view tests/test-automv.t @ 30441:3633403888ae

bdiff: give slight preference to appending lines

[This change could be folded into the previous changeset to minimize the repo
churn ...]

The general preference to matches in the middle of bdiff ranges helps getting
balanced recursion and efficient computation. But, as previous changes have
shown, it might also give diffs that seems "obviously wrong".

To mitigate that: If the best match on the A side starts at the beginning of
the bdiff range, don't aim for the middle-most B side match but for the
earliest.

This will make the matches balanced (by both sides being "early") even though
the bisection will be less balanced. Still, this case only apply if the *best*
and middle-most match was fully unbalanced on the A side. Each recursion will
thus even in this worst case reduce the problem significantly and we are not
re-introducing the problem that was fixed in f1ca249696ed.

The bundle size for 4.0 (hg bundle --base null -r 4.0 x.hg) happens to go from
22806817 to 22807275 bytes - a 0.002% increase.

This make the recent test-bdiff.py changes give a more pretty output ... but
they no longer show that the recursion is around middle matches (because it in
these cases isn't).

Tests for the automv extension; detect moved files at commit time.

  $ cat >> $HGRCPATH << EOF
  > [extensions]
  > automv=
  > rebase=
  > EOF

Setup repo

  $ hg init repo
  $ cd repo

Test automv command for commit

  $ printf 'foo\nbar\nbaz\n' > a.txt
  $ hg add a.txt
  $ hg commit -m 'init repo with a'

mv/rm/add
  $ mv a.txt b.txt
  $ hg rm a.txt
  $ hg add b.txt
  $ hg status -C
  A b.txt
  R a.txt
  $ hg commit -m 'msg'
  detected move of 1 files
  $ hg status --change . -C
  A b.txt
    a.txt
  R a.txt
  $ hg up -r 0
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved

mv/rm/add/modif
  $ mv a.txt b.txt
  $ hg rm a.txt
  $ hg add b.txt
  $ printf '\n' >> b.txt
  $ hg status -C
  A b.txt
  R a.txt
  $ hg commit -m 'msg'
  detected move of 1 files
  created new head
  $ hg status --change . -C
  A b.txt
    a.txt
  R a.txt
  $ hg up -r 0
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved

mv/rm/add/modif
  $ mv a.txt b.txt
  $ hg rm a.txt
  $ hg add b.txt
  $ printf '\nfoo\n' >> b.txt
  $ hg status -C
  A b.txt
  R a.txt
  $ hg commit -m 'msg'
  created new head
  $ hg status --change . -C
  A b.txt
  R a.txt
  $ hg up -r 0
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved

mv/rm/add/modif/changethreshold
  $ mv a.txt b.txt
  $ hg rm a.txt
  $ hg add b.txt
  $ printf '\nfoo\n' >> b.txt
  $ hg status -C
  A b.txt
  R a.txt
  $ hg commit --config automv.similarity='60' -m 'msg'
  detected move of 1 files
  created new head
  $ hg status --change . -C
  A b.txt
    a.txt
  R a.txt
  $ hg up -r 0
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved

mv
  $ mv a.txt b.txt
  $ hg status -C
  ! a.txt
  ? b.txt
  $ hg commit -m 'msg'
  nothing changed (1 missing files, see 'hg status')
  [1]
  $ hg status -C
  ! a.txt
  ? b.txt
  $ hg revert -aqC
  $ rm b.txt

mv/rm/add/notincommitfiles
  $ mv a.txt b.txt
  $ hg rm a.txt
  $ hg add b.txt
  $ echo 'bar' > c.txt
  $ hg add c.txt
  $ hg status -C
  A b.txt
  A c.txt
  R a.txt
  $ hg commit c.txt -m 'msg'
  created new head
  $ hg status --change . -C
  A c.txt
  $ hg status -C
  A b.txt
  R a.txt
  $ hg up -r 0
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg rm a.txt
  $ echo 'bar' > c.txt
  $ hg add c.txt
  $ hg commit -m 'msg'
  detected move of 1 files
  created new head
  $ hg status --change . -C
  A b.txt
    a.txt
  A c.txt
  R a.txt
  $ hg up -r 0
  1 files updated, 0 files merged, 2 files removed, 0 files unresolved

mv/rm/add/--no-automv
  $ mv a.txt b.txt
  $ hg rm a.txt
  $ hg add b.txt
  $ hg status -C
  A b.txt
  R a.txt
  $ hg commit --no-automv -m 'msg'
  created new head
  $ hg status --change . -C
  A b.txt
  R a.txt
  $ hg up -r 0
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved

