hg status --cwd b .
? 1/in_b_1
? 2/in_b_2
? in_b
$ hg status --cwd b ..
? ../a/1/in_a_1
? ../a/in_a
? 1/in_b_1
? 2/in_b_2
? in_b
? ../in_root
$ hg status --cwd a/1
? a/1/in_a_1
? a/in_a
? b/1/in_b_1
? b/2/in_b_2
? b/in_b
? in_root
$ hg status --cwd a/1 .
? in_a_1
$ hg status --cwd a/1 ..
? in_a_1
? ../in_a
$ hg status --cwd b/1
? a/1/in_a_1
? a/in_a
? b/1/in_b_1
? b/2/in_b_2
? b/in_b
? in_root
$ hg status --cwd b/1 .
? in_b_1
$ hg status --cwd b/1 ..
? in_b_1
? ../2/in_b_2
? ../in_b
$ hg status --cwd b/2
? a/1/in_a_1
? a/in_a
? b/1/in_b_1
? b/2/in_b_2
? b/in_b
? in_root
$ hg status --cwd b/2 .
? in_b_2
$ hg status --cwd b/2 ..
? ../1/in_b_1
? in_b_2
? ../in_b
combining patterns with root and patterns without a root works
$ hg st a/in_a re:.*b$
? a/in_a
? b/in_b
tweaking defaults works
$ hg status --cwd a --config ui.tweakdefaults=yes
? 1/in_a_1
? in_a
? ../b/1/in_b_1
? ../b/2/in_b_2
? ../b/in_b
? ../in_root
$ HGPLAIN=1 hg status --cwd a --config ui.tweakdefaults=yes
? a/1/in_a_1 (glob)
? a/in_a (glob)
? b/1/in_b_1 (glob)
? b/2/in_b_2 (glob)
? b/in_b (glob)
? in_root
$ HGPLAINEXCEPT=tweakdefaults hg status --cwd a --config ui.tweakdefaults=yes
? 1/in_a_1
? in_a
? ../b/1/in_b_1
? ../b/2/in_b_2
? ../b/in_b
? ../in_root (glob)
relative paths can be requested
$ cat >> $HGRCPATH <<EOF
> [commands]
> status.relative = True
> EOF
$ hg status --cwd a
? 1/in_a_1
? in_a
? ../b/1/in_b_1
? ../b/2/in_b_2
? ../b/in_b
? ../in_root
$ HGPLAIN=1 hg status --cwd a
? a/1/in_a_1 (glob)
? a/in_a (glob)
? b/1/in_b_1 (glob)
? b/2/in_b_2 (glob)
? b/in_b (glob)
? in_root
if relative paths are explicitly off, tweakdefaults doesn't change it
$ cat >> $HGRCPATH <<EOF
> [commands]
> status.relative = False
> EOF
$ hg status --cwd a --config ui.tweakdefaults=yes
? a/1/in_a_1
? a/in_a
? b/1/in_b_1
? b/2/in_b_2
? b/in_b
? in_root
$ cd ..
$ hg init repo2
$ cd repo2
$ touch modified removed deleted ignored
$ echo "^ignored$" > .hgignore
$ hg ci -A -m 'initial checkin'
adding .hgignore
adding deleted
adding modified
adding removed
$ touch modified added unknown ignored
$ hg add added
$ hg remove removed
$ rm deleted
hg status:
$ hg status
A added
R removed
! deleted
? unknown
hg status modified added removed deleted unknown never-existed ignored:
$ hg status modified added removed deleted unknown never-existed ignored
never-existed: * (glob)
A added
R removed
! deleted
? unknown
$ hg copy modified copied
hg status -C:
$ hg status -C
A added
A copied
modified
R removed
! deleted
? unknown
hg status -A:
$ hg status -A
A added
A copied
modified
R removed
! deleted
? unknown
I ignored
C .hgignore
C modified
$ hg status -A -T '{status} {path} {node|shortest}\n'
A added ffff
A copied ffff
R removed ffff
! deleted ffff
? unknown ffff
I ignored ffff
C .hgignore ffff
C modified ffff
$ hg status -A -Tjson
[
{
"path": "added",
"status": "A"
},
{
"path": "copied",
"source": "modified",
"status": "A"
},
{
"path": "removed",
"status": "R"
},
{
"path": "deleted",
"status": "!"
