view tests/test-contrib-check-code.t @ 31695:2d11d278279a

ui: defer setting pager related properties until the pager has spawned

When --pager=on is given, dispatch.py spawns a pager before setting up color.
If the pager failed to launch, ui.pageractive was left set to True, so color
configured itself based on 'color.pagermode'.  A typical MSYS setting would be
'color.mode=auto, color.pagermode=ansi'.  In the failure case, this would print
a warning, disable the pager, and then print the raw ANSI codes to the terminal.

Care needs to be taken, because it appears that leaving ui.pageractive=True was
the only thing that prevented an attempt at running the pager again from inside
the command.  This results in a double warning message, so pager is simply
disabled on failure.

The ui config settings didn't need to be moved to fix this, but it seemed like
the right thing to do for consistency.

  $ cat > correct.py <<EOF
  > def toto(arg1, arg2):
  >     del arg2
  >     return (5 + 6, 9)
  > EOF
  $ cat > wrong.py <<EOF
  > def toto( arg1, arg2):
  >     del(arg2)
  >     return ( 5+6, 9)
  > EOF
  $ cat > quote.py <<EOF
  > # let's use quote in comments
  > (''' ( 4x5 )
  > but """\\''' and finally''',
  > """let's fool checkpatch""", '1+2',
  > '"""', 42+1, """and
  > ( 4-1 ) """, "( 1+1 )\" and ")
  > a, '\\\\\\\\', "\\\\\\" x-2", "c-1"
  > EOF
  $ cat > classstyle.py <<EOF
  > class newstyle_class(object):
  >     pass
  > 
  > class oldstyle_class:
  >     pass
  > 
  > class empty():
  >     pass
  > 
  > no_class = 1:
  >     pass
  > EOF
  $ check_code="$TESTDIR"/../contrib/check-code.py
  $ "$check_code" ./wrong.py ./correct.py ./quote.py ./classstyle.py
  ./wrong.py:1:
   > def toto( arg1, arg2):
   gratuitous whitespace in () or []
  ./wrong.py:2:
   >     del(arg2)
   Python keyword is not a function
  ./wrong.py:3:
   >     return ( 5+6, 9)
   gratuitous whitespace in () or []
   missing whitespace in expression
  ./quote.py:5:
   > '"""', 42+1, """and
   missing whitespace in expression
  ./classstyle.py:4:
   > class oldstyle_class:
   old-style class, use class foo(object)
  ./classstyle.py:7:
   > class empty():
   class foo() creates old style object, use class foo(object)
  [1]
  $ cat > python3-compat.py << EOF
  > foo <> bar
  > reduce(lambda a, b: a + b, [1, 2, 3, 4])
  > dict(key=value)
  > EOF
  $ "$check_code" python3-compat.py
  python3-compat.py:1:
   > foo <> bar
   <> operator is not available in Python 3+, use !=
  python3-compat.py:2:
   > reduce(lambda a, b: a + b, [1, 2, 3, 4])
   reduce is not available in Python 3+
  python3-compat.py:3:
   > dict(key=value)
   dict() is different in Py2 and 3 and is slower than {}
  [1]

  $ cat > foo.c <<EOF
  > void narf() {
  > 	strcpy(foo, bar);
  > 	// strcpy_s is okay, but this comment is not
  > 	strcpy_s(foo, bar);
  > }
  > EOF
  $ "$check_code" ./foo.c
  ./foo.c:2:
   > 	strcpy(foo, bar);
   don't use strcpy, use strlcpy or memcpy
  ./foo.c:3:
   > 	// strcpy_s is okay, but this comment is not
   don't use //-style comments
  [1]

  $ cat > is-op.py <<EOF
  > # is-operator comparing number or string literal
  > x = None
  > y = x is 'foo'
  > y = x is "foo"
  > y = x is 5346
  > y = x is -6
  > y = x is not 'foo'
  > y = x is not "foo"
  > y = x is not 5346
  > y = x is not -6
  > EOF

  $ "$check_code" ./is-op.py
  ./is-op.py:3:
   > y = x is 'foo'
   object comparison with literal
  ./is-op.py:4:
   > y = x is "foo"
   object comparison with literal
  ./is-op.py:5:
   > y = x is 5346
   object comparison with literal
  ./is-op.py:6:
   > y = x is -6
   object comparison with literal
  ./is-op.py:7:
   > y = x is not 'foo'
   object comparison with literal
  ./is-op.py:8:
   > y = x is not "foo"
   object comparison with literal
  ./is-op.py:9:
   > y = x is not 5346
   object comparison with literal
  ./is-op.py:10:
   > y = x is not -6
   object comparison with literal
  [1]

  $ cat > for-nolineno.py <<EOF
  > except:
  > EOF
  $ "$check_code" for-nolineno.py --nolineno
  for-nolineno.py:0:
   > except:
   naked except clause
  [1]

