view tests/test-convert-cvs-synthetic.t @ 26379:39d643252b9f

revlog: use existing file handle when reading during _addrevision

_addrevision() may need to read from revlogs as part of computing
deltas. Previously, we would flush existing file handles and open
a new, short-lived file handle to perform the reading.

If we have an existing file handle, it seems logical to reuse it
for reading instead of opening a new file handle. This patch
makes that the new behavior.

After this patch, revlog files are only reopened when adding
revisions if the revlog is switched from inline to non-inline.

On Linux when unbundling a bundle of the mozilla-central repo, this
patch has the following impact on system call counts:

Call     Before     After       Delta
write    827,639    673,390   -154,249
open     700,103    684,089    -16,014
read      74,489     74,489          0
fstat    493,924    461,896    -32,028
close    249,131    233,117    -16,014
stat     242,001    242,001          0
lstat     18,676     18,676          0
lseek     20,268     20,268          0
ioctl     14,652     13,173     -1,479
TOTAL  3,180,758  2,930,679   -250,079

It's worth noting that many of the open() calls fail due to missing
files. That's why there are many more open() calls than close().

Despite the significant system call reduction, this change does not
seem to have a significant performance impact on Linux.

On Windows 10 (not a VM, on a SSD), this patch appears to reduce
unbundle time for mozilla-central from ~960s to ~920s. This isn't
as significant as I was hoping. But a decrease it is nonetheless.
Still, Windows unbundle performance is still >2x slower than Linux.

Despite the lack of significant gains, fewer system calls is fewer
system calls. If nothing else, this will narrow the focus of potential
areas to optimize in the future.

#require cvs112

This feature requires use of builtin cvsps!

  $ echo "[extensions]" >> $HGRCPATH
  $ echo "convert = " >> $HGRCPATH

create cvs repository with one project

  $ mkdir cvsrepo
  $ cd cvsrepo
  $ CVSROOT=`pwd`
  $ export CVSROOT
  $ CVS_OPTIONS=-f
  $ export CVS_OPTIONS
  $ cd ..
  $ rmdir cvsrepo
  $ cvscall()
  > {
  >     cvs -f "$@"
  > }

output of 'cvs ci' varies unpredictably, so just discard it

  $ cvsci()
  > {
  >     sleep 1
  >     cvs -f ci "$@" >/dev/null
  > }
  $ cvscall -d "$CVSROOT" init
  $ mkdir cvsrepo/proj
  $ cvscall -q co proj

create file1 on the trunk

  $ cd proj
  $ touch file1
  $ cvscall -Q add file1
  $ cvsci -m"add file1 on trunk" file1

create two branches

  $ cvscall -q tag -b v1_0
  T file1
  $ cvscall -q tag -b v1_1
  T file1

create file2 on branch v1_0

  $ cvscall -Q up -rv1_0
  $ touch file2
  $ cvscall -Q add file2
  $ cvsci -m"add file2" file2

create file3, file4 on branch v1_1

  $ cvscall -Q up -rv1_1
  $ touch file3
  $ touch file4
  $ cvscall -Q add file3 file4
  $ cvsci -m"add file3, file4 on branch v1_1" file3 file4

merge file2 from v1_0 to v1_1

  $ cvscall -Q up -jv1_0
  $ cvsci -m"MERGE from v1_0: add file2"
  cvs commit: Examining .

Step things up a notch: now we make the history really hairy, with
changes bouncing back and forth between trunk and v1_2 and merges
going both ways.  (I.e., try to model the real world.)
create branch v1_2

  $ cvscall -Q up -A
  $ cvscall -q tag -b v1_2
  T file1

create file5 on branch v1_2

  $ cvscall -Q up -rv1_2
  $ touch file5
  $ cvs -Q add file5
  $ cvsci -m"add file5 on v1_2"
  cvs commit: Examining .

create file6 on trunk post-v1_2

  $ cvscall -Q up -A
  $ touch file6
  $ cvscall -Q add file6
  $ cvsci -m"add file6 on trunk post-v1_2"
  cvs commit: Examining .

