view tests/test-exchange-obsmarkers-case-B2.t @ 35023:3649c3f2cd90

revert: do not reverse hunks in interactive when REV is not parent (issue5096)

And introduce a new "apply" operation verb for this case as suggested in
issue5096. This replaces the no longer used "revert" operation.

In interactive revert, when reverting to something else that the parent
revision, display an "apply this change" message with a diff that is not
reversed.

The rationale is that `hg revert -i -r REV` will show hunks of the diff from
the working directory to REV and prompt the user to select them for applying
(to working directory). This contradicts dcc56e10c23b in which it was
decided to have the "direction" of prompted hunks reversed. Later on
[1], there was a broad consensus (but no decision) towards the "as to
be applied direction". Now that --interactive is no longer experimental
(5910db5d1913), it's time to switch and thus we drop no longer used
"experimental.revertalternateinteractivemode" configuration option.

[1]: https://www.mercurial-scm.org/pipermail/mercurial-devel/2016-November/090142.html


.. feature::

  When interactive revert is run against a revision other than the working
  directory parent, the diff shown is the diff to *apply* to the working directory,
  rather than the diff to *discard* from the working copy. This is in line with
  related user experiences with `git` and appears to be less confusing with
  `ui.interface=curses`.

============================================
Testing obsolescence markers push: Cases B.2
============================================

Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).

This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.

Category B: pruning case
TestCase 2: Prune on targeted common changeset
Variants:
# a: explicite push
# b: bare push

B.2 Pruned changeset on head: nothing pushed
============================================

.. {{{
..     ⊗ A
..     |
..     ● O
.. }}}
..
.. Marker exist from:
..
..  * A (prune)
..
.. Command run:
..
..  * hg push -r O
..  * hg push
..
.. Expected exchange:
..
..  * prune marker for A

Setup
-----

  $ . $TESTDIR/testlib/exchange-obsmarker-util.sh

Initial

  $ setuprepos B.2
  creating test repo for test case B.2
  - pulldest
  - main
  - pushdest
  cd into `main` and proceed with env setup
  $ cd main
  $ mkcommit A
  $ hg prune -qd '0 0' .
  $ hg log -G --hidden
  x  f5bc6836db60 (draft): A
  |
  @  a9bdc8b26820 (public): O
  
  $ inspect_obsmarkers
  obsstore content
  ================
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  $ cd ..
  $ cd ..

  $ cp -R B.2 B.2.a
  $ cp -R B.2 B.2.b

Actual Test (explicit push version)
-----------------------------------

  $ dotest B.2.a O
  ## Running testcase B.2.a
  # testing echange of "O" (a9bdc8b26820)
  ## initial state
  # obstore: main
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing "O" from main to pushdest
  pushing to pushdest
  searching for changes
  no changes found
  remote: 1 new obsolescence markers
  ## post push state
  # obstore: main
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  ## pulling "a9bdc8b26820" from main into pulldest
  pulling from main
  no changes found
  1 new obsolescence markers
  ## post pull state
  # obstore: main
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}

Actual Test (bare push version)
-----------------------------------

  $ dotest B.2.b
  ## Running testcase B.2.b
  ## initial state
  # obstore: main
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing from main to pushdest
  pushing to pushdest
  searching for changes
  no changes found
  remote: 1 new obsolescence markers
  ## post push state
  # obstore: main
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  ## pulling from main into pulldest
  pulling from main
  searching for changes
  no changes found
  1 new obsolescence markers
  ## post pull state
  # obstore: main
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}