view tests/test-setdiscovery.t @ 26379:39d643252b9f

revlog: use existing file handle when reading during _addrevision

_addrevision() may need to read from revlogs as part of computing
deltas. Previously, we would flush existing file handles and open
a new, short-lived file handle to perform the reading.

If we have an existing file handle, it seems logical to reuse it
for reading instead of opening a new file handle. This patch
makes that the new behavior.

After this patch, revlog files are only reopened when adding
revisions if the revlog is switched from inline to non-inline.

On Linux when unbundling a bundle of the mozilla-central repo, this
patch has the following impact on system call counts:

Call     Before     After       Delta
write    827,639    673,390   -154,249
open     700,103    684,089    -16,014
read      74,489     74,489          0
fstat    493,924    461,896    -32,028
close    249,131    233,117    -16,014
stat     242,001    242,001          0
lstat     18,676     18,676          0
lseek     20,268     20,268          0
ioctl     14,652     13,173     -1,479
TOTAL  3,180,758  2,930,679   -250,079

It's worth noting that many of the open() calls fail due to missing
files. That's why there are many more open() calls than close().

Despite the significant system call reduction, this change does not
seem to have a significant performance impact on Linux.

On Windows 10 (not a VM, on a SSD), this patch appears to reduce
unbundle time for mozilla-central from ~960s to ~920s. This isn't
as significant as I was hoping. But a decrease it is nonetheless.
Still, Windows unbundle performance is still >2x slower than Linux.

Despite the lack of significant gains, fewer system calls is fewer
system calls. If nothing else, this will narrow the focus of potential
areas to optimize in the future.

Function to test discovery between two repos in both directions, using both the local shortcut
(which is currently not activated by default) and the full remotable protocol:

  $ testdesc() { # revs_a, revs_b, dagdesc
  >     if [ -d foo ]; then rm -rf foo; fi
  >     hg init foo
  >     cd foo
  >     hg debugbuilddag "$3"
  >     hg clone . a $1 --quiet
  >     hg clone . b $2 --quiet
  >     echo
  >     echo "% -- a -> b tree"
  >     hg -R a debugdiscovery b --verbose --old
  >     echo
  >     echo "% -- a -> b set"
  >     hg -R a debugdiscovery b --verbose --debug --config progress.debug=true
  >     echo
  >     echo "% -- b -> a tree"
  >     hg -R b debugdiscovery a --verbose --old --config
  >     echo
  >     echo "% -- b -> a set"
  >     hg -R b debugdiscovery a --verbose --debug --config progress.debug=true
  >     cd ..
  > }


Small superset:

  $ testdesc '-ra1 -ra2' '-rb1 -rb2 -rb3' '
  > +2:f +1:a1:b1
  > <f +4 :a2
  > +5 :b2
  > <f +3 :b3'
  
  % -- a -> b tree
  comparing with b
  searching for changes
  unpruned common: 01241442b3c2 66f7d451a68b b5714e113bc0
  common heads: 01241442b3c2 b5714e113bc0
  local is subset
  
  % -- a -> b set
  comparing with b
  query 1; heads
  searching for changes
  all local heads known remotely
  common heads: 01241442b3c2 b5714e113bc0
  local is subset
  
  % -- b -> a tree
  comparing with a
  searching for changes
  unpruned common: 01241442b3c2 b5714e113bc0
  common heads: 01241442b3c2 b5714e113bc0
  remote is subset
  
  % -- b -> a set
  comparing with a
  query 1; heads
  searching for changes
  all remote heads known locally
  common heads: 01241442b3c2 b5714e113bc0
  remote is subset


Many new:

  $ testdesc '-ra1 -ra2' '-rb' '
  > +2:f +3:a1 +3:b
  > <f +30 :a2'
  
  % -- a -> b tree
  comparing with b
  searching for changes
  unpruned common: bebd167eb94d
  common heads: bebd167eb94d
  
  % -- a -> b set
  comparing with b
  query 1; heads
  searching for changes
  taking initial sample
  searching: 2 queries
  query 2; still undecided: 29, sample size is: 29
  2 total queries
  common heads: bebd167eb94d
  
  % -- b -> a tree
  comparing with a
  searching for changes
  unpruned common: 66f7d451a68b bebd167eb94d
  common heads: bebd167eb94d
  
  % -- b -> a set
  comparing with a
  query 1; heads
  searching for changes
  taking initial sample
  searching: 2 queries
  query 2; still undecided: 2, sample size is: 2
  2 total queries
  common heads: bebd167eb94d


Both sides many new with stub:

  $ testdesc '-ra1 -ra2' '-rb' '
  > +2:f +2:a1 +30 :b
  > <f +30 :a2'
  
