revset: introduce new operator "##" to concatenate strings/symbols at runtime
Before this patch, there is no way to concatenate strings at runtime.
For example, to search for the issue ID "1234" in descriptions against
all of "issue 1234", "issue:1234", issue1234" and "bug(1234)"
patterns, the revset below should be written fully from scratch for
each issue ID.
grep(r"\bissue[ :]?1234\b|\bbug\(1234\)")
This patch introduces new infix operator "##" to concatenate
strings/symbols at runtime. Operator symbol "##" comes from the same
one of C pre-processor. This concatenation allows parametrizing a part
of strings in revset queries.
In the case of example above, the definition of the revset alias using
operator "##" below can search issue ID "1234" in complicated patterns
by "issue(1234)" simply:
issue($1) = grep(r"\bissue[ :]?" ## $1 ## r"\b|\bbug\(" ## $1 ## r"\)")
"##" operator does:
- concatenate not only strings but also symbols into the string
Exact distinction between strings and symbols seems not to be
convenience, because it is tiresome for users (and
"revset.getstring" treats both similarly)
For example of revset alias "issue()", "issue(1234)" is easier
than "issue('1234')".
- have higher priority than any other prefix, infix and postfix
operators (like as "##" of C pre-processor)
This patch (re-)assigns the priority 20 to "##", and 21 to "(",
because priority 19 is already assigned to "-" as prefix "negate".
$ hg init t
$ cd t
$ echo 1 > foo
$ hg ci -Am1 # 0
adding foo
$ hg branch branchA
marked working directory as branch branchA
(branches are permanent and global, did you want a bookmark?)
$ echo a1 > foo
$ hg ci -ma1 # 1
$ cd ..
$ hg init tt
$ cd tt
$ hg pull ../t
pulling from ../t
requesting all changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 1 files
(run 'hg update' to get a working copy)
$ hg up branchA
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd ../t
$ echo a2 > foo
$ hg ci -ma2 # 2
Create branch B:
$ hg up 0
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg branch branchB
marked working directory as branch branchB
(branches are permanent and global, did you want a bookmark?)
$ echo b1 > foo
$ hg ci -mb1 # 3
$ cd ../tt
A new branch is there
$ hg pull -u ../t
pulling from ../t
searching for changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 1 files (+1 heads)
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
Develop both branches:
$ cd ../t
$ hg up branchA
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo a3 > foo
$ hg ci -ma3 # 4
$ hg up branchB
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo b2 > foo
$ hg ci -mb2 # 5
$ cd ../tt
Should succeed, no new heads:
$ hg pull -u ../t
pulling from ../t
searching for changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 1 files
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
Add a head on other branch:
$ cd ../t
$ hg up branchA
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo a4 > foo
$ hg ci -ma4 # 6
$ hg up branchB
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo b3.1 > foo
$ hg ci -m b3.1 # 7
$ hg up 5
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo b3.2 > foo
$ hg ci -m b3.2 # 8
created new head
$ cd ../tt
Should succeed because there is only one head on our branch:
$ hg pull -u ../t
pulling from ../t
searching for changes
adding changesets
adding manifests
adding file changes
added 3 changesets with 3 changes to 1 files (+1 heads)
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd ../t
$ hg up -C branchA
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo a5.1 > foo
$ hg ci -ma5.1 # 9
$ hg up 6
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo a5.2 > foo
$ hg ci -ma5.2 # 10
created new head
$ hg up 7
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo b4.1 > foo
$ hg ci -m b4.1 # 11
$ hg up -C 8
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo b4.2 > foo
$ hg ci -m b4.2 # 12
$ cd ../tt
$ hg pull -u ../t
pulling from ../t
searching for changes
adding changesets
adding manifests
adding file changes
added 4 changesets with 4 changes to 1 files (+1 heads)
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
Make changes on new branch on tt
$ hg up 6
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg branch branchC
marked working directory as branch branchC
(branches are permanent and global, did you want a bookmark?)
$ echo b1 > bar
$ hg ci -Am "commit on branchC on tt"
adding bar
Make changes on default branch on t
$ cd ../t
$ hg up -C default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo a1 > bar
$ hg ci -Am "commit on default on t"
adding bar
Pull branchC from tt
$ hg pull ../tt
pulling from ../tt
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files (+1 heads)
(run 'hg heads' to see heads)
Make changes on default and branchC on tt
$ cd ../tt
$ hg pull ../t
pulling from ../t
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files (+1 heads)
(run 'hg heads' to see heads)
$ hg up -C default
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo a1 > bar1
$ hg ci -Am "commit on default on tt"
adding bar1
$ hg up branchC
2 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ echo a1 > bar2
$ hg ci -Am "commit on branchC on tt"
adding bar2
Make changes on default and branchC on t
$ cd ../t
$ hg up default
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo a1 > bar3
$ hg ci -Am "commit on default on t"
adding bar3
$ hg up branchC
2 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ echo a1 > bar4
$ hg ci -Am "commit on branchC on tt"
adding bar4
Pull from tt
$ hg pull ../tt
pulling from ../tt
searching for changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 2 files (+2 heads)
(run 'hg heads .' to see heads, 'hg merge' to merge)
$ cd ..