view tests/test-contrib.t @ 26379:39d643252b9f

revlog: use existing file handle when reading during _addrevision

_addrevision() may need to read from revlogs as part of computing
deltas. Previously, we would flush existing file handles and open
a new, short-lived file handle to perform the reading.

If we have an existing file handle, it seems logical to reuse it
for reading instead of opening a new file handle. This patch
makes that the new behavior.

After this patch, revlog files are only reopened when adding
revisions if the revlog is switched from inline to non-inline.

On Linux when unbundling a bundle of the mozilla-central repo, this
patch has the following impact on system call counts:

Call     Before     After       Delta
write    827,639    673,390   -154,249
open     700,103    684,089    -16,014
read      74,489     74,489          0
fstat    493,924    461,896    -32,028
close    249,131    233,117    -16,014
stat     242,001    242,001          0
lstat     18,676     18,676          0
lseek     20,268     20,268          0
ioctl     14,652     13,173     -1,479
TOTAL  3,180,758  2,930,679   -250,079

It's worth noting that many of the open() calls fail due to missing
files. That's why there are many more open() calls than close().

Despite the significant system call reduction, this change does not
seem to have a significant performance impact on Linux.

On Windows 10 (not a VM, on a SSD), this patch appears to reduce
unbundle time for mozilla-central from ~960s to ~920s. This isn't
as significant as I was hoping. But a decrease it is nonetheless.
Still, Windows unbundle performance is still >2x slower than Linux.

Despite the lack of significant gains, fewer system calls is fewer
system calls. If nothing else, this will narrow the focus of potential
areas to optimize in the future.

Set vars:

  $ CONTRIBDIR="$TESTDIR/../contrib"

Prepare repo-a:

  $ hg init repo-a
  $ cd repo-a

  $ echo this is file a > a
  $ hg add a
  $ hg commit -m first

  $ echo adding to file a >> a
  $ hg commit -m second

  $ echo adding more to file a >> a
  $ hg commit -m third

  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 3 changesets, 3 total revisions

Dumping revlog of file a to stdout:

  $ python "$CONTRIBDIR/dumprevlog" .hg/store/data/a.i
  file: .hg/store/data/a.i
  node: 183d2312b35066fb6b3b449b84efc370d50993d0
  linkrev: 0
  parents: 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000
  length: 15
  -start-
  this is file a
  
  -end-
  node: b1047953b6e6b633c0d8197eaa5116fbdfd3095b
  linkrev: 1
  parents: 183d2312b35066fb6b3b449b84efc370d50993d0 0000000000000000000000000000000000000000
  length: 32
  -start-
  this is file a
  adding to file a
  
  -end-
  node: 8c4fd1f7129b8cdec6c7f58bf48fb5237a4030c1
  linkrev: 2
  parents: b1047953b6e6b633c0d8197eaa5116fbdfd3095b 0000000000000000000000000000000000000000
  length: 54
  -start-
  this is file a
  adding to file a
  adding more to file a
  
  -end-

Dump all revlogs to file repo.dump:

  $ find .hg/store -name "*.i" | sort | xargs python "$CONTRIBDIR/dumprevlog" > ../repo.dump
  $ cd ..

Undumping into repo-b:

  $ hg init repo-b
  $ cd repo-b
  $ python "$CONTRIBDIR/undumprevlog" < ../repo.dump
  .hg/store/00changelog.i
  .hg/store/00manifest.i
  .hg/store/data/a.i
  $ cd ..

