windows: degrade to py2 behavior when reading a non-symlink as a symlink
While waiting for the push to hg-committed in WSL to complete, I ran a
`phabimport` from Windows and got this traceback:
$ hg phabimport 11313
** Unknown exception encountered with possibly-broken third-party extension "mercurial_keyring" (version N/A)
** which supports versions unknown of Mercurial.
** Please disable "mercurial_keyring" and try your action again.
** If that fixes the bug please report it to https://foss.heptapod.net/mercurial/mercurial_keyring/issues
** Python 3.9.5 (default, May 6 2021, 17:29:31) [MSC v.1928 64 bit (AMD64)]
** Mercurial Distributed SCM (version 5.9rc1+hg32.0e2f5733563d)
** Extensions loaded: absorb, blackbox, evolve 10.3.3, extdiff, fastannotate, fix, mercurial_keyring, mq, phabblocker 20210126, phabricator, rebase, show, strip, topic 0.22.3
Traceback (most recent call last):
File "mercurial.lock", line 279, in _trylock
File "mercurial.vfs", line 202, in makelock
File "mercurial.util", line 2147, in makelock
FileExistsError: [WinError 183] Cannot create a file when that file already exists: b'hp-omen:78348' -> b'C:\\Users\\Matt\\hg/.hg/store/lock'
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "<string>", line 24, in <module>
File "mercurial.dispatch", line 144, in run
File "mercurial.dispatch", line 250, in dispatch
File "mercurial.dispatch", line 294, in _rundispatch
File "mercurial.dispatch", line 470, in _runcatch
File "mercurial.dispatch", line 480, in _callcatch
File "mercurial.scmutil", line 153, in callcatch
File "mercurial.dispatch", line 460, in _runcatchfunc
File "mercurial.dispatch", line 1273, in _dispatch
File "mercurial.dispatch", line 918, in runcommand
File "mercurial.dispatch", line 1285, in _runcommand
File "mercurial.dispatch", line 1271, in <lambda>
File "mercurial.util", line 1886, in check
File "mercurial.util", line 1886, in check
File "hgext.mq", line 4239, in mqcommand
File "mercurial.util", line 1886, in check
File "mercurial.util", line 1886, in check
File "hgext.phabricator", line 314, in inner
File "hgext.phabricator", line 2222, in phabimport
File "hgext.phabricator", line 2123, in readpatch
File "hgext.phabricator", line 2199, in _write
File "mercurial.localrepo", line 2956, in lock
File "mercurial.localrepo", line 2918, in _lock
File "mercurial.lock", line 152, in trylock
File "mercurial.lock", line 283, in _trylock
File "mercurial.lock", line 314, in _readlock
File "mercurial.vfs", line 221, in readlock
File "mercurial.util", line 2163, in readlock
File "mercurial.windows", line 619, in readlink
ValueError: not a symbolic link
Both exceptions look accurate (the file exists, and the Windows side can't read
WSL side symlinks). I didn't try to reproduce this entirely within the Windows
side, but we can do better than a cryptic stacktrace. With this change, the
same scenario results in this abort:
abort: C:\Users\Matt\hg/.hg/store/lock: The file cannot be accessed by the system
When both the `push` and `phabimport` are done on the Windows side, it prints a
message about waiting for the lock, and successfully applies the patch after the
push completes.
I'm not sure if there's enough info to be able to convert the abort into the
wait scenario. As it stands now, we don't support symlinks on Windows, which
requires either a UAC Administrator level process or an opt-in in developer
mode, and there are several places where the new symlink on Windows support in
py3 was explicitly disabled in order to get tests to pass quicker.
Differential Revision: https://phab.mercurial-scm.org/D11333
# sparse.py - functionality for sparse checkouts
#
# Copyright 2014 Facebook, Inc.
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
from __future__ import absolute_import
import os
from .i18n import _
from .node import hex
from . import (
error,
match as matchmod,
merge as mergemod,
mergestate as mergestatemod,
pathutil,
pycompat,
requirements,
scmutil,
util,
)
from .utils import hashutil
# Whether sparse features are enabled. This variable is intended to be
# temporary to facilitate porting sparse to core. It should eventually be
# a per-repo option, possibly a repo requirement.
enabled = False
def parseconfig(ui, raw, action):
"""Parse sparse config file content.
action is the command which is trigerring this read, can be narrow, sparse
Returns a tuple of includes, excludes, and profiles.