Test automv command for commit --amend

mv/rm/add
  $ echo 'c' > c.txt
  $ hg add c.txt
  $ hg commit -m 'revision to amend to'
  created new head
  $ mv a.txt b.txt
  $ hg rm a.txt
  $ hg add b.txt
  $ hg status -C
  A b.txt
  R a.txt
  $ hg commit --amend -m 'amended'
  detected move of 1 files
  saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend-backup.hg (glob)
  $ hg status --change . -C
  A b.txt
    a.txt
  A c.txt
  R a.txt
  $ hg up -r 0
  1 files updated, 0 files merged, 2 files removed, 0 files unresolved

mv/rm/add/modif
  $ echo 'c' > c.txt
  $ hg add c.txt
  $ hg commit -m 'revision to amend to'
  created new head
  $ mv a.txt b.txt
  $ hg rm a.txt
  $ hg add b.txt
  $ printf '\n' >> b.txt
  $ hg status -C
  A b.txt
  R a.txt
  $ hg commit --amend -m 'amended'
  detected move of 1 files
  saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend-backup.hg (glob)
  $ hg status --change . -C
  A b.txt
    a.txt
  A c.txt
  R a.txt
  $ hg up -r 0
  1 files updated, 0 files merged, 2 files removed, 0 files unresolved

mv/rm/add/modif
  $ echo 'c' > c.txt
  $ hg add c.txt
  $ hg commit -m 'revision to amend to'
  created new head
  $ mv a.txt b.txt
  $ hg rm a.txt
  $ hg add b.txt
  $ printf '\nfoo\n' >> b.txt
  $ hg status -C
  A b.txt
  R a.txt
  $ hg commit --amend -m 'amended'
  saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend-backup.hg (glob)
  $ hg status --change . -C
  A b.txt
  A c.txt
  R a.txt
  $ hg up -r 0
  1 files updated, 0 files merged, 2 files removed, 0 files unresolved

mv/rm/add/modif/changethreshold
  $ echo 'c' > c.txt
  $ hg add c.txt
  $ hg commit -m 'revision to amend to'
  created new head
  $ mv a.txt b.txt
  $ hg rm a.txt
  $ hg add b.txt
  $ printf '\nfoo\n' >> b.txt
  $ hg status -C
  A b.txt
  R a.txt
  $ hg commit --amend --config automv.similarity='60' -m 'amended'
  detected move of 1 files
  saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend-backup.hg (glob)
  $ hg status --change . -C
  A b.txt
    a.txt
  A c.txt
  R a.txt
  $ hg up -r 0
  1 files updated, 0 files merged, 2 files removed, 0 files unresolved

mv
  $ echo 'c' > c.txt
  $ hg add c.txt
  $ hg commit -m 'revision to amend to'
  created new head
  $ mv a.txt b.txt
  $ hg status -C
  ! a.txt
  ? b.txt
  $ hg commit --amend -m 'amended'
  saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend-backup.hg (glob)
  $ hg status -C
  ! a.txt
  ? b.txt
  $ hg up -Cr 0
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved

mv/rm/add/notincommitfiles
  $ echo 'c' > c.txt
  $ hg add c.txt
  $ hg commit -m 'revision to amend to'
  created new head
  $ mv a.txt b.txt
  $ hg rm a.txt
  $ hg add b.txt
  $ echo 'bar' > d.txt
  $ hg add d.txt
  $ hg status -C
  A b.txt
  A d.txt
  R a.txt
  $ hg commit --amend -m 'amended' d.txt
  saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend-backup.hg (glob)
  $ hg status --change . -C
  A c.txt
  A d.txt
  $ hg status -C
  A b.txt
  R a.txt
  $ hg commit --amend -m 'amended'
  detected move of 1 files
  saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend-backup.hg (glob)
  $ hg status --change . -C
  A b.txt
    a.txt
  A c.txt
  A d.txt
  R a.txt
  $ hg up -r 0
  1 files updated, 0 files merged, 3 files removed, 0 files unresolved

mv/rm/add/--no-automv
  $ echo 'c' > c.txt
  $ hg add c.txt
  $ hg commit -m 'revision to amend to'
  created new head
  $ mv a.txt b.txt
  $ hg rm a.txt
  $ hg add b.txt
  $ hg status -C
  A b.txt
  R a.txt
  $ hg commit --amend -m 'amended' --no-automv
  saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend-backup.hg (glob)
  $ hg status --change . -C
  A b.txt
  A c.txt
  R a.txt
  $ hg up -r 0
  1 files updated, 0 files merged, 2 files removed, 0 files unresolved

mv/rm/commit/add/amend
  $ echo 'c' > c.txt
  $ hg add c.txt
  $ hg commit -m 'revision to amend to'
  created new head
  $ mv a.txt b.txt
  $ hg rm a.txt
  $ hg status -C
  R a.txt
  ? b.txt
  $ hg commit -m "removed a"
  $ hg add b.txt
  $ hg commit --amend -m 'amended'
  saved backup bundle to $TESTTMP/repo/.hg/strip-backup/*-amend-backup.hg (glob)
  $ hg status --change . -C
  A b.txt
  R a.txt

error conditions

  $ cat >> $HGRCPATH << EOF
  > [automv]
  > similarity=110
  > EOF
  $ hg commit -m 'revision to amend to'
  abort: automv.similarity must be between 0 and 100
  [255]