Rebuild fncache with clone --pull:

  $ hg clone --pull -U repo-b repo-c
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 3 changes to 1 files

Verify:

  $ hg -R repo-c verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 3 changesets, 3 total revisions

Compare repos:

  $ hg -R repo-c incoming repo-a
  comparing with repo-a
  searching for changes
  no changes found
  [1]

  $ hg -R repo-a incoming repo-c
  comparing with repo-c
  searching for changes
  no changes found
  [1]

Test simplemerge command:

  $ cp "$CONTRIBDIR/simplemerge" .
  $ echo base > base
  $ echo local > local
  $ cat base >> local
  $ cp local orig
  $ cat base > other
  $ echo other >> other

changing local directly

  $ python simplemerge local base other && echo "merge succeeded"
  merge succeeded
  $ cat local
  local
  base
  other
  $ cp orig local

printing to stdout

  $ python simplemerge -p local base other
  local
  base
  other

local:

  $ cat local
  local
  base

conflicts

  $ cp base conflict-local
  $ cp other conflict-other
  $ echo not other >> conflict-local
  $ echo end >> conflict-local
  $ echo end >> conflict-other

  $ python simplemerge -p conflict-local base conflict-other
  base
  <<<<<<< conflict-local
  not other
  end
  =======
  other
  end
  >>>>>>> conflict-other
  warning: conflicts during merge.
  [1]

1 label

  $ python simplemerge -p -L foo conflict-local base conflict-other
  base
  <<<<<<< foo
  not other
  end
  =======
  other
  end
  >>>>>>> conflict-other
  warning: conflicts during merge.
  [1]

2 labels

  $ python simplemerge -p -L foo -L bar conflict-local base conflict-other
  base
  <<<<<<< foo
  not other
  end
  =======
  other
  end
  >>>>>>> bar
  warning: conflicts during merge.
  [1]

3 labels

  $ python simplemerge -p -L foo -L bar -L base conflict-local base conflict-other
  base
  <<<<<<< foo
  not other
  end
  ||||||| base
  =======
  other
  end
  >>>>>>> bar
  warning: conflicts during merge.
  [1]

too many labels

  $ python simplemerge -p -L foo -L bar -L baz -L buz conflict-local base conflict-other
  abort: can only specify three labels.
  [255]

binary file

  $ $PYTHON -c "f = file('binary-local', 'w'); f.write('\x00'); f.close()"
  $ cat orig >> binary-local
  $ python simplemerge -p binary-local base other
  warning: binary-local looks like a binary file.
  [1]

binary file --text

  $ python simplemerge -a -p binary-local base other 2>&1
  warning: binary-local looks like a binary file.
  \x00local (esc)
  base
  other

help

  $ python simplemerge --help
  simplemerge [OPTS] LOCAL BASE OTHER
  
      Simple three-way file merge utility with a minimal feature set.
  
      Apply to LOCAL the changes necessary to go from BASE to OTHER.
  
      By default, LOCAL is overwritten with the results of this operation.
  
  options:
   -L --label       labels to use on conflict markers
   -a --text        treat all files as text
   -p --print       print results instead of overwriting LOCAL
      --no-minimal  no effect (DEPRECATED)
   -h --help        display help and exit
   -q --quiet       suppress output

wrong number of arguments

  $ python simplemerge
  simplemerge: wrong number of arguments
  simplemerge [OPTS] LOCAL BASE OTHER
  
      Simple three-way file merge utility with a minimal feature set.
  
      Apply to LOCAL the changes necessary to go from BASE to OTHER.
  
      By default, LOCAL is overwritten with the results of this operation.
  
  options:
   -L --label       labels to use on conflict markers
   -a --text        treat all files as text
   -p --print       print results instead of overwriting LOCAL
      --no-minimal  no effect (DEPRECATED)
   -h --help        display help and exit
   -q --quiet       suppress output
  [1]

bad option

  $ python simplemerge --foo -p local base other
  simplemerge: option --foo not recognized
  simplemerge [OPTS] LOCAL BASE OTHER
  
      Simple three-way file merge utility with a minimal feature set.
  
      Apply to LOCAL the changes necessary to go from BASE to OTHER.
  
      By default, LOCAL is overwritten with the results of this operation.
  
  options:
   -L --label       labels to use on conflict markers
   -a --text        treat all files as text
   -p --print       print results instead of overwriting LOCAL
      --no-minimal  no effect (DEPRECATED)
   -h --help        display help and exit
   -q --quiet       suppress output
  [1]