merge file5 from v1_2 to trunk

  $ cvscall -Q up -A
  $ cvscall -Q up -jv1_2 file5
  $ cvsci -m"MERGE from v1_2: add file5"
  cvs commit: Examining .

merge file6 from trunk to v1_2

  $ cvscall -Q up -rv1_2
  $ cvscall up -jHEAD file6
  U file6
  $ cvsci -m"MERGE from HEAD: add file6"
  cvs commit: Examining .

cvs rlog output

  $ cvscall -q rlog proj | egrep '^(RCS file|revision)'
  RCS file: $TESTTMP/cvsrepo/proj/file1,v
  revision 1.1
  RCS file: $TESTTMP/cvsrepo/proj/Attic/file2,v
  revision 1.1
  revision 1.1.4.2
  revision 1.1.4.1
  revision 1.1.2.1
  RCS file: $TESTTMP/cvsrepo/proj/Attic/file3,v
  revision 1.1
  revision 1.1.2.1
  RCS file: $TESTTMP/cvsrepo/proj/Attic/file4,v
  revision 1.1
  revision 1.1.2.1
  RCS file: $TESTTMP/cvsrepo/proj/file5,v
  revision 1.2
  revision 1.1
  revision 1.1.2.1
  RCS file: $TESTTMP/cvsrepo/proj/file6,v
  revision 1.1
  revision 1.1.2.2
  revision 1.1.2.1

convert to hg (#1)

  $ cd ..
  $ hg convert --datesort proj proj.hg
  initializing destination proj.hg repository
  connecting to $TESTTMP/cvsrepo
  scanning source...
  collecting CVS rlog
  15 log entries
  creating changesets
  9 changeset entries
  sorting...
  converting...
  8 add file1 on trunk
  7 add file2
  6 MERGE from v1_0: add file2
  5 file file3 was initially added on branch v1_1.
  4 add file3, file4 on branch v1_1
  3 add file5 on v1_2
  2 add file6 on trunk post-v1_2
  1 MERGE from HEAD: add file6
  0 MERGE from v1_2: add file5

hg log -G output (#1)

  $ hg -R proj.hg log -G --template "{rev} {desc}\n"
  o  8 MERGE from v1_2: add file5
  |
  | o  7 MERGE from HEAD: add file6
  | |
  o |  6 add file6 on trunk post-v1_2
  | |
  | o  5 add file5 on v1_2
  | |
  | | o  4 add file3, file4 on branch v1_1
  | | |
  o | |  3 file file3 was initially added on branch v1_1.
  |/ /
  | o  2 MERGE from v1_0: add file2
  |/
  | o  1 add file2
  |/
  o  0 add file1 on trunk
  

convert to hg (#2: with merge detection)

  $ hg convert \
  >   --config convert.cvsps.mergefrom='"^MERGE from (\S+):"' \
  >   --datesort \
  >   proj proj.hg2
  initializing destination proj.hg2 repository
  connecting to $TESTTMP/cvsrepo
  scanning source...
  collecting CVS rlog
  15 log entries
  creating changesets
  9 changeset entries
  sorting...
  converting...
  8 add file1 on trunk
  7 add file2
  6 MERGE from v1_0: add file2
  5 file file3 was initially added on branch v1_1.
  4 add file3, file4 on branch v1_1
  3 add file5 on v1_2
  2 add file6 on trunk post-v1_2
  1 MERGE from HEAD: add file6
  0 MERGE from v1_2: add file5

hg log -G output (#2)

  $ hg -R proj.hg2 log -G --template "{rev} {desc}\n"
  o  8 MERGE from v1_2: add file5
  |
  | o  7 MERGE from HEAD: add file6
  | |
  o |  6 add file6 on trunk post-v1_2
  | |
  | o  5 add file5 on v1_2
  | |
  | | o  4 add file3, file4 on branch v1_1
  | | |
  o | |  3 file file3 was initially added on branch v1_1.
  |/ /
  | o  2 MERGE from v1_0: add file2
  |/
  | o  1 add file2
  |/
  o  0 add file1 on trunk