  % -- a -> b tree
  comparing with b
  searching for changes
  unpruned common: 2dc09a01254d
  common heads: 2dc09a01254d
  
  % -- a -> b set
  comparing with b
  query 1; heads
  searching for changes
  taking initial sample
  searching: 2 queries
  query 2; still undecided: 29, sample size is: 29
  2 total queries
  common heads: 2dc09a01254d
  
  % -- b -> a tree
  comparing with a
  searching for changes
  unpruned common: 2dc09a01254d 66f7d451a68b
  common heads: 2dc09a01254d
  
  % -- b -> a set
  comparing with a
  query 1; heads
  searching for changes
  taking initial sample
  searching: 2 queries
  query 2; still undecided: 29, sample size is: 29
  2 total queries
  common heads: 2dc09a01254d


Both many new:

  $ testdesc '-ra' '-rb' '
  > +2:f +30 :b
  > <f +30 :a'
  
  % -- a -> b tree
  comparing with b
  searching for changes
  unpruned common: 66f7d451a68b
  common heads: 66f7d451a68b
  
  % -- a -> b set
  comparing with b
  query 1; heads
  searching for changes
  taking quick initial sample
  searching: 2 queries
  query 2; still undecided: 31, sample size is: 31
  2 total queries
  common heads: 66f7d451a68b
  
  % -- b -> a tree
  comparing with a
  searching for changes
  unpruned common: 66f7d451a68b
  common heads: 66f7d451a68b
  
  % -- b -> a set
  comparing with a
  query 1; heads
  searching for changes
  taking quick initial sample
  searching: 2 queries
  query 2; still undecided: 31, sample size is: 31
  2 total queries
  common heads: 66f7d451a68b


Both many new skewed:

  $ testdesc '-ra' '-rb' '
  > +2:f +30 :b
  > <f +50 :a'
  
  % -- a -> b tree
  comparing with b
  searching for changes
  unpruned common: 66f7d451a68b
  common heads: 66f7d451a68b
  
  % -- a -> b set
  comparing with b
  query 1; heads
  searching for changes
  taking quick initial sample
  searching: 2 queries
  query 2; still undecided: 51, sample size is: 51
  2 total queries
  common heads: 66f7d451a68b
  
  % -- b -> a tree
  comparing with a
  searching for changes
  unpruned common: 66f7d451a68b
  common heads: 66f7d451a68b
  
  % -- b -> a set
  comparing with a
  query 1; heads
  searching for changes
  taking quick initial sample
  searching: 2 queries
  query 2; still undecided: 31, sample size is: 31
  2 total queries
  common heads: 66f7d451a68b


Both many new on top of long history:

  $ testdesc '-ra' '-rb' '
  > +1000:f +30 :b
  > <f +50 :a'
  
  % -- a -> b tree
  comparing with b
  searching for changes
  unpruned common: 7ead0cba2838
  common heads: 7ead0cba2838
  
  % -- a -> b set
  comparing with b
  query 1; heads
  searching for changes
  taking quick initial sample
  searching: 2 queries
  query 2; still undecided: 1049, sample size is: 11
  sampling from both directions
  searching: 3 queries
  query 3; still undecided: 31, sample size is: 31
  3 total queries
  common heads: 7ead0cba2838
  
  % -- b -> a tree
  comparing with a
  searching for changes
  unpruned common: 7ead0cba2838
  common heads: 7ead0cba2838
  
  % -- b -> a set
  comparing with a
  query 1; heads
  searching for changes
  taking quick initial sample
  searching: 2 queries
  query 2; still undecided: 1029, sample size is: 11
  sampling from both directions
  searching: 3 queries
  query 3; still undecided: 15, sample size is: 15
  3 total queries
  common heads: 7ead0cba2838


One with >200 heads, which used to use up all of the sample:

  $ hg init manyheads
  $ cd manyheads
  $ echo "+300:r @a" >dagdesc
  $ echo "*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3 *r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3" >>dagdesc # 20 heads
  $ echo "*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3 *r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3" >>dagdesc # 20 heads
  $ echo "*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3 *r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3" >>dagdesc # 20 heads
  $ echo "*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3 *r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3" >>dagdesc # 20 heads
  $ echo "*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3 *r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3" >>dagdesc # 20 heads
  $ echo "*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3 *r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3" >>dagdesc # 20 heads
  $ echo "*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3 *r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3" >>dagdesc # 20 heads
  $ echo "*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3 *r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3" >>dagdesc # 20 heads
  $ echo "*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3 *r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3" >>dagdesc # 20 heads
  $ echo "*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3 *r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3" >>dagdesc # 20 heads
  $ echo "*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3 *r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3" >>dagdesc # 20 heads
  $ echo "*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3 *r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3" >>dagdesc # 20 heads
  $ echo "*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3 *r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3" >>dagdesc # 20 heads
  $ echo "@b *r+3" >>dagdesc # one more head
  $ hg debugbuilddag <dagdesc
  reading DAG from stdin