  $ cat > warning.t <<EOF
  >   $ function warnonly {
  >   > }
  >   $ diff -N aaa
  >   $ function onwarn {}
  > EOF
  $ "$check_code" warning.t
  $ "$check_code" --warn warning.t
  warning.t:1:
   >   $ function warnonly {
   warning: don't use 'function', use old style
  warning.t:3:
   >   $ diff -N aaa
   warning: don't use 'diff -N'
  warning.t:4:
   >   $ function onwarn {}
   warning: don't use 'function', use old style
  [1]
  $ cat > raise-format.py <<EOF
  > raise SomeException, message
  > # this next line is okay
  > raise SomeException(arg1, arg2)
  > EOF
  $ "$check_code" not-existing.py raise-format.py
  Skipping*not-existing.py* (glob)
  raise-format.py:1:
   > raise SomeException, message
   don't use old-style two-argument raise, use Exception(message)
  [1]

  $ cat > rst.py <<EOF
  > """problematic rst text
  > 
  > .. note::
  >     wrong
  > """
  > 
  > '''
  > 
  > .. note::
  > 
  >     valid
  > 
  > new text
  > 
  >     .. note::
  > 
  >         also valid
  > '''
  > 
  > """mixed
  > 
  > .. note::
  > 
  >   good
  > 
  >     .. note::
  >         plus bad
  > """
  > EOF
  $ $check_code -w rst.py
  rst.py:3:
   > .. note::
   warning: add two newlines after '.. note::'
  rst.py:26:
   >     .. note::
   warning: add two newlines after '.. note::'
  [1]

  $ cat > ./map-inside-gettext.py <<EOF
  > print _("map inside gettext %s" % v)
  > 
  > print _("concatenating " " by " " space %s" % v)
  > print _("concatenating " + " by " + " '+' %s" % v)
  > 
  > print _("mapping operation in different line %s"
  >         % v)
  > 
  > print _(
  >         "leading spaces inside of '(' %s" % v)
  > EOF
  $ "$check_code" ./map-inside-gettext.py
  ./map-inside-gettext.py:1:
   > print _("map inside gettext %s" % v)
   don't use % inside _()
  ./map-inside-gettext.py:3:
   > print _("concatenating " " by " " space %s" % v)
   don't use % inside _()
  ./map-inside-gettext.py:4:
   > print _("concatenating " + " by " + " '+' %s" % v)
   don't use % inside _()
  ./map-inside-gettext.py:6:
   > print _("mapping operation in different line %s"
   don't use % inside _()
  ./map-inside-gettext.py:9:
   > print _(
   don't use % inside _()
  [1]

web templates

  $ mkdir -p mercurial/templates
  $ cat > mercurial/templates/example.tmpl <<EOF
  > {desc}
  > {desc|escape}
  > {desc|firstline}
  > {desc|websub}
  > EOF

  $ "$check_code" --warnings mercurial/templates/example.tmpl
  mercurial/templates/example.tmpl:2:
   > {desc|escape}
   warning: follow desc keyword with either firstline or websub
  [1]

'string join across lines with no space' detection

  $ cat > stringjoin.py <<EOF
  > foo = (' foo'
  >        'bar foo.'
  >        'bar foo:'
  >        'bar foo@'
  >        'bar foo%'
  >        'bar foo*'
  >        'bar foo+'
  >        'bar foo-'
  >        'bar')
  > EOF

'missing _() in ui message' detection

  $ cat > uigettext.py <<EOF
  > ui.status("% 10s %05d % -3.2f %*s %%"
  >           # this use '\\\\' instead of '\\', because the latter in
  >           # heredoc on shell becomes just '\'
  >           '\\\\ \n \t \0'
  >           """12345
  >           """
  >           '''.:*+-=
  >           ''' "%-6d \n 123456 .:*+-= foobar")
  > EOF

(Checking multiple invalid files at once examines whether caching
translation table for repquote() works as expected or not. All files
should break rules depending on result of repquote(), in this case)

  $ "$check_code" stringjoin.py uigettext.py
  stringjoin.py:1:
   > foo = (' foo'
   string join across lines with no space
  stringjoin.py:2:
   >        'bar foo.'
   string join across lines with no space
  stringjoin.py:3:
   >        'bar foo:'
   string join across lines with no space
  stringjoin.py:4:
   >        'bar foo@'
   string join across lines with no space
  stringjoin.py:5:
   >        'bar foo%'
   string join across lines with no space
  stringjoin.py:6:
   >        'bar foo*'
   string join across lines with no space
  stringjoin.py:7:
   >        'bar foo+'
   string join across lines with no space
  stringjoin.py:8:
   >        'bar foo-'
   string join across lines with no space
  uigettext.py:1:
   > ui.status("% 10s %05d % -3.2f %*s %%"
   missing _() in ui message (use () to hide false-positives)
  [1]