snapshot: introduce an intermediate `_refinedgroups` generator
This method will be used to improve the search for a good snapshot base. To
keep things simpler, we introduce the necessary function before doing any
delta base logic change. The next handful of commits will focus on refactoring
the code to let that new logic land as clearly as possible.
# General Idea
Right now, the search for a good delta base stop whenever we found a good one.
However, when using sparse-revlog, we should probably try a bit harder.
We do significant effort to increase delta re-use by jumping on "unrelated"
delta chains that provide better results. Moving to another chain for a better
result is good, but we have no guarantee we jump at a reasonable point in that
new chain. When we consider over the chains related to the parents, we start
from the higher-level snapshots. This is a way to consider the snapshot closer
to the current revision that has the best chance to produce a small delta. We
do benefit from this walk order when jumping to a better "unrelated" stack.
To counter-balance this, we'll introduce a way to "refine" the result. After a
good delta have been found, we'll keep searching for a better delta, using the
current best one as a starting point.
# Target Setup
The `finddeltainfo` method is responsible for the general search for a good
delta. It requests candidates base from `_candidategroups` and decides which
one are usable.
The `_candidategroups` generator act as a top-level filter, it does not care
about how we pick candidates, it just does basic filtering, excluding
revisions that have been tested already or that are an obvious misfit.
The `_rawgroups` generator is the one with the actual ancestors walking logic,
It does not care about what would do a good delta and what was already tested,
it just issues the initial candidates.
We introduce a new `_refinedgroup` function to bridge the gap between
`_candidategroups` and `_rawgroups`. It delegates the initial iteration logic
and then performing relevant refining of the valid base once found. (This
logic is yet to be added to function)
All these logics are fairly independent and easier to understand when standing
alone, not mixed with each other. It also makes it easy to test and try
different approaches for one of those four layers without affecting the other
ones.
# Technical details
To communicate `finddeltainfo` choice of "current best delta base" to the
`_refinegroup` logic, we plan to use python co-routine feature. The
`_candidategroups` and `_refinegroup` generators will become co-routine. This
will allow `_refinegroup` to detect when a good delta have been found and
triggers various refining steps.
For now, `_candidategroups` will just pass the value down the stack.
After poking at various option, the co-routine appears the best to keep each
layers focus on its duty, without the need to spread implementation details
across layers.
Test the EOL hook
$ hg init main
$ cat > main/.hg/hgrc <<EOF
> [hooks]
> pretxnchangegroup = python:hgext.eol.hook
> EOF
$ hg clone main fork
updating to branch default
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd fork
Create repo
$ cat > .hgeol <<EOF
> [patterns]
> mixed.txt = BIN
> crlf.txt = CRLF
> **.txt = native
> EOF
$ hg add .hgeol
$ hg commit -m 'Commit .hgeol'
$ printf "first\nsecond\nthird\n" > a.txt
$ hg add a.txt
$ hg commit -m 'LF a.txt'
$ hg push ../main
pushing to ../main
searching for changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 2 files
$ printf "first\r\nsecond\r\nthird\n" > a.txt
$ hg commit -m 'CRLF a.txt'
$ hg push ../main
pushing to ../main
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
error: pretxnchangegroup hook failed: end-of-line check failed:
a.txt in a8ee6548cd86 should not have CRLF line endings
transaction abort!
rollback completed
abort: end-of-line check failed:
a.txt in a8ee6548cd86 should not have CRLF line endings
[255]
$ printf "first\nsecond\nthird\n" > a.txt
$ hg commit -m 'LF a.txt (fixed)'
$ hg push ../main
pushing to ../main
searching for changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 1 files
$ printf "first\nsecond\nthird\n" > crlf.txt
$ hg add crlf.txt
$ hg commit -m 'LF crlf.txt'
$ hg push ../main
pushing to ../main
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
error: pretxnchangegroup hook failed: end-of-line check failed:
crlf.txt in 004ba2132725 should not have LF line endings
transaction abort!
rollback completed
abort: end-of-line check failed:
crlf.txt in 004ba2132725 should not have LF line endings
[255]
$ printf "first\r\nsecond\r\nthird\r\n" > crlf.txt
$ hg commit -m 'CRLF crlf.txt (fixed)'
$ hg push ../main
pushing to ../main
searching for changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 1 files
$ printf "first\r\nsecond" > b.txt
$ hg add b.txt
$ hg commit -m 'CRLF b.txt'
$ hg push ../main
pushing to ../main
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
error: pretxnchangegroup hook failed: end-of-line check failed:
b.txt in fbcf9b1025f5 should not have CRLF line endings
transaction abort!
rollback completed
abort: end-of-line check failed:
b.txt in fbcf9b1025f5 should not have CRLF line endings
[255]
$ hg up -r -2
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ printf "some\nother\nfile" > c.txt
$ hg add c.txt
$ hg commit -m "LF c.txt, b.txt doesn't exist here"
created new head
$ hg push -f ../main
pushing to ../main
searching for changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 2 files (+1 heads)
error: pretxnchangegroup hook failed: end-of-line check failed:
b.txt in fbcf9b1025f5 should not have CRLF line endings
transaction abort!
rollback completed
abort: end-of-line check failed:
b.txt in fbcf9b1025f5 should not have CRLF line endings
[255]
Test checkheadshook alias
$ cat > ../main/.hg/hgrc <<EOF
> [hooks]
> pretxnchangegroup = python:hgext.eol.checkheadshook
> EOF
$ hg push -f ../main
pushing to ../main
searching for changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 2 files (+1 heads)
error: pretxnchangegroup hook failed: end-of-line check failed:
b.txt in fbcf9b1025f5 should not have CRLF line endings
transaction abort!
rollback completed
abort: end-of-line check failed:
b.txt in fbcf9b1025f5 should not have CRLF line endings
[255]
We can fix the head and push again
$ hg up 6
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ printf "first\nsecond" > b.txt
$ hg ci -m "remove CRLF from b.txt"
$ hg push -f ../main
pushing to ../main
searching for changes
adding changesets
adding manifests
adding file changes
added 3 changesets with 3 changes to 2 files (+1 heads)
$ hg -R ../main rollback
repository tip rolled back to revision 5 (undo push)
Test it still fails with checkallhook
$ cat > ../main/.hg/hgrc <<EOF
> [hooks]
> pretxnchangegroup = python:hgext.eol.checkallhook
> EOF
$ hg push -f ../main
pushing to ../main
searching for changes
adding changesets
adding manifests
adding file changes
added 3 changesets with 3 changes to 2 files (+1 heads)
error: pretxnchangegroup hook failed: end-of-line check failed:
b.txt in fbcf9b1025f5 should not have CRLF line endings
transaction abort!
rollback completed
abort: end-of-line check failed:
b.txt in fbcf9b1025f5 should not have CRLF line endings
[255]
But we can push the clean head
$ hg push -r7 -f ../main
pushing to ../main
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
Test multiple files/revisions output
$ printf "another\r\nbad\r\none" > d.txt
$ hg add d.txt
$ hg ci -m "add d.txt"
$ hg push -f ../main
pushing to ../main
searching for changes
adding changesets
adding manifests
adding file changes
added 3 changesets with 3 changes to 2 files (+1 heads)
error: pretxnchangegroup hook failed: end-of-line check failed:
b.txt in fbcf9b1025f5 should not have CRLF line endings
d.txt in a7040e68714f should not have CRLF line endings
transaction abort!
rollback completed
abort: end-of-line check failed:
b.txt in fbcf9b1025f5 should not have CRLF line endings
d.txt in a7040e68714f should not have CRLF line endings
[255]
$ cd ..