  $ hg heads -t --template . | wc -c
  \s*261 (re)

  $ hg clone -b a . a
  adding changesets
  adding manifests
  adding file changes
  added 1340 changesets with 0 changes to 0 files (+259 heads)
  updating to branch a
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg clone -b b . b
  adding changesets
  adding manifests
  adding file changes
  added 304 changesets with 0 changes to 0 files
  updating to branch b
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg -R a debugdiscovery b --debug --verbose --config progress.debug=true
  comparing with b
  query 1; heads
  searching for changes
  taking quick initial sample
  searching: 2 queries
  query 2; still undecided: 1240, sample size is: 100
  sampling from both directions
  searching: 3 queries
  query 3; still undecided: 1140, sample size is: 200
  sampling from both directions
  searching: 4 queries
  query 4; still undecided: 592, sample size is: 200
  sampling from both directions
  searching: 5 queries
  query 5; still undecided: 292, sample size is: 200
  sampling from both directions
  searching: 6 queries
  query 6; still undecided: 51, sample size is: 51
  6 total queries
  common heads: 3ee37d65064a

Test actual protocol when pulling one new head in addition to common heads

  $ hg clone -U b c
  $ hg -R c id -ir tip
  513314ca8b3a
  $ hg -R c up -qr default
  $ touch c/f
  $ hg -R c ci -Aqm "extra head"
  $ hg -R c id -i
  e64a39e7da8b

  $ hg serve -R c -p $HGPORT -d --pid-file=hg.pid -A access.log -E errors.log
  $ cat hg.pid >> $DAEMON_PIDS

  $ hg -R b incoming http://localhost:$HGPORT/ -T '{node|short}\n'
  comparing with http://localhost:$HGPORT/
  searching for changes
  e64a39e7da8b

  $ killdaemons.py
  $ cut -d' ' -f6- access.log | grep -v cmd=known # cmd=known uses random sampling
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D513314ca8b3ae4dac8eec56966265b00fcf866db
  "GET /?cmd=getbundle HTTP/1.1" 200 - x-hgarg-1:common=513314ca8b3ae4dac8eec56966265b00fcf866db&heads=e64a39e7da8b0d54bc63e81169aff001c13b3477
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases
  $ cat errors.log

  $ cd ..


Issue 4438 - test coverage for 3ef893520a85 issues.

  $ mkdir issue4438
  $ cd issue4438
#if false
generate new bundles:
  $ hg init r1
  $ for i in `python $TESTDIR/seq.py 101`; do hg -R r1 up -qr null && hg -R r1 branch -q b$i && hg -R r1 ci -qmb$i; done
  $ hg clone -q r1 r2
  $ for i in `python $TESTDIR/seq.py 10`; do hg -R r1 up -qr null && hg -R r1 branch -q c$i && hg -R r1 ci -qmc$i; done
  $ hg -R r2 branch -q r2change && hg -R r2 ci -qmr2change
  $ hg -R r1 bundle -qa $TESTDIR/bundles/issue4438-r1.hg
  $ hg -R r2 bundle -qa $TESTDIR/bundles/issue4438-r2.hg
#else
use existing bundles:
  $ hg clone -q $TESTDIR/bundles/issue4438-r1.hg r1
  $ hg clone -q $TESTDIR/bundles/issue4438-r2.hg r2
#endif

Set iteration order could cause wrong and unstable results - fixed in 73cfaa348650:

  $ hg -R r1 outgoing r2 -T'{rev} '
  comparing with r2
  searching for changes
  101 102 103 104 105 106 107 108 109 110  (no-eol)

The case where all the 'initialsamplesize' samples already were common would
give 'all remote heads known locally' without checking the remaining heads -
fixed in 86c35b7ae300:

  $ cat >> $TESTTMP/unrandomsample.py << EOF
  > import random
  > def sample(population, k):
  >     return sorted(population)[:k]
  > random.sample = sample
  > EOF

  $ cat >> r1/.hg/hgrc << EOF
  > [extensions]
  > unrandomsample = $TESTTMP/unrandomsample.py
  > EOF

  $ hg -R r1 outgoing r2 -T'{rev} '
  comparing with r2
  searching for changes
  101 102 103 104 105 106 107 108 109 110  (no-eol)
  $ cd ..