},
{
"path": "unknown",
"status": "?"
},
{
"path": "ignored",
"status": "I"
},
{
"path": ".hgignore",
"status": "C"
},
{
"path": "modified",
"status": "C"
}
]
$ hg status -A -Tpickle > pickle
>>> from __future__ import print_function
>>> import pickle
>>> print(sorted((x['status'], x['path']) for x in pickle.load(open("pickle"))))
[('!', 'deleted'), ('?', 'pickle'), ('?', 'unknown'), ('A', 'added'), ('A', 'copied'), ('C', '.hgignore'), ('C', 'modified'), ('I', 'ignored'), ('R', 'removed')]
$ rm pickle
$ echo "^ignoreddir$" > .hgignore
$ mkdir ignoreddir
$ touch ignoreddir/file
Test templater support:
$ hg status -AT "[{status}]\t{if(source, '{source} -> ')}{path}\n"
[M] .hgignore
[A] added
[A] modified -> copied
[R] removed
[!] deleted
[?] ignored
[?] unknown
[I] ignoreddir/file
[C] modified
$ hg status -AT default
M .hgignore
A added
A copied
modified
R removed
! deleted
? ignored
? unknown
I ignoreddir/file
C modified
$ hg status -T compact
abort: "status" not in template map
[255]
hg status ignoreddir/file:
$ hg status ignoreddir/file
hg status -i ignoreddir/file:
$ hg status -i ignoreddir/file
I ignoreddir/file
$ cd ..
Check 'status -q' and some combinations
$ hg init repo3
$ cd repo3
$ touch modified removed deleted ignored
$ echo "^ignored$" > .hgignore
$ hg commit -A -m 'initial checkin'
adding .hgignore
adding deleted
adding modified
adding removed
$ touch added unknown ignored
$ hg add added
$ echo "test" >> modified
$ hg remove removed
$ rm deleted
$ hg copy modified copied
Specify working directory revision explicitly, that should be the same as
"hg status"
$ hg status --change "wdir()"
M modified
A added
A copied
R removed
! deleted
? unknown
Run status with 2 different flags.
Check if result is the same or different.
If result is not as expected, raise error
$ assert() {
> hg status $1 > ../a
> hg status $2 > ../b
> if diff ../a ../b > /dev/null; then
> out=0
> else
> out=1
> fi
> if [ $3 -eq 0 ]; then
> df="same"
> else
> df="different"
> fi
> if [ $out -ne $3 ]; then
> echo "Error on $1 and $2, should be $df."
> fi
> }
Assert flag1 flag2 [0-same | 1-different]
$ assert "-q" "-mard" 0
$ assert "-A" "-marduicC" 0
$ assert "-qA" "-mardcC" 0
$ assert "-qAui" "-A" 0
$ assert "-qAu" "-marducC" 0
$ assert "-qAi" "-mardicC" 0
$ assert "-qu" "-u" 0
$ assert "-q" "-u" 1
$ assert "-m" "-a" 1
$ assert "-r" "-d" 1
$ cd ..
$ hg init repo4
$ cd repo4
$ touch modified removed deleted
$ hg ci -q -A -m 'initial checkin'
$ touch added unknown
$ hg add added
$ hg remove removed
$ rm deleted
$ echo x > modified
$ hg copy modified copied
$ hg ci -m 'test checkin' -d "1000001 0"
$ rm *
$ touch unrelated
$ hg ci -q -A -m 'unrelated checkin' -d "1000002 0"
hg status --change 1:
$ hg status --change 1
M modified
A added
A copied
R removed
hg status --change 1 unrelated:
$ hg status --change 1 unrelated
hg status -C --change 1 added modified copied removed deleted:
$ hg status -C --change 1 added modified copied removed deleted
M modified
A added
A copied
modified
R removed
hg status -A --change 1 and revset:
$ hg status -A --change '1|1'
M modified
A added
A copied
modified
R removed
C deleted
$ cd ..
