tests/test-largefiles-cache.t

largefiles: don't interfere with logging normal files

The previous code was adding standin files to the matcher's file list when
neither the standin file nor the original existed in the context.  Somehow, this
was confusing the logging code into behaving differently from when the extension
wasn't loaded.

It seems that this was an attempt to support naming a directory that only
contains largefiles, as a test fails if the else clause is dropped entirely.
Therefore, only append the "standin" if it is a directory.  This was found by
running the test suite with --config extensions.largefiles=.

The first added test used to log an additional cset that wasn't logged normally.
The only relation it had to file 'a' is that 'a' was the source of a move, but
it isn't clear why having '.hglf/a' in the list causes this change:

    @@ -47,6 +47,11 @@

     Make sure largefiles doesn't interfere with logging a regular file
       $ hg log a --config extensions.largefiles=
    +  changeset:   3:2ca5ba701980
    +  user:        test
    +  date:        Thu Jan 01 00:00:04 1970 +0000
    +  summary:     d
    +
       changeset:   0:9161b9aeaf16
       user:        test
       date:        Thu Jan 01 00:00:01 1970 +0000

The second added test used to complain about a file not being in the parent
revision:

    @@ -1638,10 +1643,8 @@

     Ensure that largefiles doesn't intefere with following a normal file
       $ hg  --config extensions.largefiles= log -f d -T '{desc}' -G
    -  @  c
    -  |
    -  o  a
    -
    +  abort: cannot follow file not in parent revision: ".hglf/d"
    +  [255]
       $ hg log -f d/a -T '{desc}' -G
       @  c
       |

Note that there is still something fishy with the largefiles code, because when
using a glob pattern like this:

    $ hg log 'glob:sub/*'

the pattern list would contain '.hglf/glob:sub/*'.  None of the tests show this
(this test lives in test-largefiles.t at 1349), it was just something that I
noticed when the code was loaded up with print statements.

Create user cache directory

  $ USERCACHE=`pwd`/cache; export USERCACHE
  $ cat <<EOF >> ${HGRCPATH}
  > [extensions]
  > hgext.largefiles=
  > [largefiles]
  > usercache=${USERCACHE}
  > EOF
  $ mkdir -p ${USERCACHE}

Create source repo, and commit adding largefile.

  $ hg init src
  $ cd src
  $ echo large > large
  $ hg add --large large
  $ hg commit -m 'add largefile'
  $ hg rm large
  $ hg commit -m 'branchhead without largefile'
  $ hg up -qr 0
  $ cd ..

Discard all cached largefiles in USERCACHE

  $ rm -rf ${USERCACHE}

Create mirror repo, and pull from source without largefile:
"pull" is used instead of "clone" for suppression of (1) updating to
tip (= caching largefile from source repo), and (2) recording source
repo as "default" path in .hg/hgrc.

  $ hg init mirror
  $ cd mirror
  $ hg pull ../src
  pulling from ../src
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 1 changes to 1 files
  (run 'hg update' to get a working copy)

Update working directory to "tip", which requires largefile("large"),
but there is no cache file for it.  So, hg must treat it as
"missing"(!) file.

  $ hg update -r0
  getting changed largefiles
  large: largefile 7f7097b041ccf68cc5561e9600da4655d21c6d18 not available from file:/*/$TESTTMP/mirror (glob)
  0 largefiles updated, 0 removed
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg status
  ! large

Update working directory to null: this cleanup .hg/largefiles/dirstate

  $ hg update null
  getting changed largefiles
  0 largefiles updated, 0 removed
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved

Update working directory to tip, again.

  $ hg update -r0
  getting changed largefiles
  large: largefile 7f7097b041ccf68cc5561e9600da4655d21c6d18 not available from file:/*/$TESTTMP/mirror (glob)
  0 largefiles updated, 0 removed
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg status
  ! large
  $ cd ..

Verify that largefiles from pulled branchheads are fetched, also to an empty repo

  $ hg init mirror2
  $ hg -R mirror2 pull src -r0
  pulling from src
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  (run 'hg update' to get a working copy)

#if unix-permissions

Portable way to print file permissions:

  $ cat > ls-l.py <<EOF
  > #!/usr/bin/env python
  > import sys, os
  > path = sys.argv[1]
  > print '%03o' % (os.lstat(path).st_mode & 0777)
  > EOF
  $ chmod +x ls-l.py

Test that files in .hg/largefiles inherit mode from .hg/store, not
from file in working copy:

  $ cd src
  $ chmod 750 .hg/store
  $ chmod 660 large
  $ echo change >> large
  $ hg commit -m change
  created new head
  $ ../ls-l.py .hg/largefiles/e151b474069de4ca6898f67ce2f2a7263adf8fea
  640

Test permission of with files in .hg/largefiles created by update:

  $ cd ../mirror
  $ rm -r "$USERCACHE" .hg/largefiles # avoid links
  $ chmod 750 .hg/store
  $ hg pull ../src --update -q
  $ ../ls-l.py .hg/largefiles/e151b474069de4ca6898f67ce2f2a7263adf8fea
  640

Test permission of files created by push:

  $ hg serve -R ../src -d -p $HGPORT --pid-file hg.pid \
  >          --config "web.allow_push=*" --config web.push_ssl=no
  $ cat hg.pid >> $DAEMON_PIDS

  $ echo change >> large
  $ hg commit -m change

  $ rm -r "$USERCACHE"

  $ hg push -q http://localhost:$HGPORT/

  $ ../ls-l.py ../src/.hg/largefiles/b734e14a0971e370408ab9bce8d56d8485e368a9
  640

  $ cd ..

#endif

Test issue 4053 (remove --after on a deleted, uncommitted file shouldn't say
it is missing, but a remove on a nonexistant unknown file still should.  Same
for a forget.)

  $ cd src
  $ touch x
  $ hg add x
  $ mv x y
  $ hg remove -A x y ENOENT
  ENOENT: * (glob)
  not removing y: file is untracked
  [1]
  $ hg add y
  $ mv y z
  $ hg forget y z ENOENT
  ENOENT: * (glob)
  not removing z: file is already untracked
  [1]