revset: introduce new operator "##" to concatenate strings/symbols at runtime
Before this patch, there is no way to concatenate strings at runtime.
For example, to search for the issue ID "1234" in descriptions against
all of "issue 1234", "issue:1234", issue1234" and "bug(1234)"
patterns, the revset below should be written fully from scratch for
each issue ID.
grep(r"\bissue[ :]?1234\b|\bbug\(1234\)")
This patch introduces new infix operator "##" to concatenate
strings/symbols at runtime. Operator symbol "##" comes from the same
one of C pre-processor. This concatenation allows parametrizing a part
of strings in revset queries.
In the case of example above, the definition of the revset alias using
operator "##" below can search issue ID "1234" in complicated patterns
by "issue(1234)" simply:
issue($1) = grep(r"\bissue[ :]?" ## $1 ## r"\b|\bbug\(" ## $1 ## r"\)")
"##" operator does:
- concatenate not only strings but also symbols into the string
Exact distinction between strings and symbols seems not to be
convenience, because it is tiresome for users (and
"revset.getstring" treats both similarly)
For example of revset alias "issue()", "issue(1234)" is easier
than "issue('1234')".
- have higher priority than any other prefix, infix and postfix
operators (like as "##" of C pre-processor)
This patch (re-)assigns the priority 20 to "##", and 21 to "(",
because priority 19 is already assigned to "-" as prefix "negate".
Test interactions between mq and patch.eol
$ cat <<EOF >> $HGRCPATH
> [extensions]
> mq =
> [diff]
> nodates = 1
> EOF
$ cat > makepatch.py <<EOF
> f = file('eol.diff', 'wb')
> w = f.write
> w('test message\n')
> w('diff --git a/a b/a\n')
> w('--- a/a\n')
> w('+++ b/a\n')
> w('@@ -1,5 +1,5 @@\n')
> w(' a\n')
> w('-b\r\n')
> w('+y\r\n')
> w(' c\r\n')
> w(' d\n')
> w('-e\n')
> w('\ No newline at end of file\n')
> w('+z\r\n')
> w('\ No newline at end of file\r\n')
> EOF
$ cat > cateol.py <<EOF
> import sys
> for line in file(sys.argv[1], 'rb'):
> line = line.replace('\r', '<CR>')
> line = line.replace('\n', '<LF>')
> print line
> EOF
$ hg init repo
$ cd repo
$ echo '\.diff' > .hgignore
$ echo '\.rej' >> .hgignore
Test different --eol values
$ $PYTHON -c 'file("a", "wb").write("a\nb\nc\nd\ne")'
$ hg ci -Am adda
adding .hgignore
adding a
$ python ../makepatch.py
$ hg qimport eol.diff
adding eol.diff to series file
should fail in strict mode
$ hg qpush
applying eol.diff
patching file a
Hunk #1 FAILED at 0
1 out of 1 hunks FAILED -- saving rejects to file a.rej
patch failed, unable to continue (try -v)
patch failed, rejects left in working dir
errors during apply, please fix and refresh eol.diff
[2]
$ hg qpop
popping eol.diff
patch queue now empty
invalid eol
$ hg --config patch.eol='LFCR' qpush
applying eol.diff
patch failed, unable to continue (try -v)
patch failed, rejects left in working dir
errors during apply, please fix and refresh eol.diff
[2]
$ hg qpop
popping eol.diff
patch queue now empty
force LF
$ hg --config patch.eol='CRLF' qpush
applying eol.diff
now at: eol.diff
$ hg qrefresh
$ python ../cateol.py .hg/patches/eol.diff
# HG changeset patch<LF>
# Parent 0d0bf99a8b7a3842c6f8ef09e34f69156c4bd9d0<LF>
test message<LF>
<LF>
diff -r 0d0bf99a8b7a a<LF>
--- a/a<LF>
+++ b/a<LF>
@@ -1,5 +1,5 @@<LF>
-a<LF>
-b<LF>
-c<LF>
-d<LF>
-e<LF>
\ No newline at end of file<LF>
+a<CR><LF>
+y<CR><LF>
+c<CR><LF>
+d<CR><LF>
+z<LF>
\ No newline at end of file<LF>
$ python ../cateol.py a
a<CR><LF>
y<CR><LF>
c<CR><LF>
d<CR><LF>
z
$ hg qpop
popping eol.diff
patch queue now empty
push again forcing LF and compare revisions
$ hg --config patch.eol='CRLF' qpush
applying eol.diff
now at: eol.diff
$ python ../cateol.py a
a<CR><LF>
y<CR><LF>
c<CR><LF>
d<CR><LF>
z
$ hg qpop
popping eol.diff
patch queue now empty
push again without LF and compare revisions
$ hg qpush
applying eol.diff
now at: eol.diff
$ python ../cateol.py a
a<CR><LF>
y<CR><LF>
c<CR><LF>
d<CR><LF>
z
$ hg qpop
popping eol.diff
patch queue now empty
$ cd ..
Test .rej file EOL are left unchanged
$ hg init testeol
$ cd testeol
$ $PYTHON -c "file('a', 'wb').write('1\r\n2\r\n3\r\n4')"
$ hg ci -Am adda
adding a
$ $PYTHON -c "file('a', 'wb').write('1\r\n2\r\n33\r\n4')"
$ hg qnew patch1
$ hg qpop
popping patch1
patch queue now empty
$ $PYTHON -c "file('a', 'wb').write('1\r\n22\r\n33\r\n4')"
$ hg ci -m changea
$ hg --config 'patch.eol=LF' qpush
applying patch1
patching file a
Hunk #1 FAILED at 0
1 out of 1 hunks FAILED -- saving rejects to file a.rej
patch failed, unable to continue (try -v)
patch failed, rejects left in working dir
errors during apply, please fix and refresh patch1
[2]
$ hg qpop
popping patch1
patch queue now empty
$ cat a.rej
--- a
+++ a
@@ -1,4 +1,4 @@
1\r (esc)
2\r (esc)
-3\r (esc)
+33\r (esc)
4
\ No newline at end of file
$ hg --config 'patch.eol=auto' qpush
applying patch1
patching file a
Hunk #1 FAILED at 0
1 out of 1 hunks FAILED -- saving rejects to file a.rej
patch failed, unable to continue (try -v)
patch failed, rejects left in working dir
errors during apply, please fix and refresh patch1
[2]
$ hg qpop
popping patch1
patch queue now empty
$ cat a.rej
--- a
+++ a
@@ -1,4 +1,4 @@
1\r (esc)
2\r (esc)
-3\r (esc)
+33\r (esc)
4
\ No newline at end of file
$ cd ..