hg status with --rev and reverted changes:
$ hg init reverted-changes-repo
$ cd reverted-changes-repo
$ echo a > file
$ hg add file
$ hg ci -m a
$ echo b > file
$ hg ci -m b
reverted file should appear clean
$ hg revert -r 0 .
reverting file
$ hg status -A --rev 0
C file
#if execbit
reverted file with changed flag should appear modified
$ chmod +x file
$ hg status -A --rev 0
M file
$ hg revert -r 0 .
reverting file
reverted and committed file with changed flag should appear modified
$ hg co -C .
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ chmod +x file
$ hg ci -m 'change flag'
$ hg status -A --rev 1 --rev 2
M file
$ hg diff -r 1 -r 2
#endif
$ cd ..
hg status of binary file starting with '\1\n', a separator for metadata:
$ hg init repo5
$ cd repo5
>>> open("010a", r"wb").write(b"\1\nfoo") and None
$ hg ci -q -A -m 'initial checkin'
$ hg status -A
C 010a
>>> open("010a", r"wb").write(b"\1\nbar") and None
$ hg status -A
M 010a
$ hg ci -q -m 'modify 010a'
$ hg status -A --rev 0:1
M 010a
$ touch empty
$ hg ci -q -A -m 'add another file'
$ hg status -A --rev 1:2 010a
C 010a
$ cd ..
test "hg status" with "directory pattern" which matches against files
only known on target revision.
$ hg init repo6
$ cd repo6
$ echo a > a.txt
$ hg add a.txt
$ hg commit -m '#0'
$ mkdir -p 1/2/3/4/5
$ echo b > 1/2/3/4/5/b.txt
$ hg add 1/2/3/4/5/b.txt
$ hg commit -m '#1'
$ hg update -C 0 > /dev/null
$ hg status -A
C a.txt
the directory matching against specified pattern should be removed,
because directory existence prevents 'dirstate.walk()' from showing
warning message about such pattern.
$ test ! -d 1
$ hg status -A --rev 1 1/2/3/4/5/b.txt
R 1/2/3/4/5/b.txt
$ hg status -A --rev 1 1/2/3/4/5
R 1/2/3/4/5/b.txt
$ hg status -A --rev 1 1/2/3
R 1/2/3/4/5/b.txt
$ hg status -A --rev 1 1
R 1/2/3/4/5/b.txt
$ hg status --config ui.formatdebug=True --rev 1 1
status = [
{*'path': '1/2/3/4/5/b.txt'*}, (glob)
]
#if windows
$ hg --config ui.slash=false status -A --rev 1 1
R 1\2\3\4\5\b.txt
#endif
$ cd ..
Status after move overwriting a file (issue4458)
=================================================
$ hg init issue4458
$ cd issue4458
$ echo a > a
$ echo b > b
$ hg commit -Am base
adding a
adding b
with --force
$ hg mv b --force a
$ hg st --copies
M a
b
R b
$ hg revert --all
reverting a
undeleting b
$ rm *.orig
without force
$ hg rm a
$ hg st --copies
R a
$ hg mv b a
$ hg st --copies
M a
b
R b
using ui.statuscopies setting
$ hg st --config ui.statuscopies=true
M a
b
R b
$ hg st --config ui.statuscopies=false
M a
R b
$ hg st --config ui.tweakdefaults=yes
M a
b
R b
using log status template (issue5155)
$ hg log -Tstatus -r 'wdir()' -C
changeset: 2147483647:ffffffffffff
parent: 0:8c55c58b4c0e
user: test
date: * (glob)
files:
M a
b
R b
Other "bug" highlight, the revision status does not report the copy information.
This is buggy behavior.
$ hg commit -m 'blah'
$ hg st --copies --change .
M a
R b
using log status template, the copy information is displayed correctly.
$ hg log -Tstatus -r. -C
changeset: 1:6685fde43d21
tag: tip
user: test
date: * (glob)
summary: blah
files:
M a
b
R b
$ cd ..