"""
includes = set()
excludes = set()
profiles = set()
current = None
havesection = False
for line in raw.split(b'\n'):
line = line.strip()
if not line or line.startswith(b'#'):
# empty or comment line, skip
continue
elif line.startswith(b'%include '):
line = line[9:].strip()
if line:
profiles.add(line)
elif line == b'[include]':
if havesection and current != includes:
# TODO pass filename into this API so we can report it.
raise error.Abort(
_(
b'%(action)s config cannot have includes '
b'after excludes'
)
% {b'action': action}
)
havesection = True
current = includes
continue
elif line == b'[exclude]':
havesection = True
current = excludes
elif line:
if current is None:
raise error.Abort(
_(
b'%(action)s config entry outside of '
b'section: %(line)s'
)
% {b'action': action, b'line': line},
hint=_(
b'add an [include] or [exclude] line '
b'to declare the entry type'
),
)
if line.strip().startswith(b'/'):
ui.warn(
_(
b'warning: %(action)s profile cannot use'
b' paths starting with /, ignoring %(line)s\n'
)
% {b'action': action, b'line': line}
)
continue
current.add(line)
return includes, excludes, profiles
# Exists as separate function to facilitate monkeypatching.
def readprofile(repo, profile, changeid):
"""Resolve the raw content of a sparse profile file."""
# TODO add some kind of cache here because this incurs a manifest
# resolve and can be slow.
return repo.filectx(profile, changeid=changeid).data()
def patternsforrev(repo, rev):
"""Obtain sparse checkout patterns for the given rev.
Returns a tuple of iterables representing includes, excludes, and
patterns.
"""
# Feature isn't enabled. No-op.
if not enabled:
return set(), set(), set()
raw = repo.vfs.tryread(b'sparse')
if not raw:
return set(), set(), set()
if rev is None:
raise error.Abort(
_(b'cannot parse sparse patterns from working directory')
)
includes, excludes, profiles = parseconfig(repo.ui, raw, b'sparse')
ctx = repo[rev]
if profiles:
visited = set()
while profiles:
profile = profiles.pop()
if profile in visited:
continue
visited.add(profile)
try:
raw = readprofile(repo, profile, rev)
except error.ManifestLookupError:
msg = (
b"warning: sparse profile '%s' not found "
b"in rev %s - ignoring it\n" % (profile, ctx)
)
# experimental config: sparse.missingwarning
if repo.ui.configbool(b'sparse', b'missingwarning'):
repo.ui.warn(msg)
else:
repo.ui.debug(msg)
continue
pincludes, pexcludes, subprofs = parseconfig(
repo.ui, raw, b'sparse'
)
includes.update(pincludes)
excludes.update(pexcludes)
profiles.update(subprofs)
profiles = visited
if includes:
includes.add(b'.hg*')
return includes, excludes, profiles
def activeconfig(repo):
"""Determine the active sparse config rules.
Rules are constructed by reading the current sparse config and bringing in
referenced profiles from parents of the working directory.
"""
revs = [
repo.changelog.rev(node)
for node in repo.dirstate.parents()
if node != repo.nullid
]
allincludes = set()
allexcludes = set()
allprofiles = set()
for rev in revs:
includes, excludes, profiles = patternsforrev(repo, rev)
allincludes |= includes
allexcludes |= excludes
allprofiles |= profiles
return allincludes, allexcludes, allprofiles
def configsignature(repo, includetemp=True):
"""Obtain the signature string for the current sparse configuration.
This is used to construct a cache key for matchers.
"""
cache = repo._sparsesignaturecache
signature = cache.get(b'signature')
if includetemp:
tempsignature = cache.get(b'tempsignature')
else:
tempsignature = b'0'
if signature is None or (includetemp and tempsignature is None):
signature = hex(hashutil.sha1(repo.vfs.tryread(b'sparse')).digest())
cache[b'signature'] = signature
if includetemp:
raw = repo.vfs.tryread(b'tempsparse')
tempsignature = hex(hashutil.sha1(raw).digest())
cache[b'tempsignature'] = tempsignature
return b'%s %s' % (signature, tempsignature)
def writeconfig(repo, includes, excludes, profiles):
"""Write the sparse config file given a sparse configuration."""
with repo.vfs(b'sparse', b'wb') as fh:
for p in sorted(profiles):
fh.write(b'%%include %s\n' % p)
if includes:
fh.write(b'[include]\n')
for i in sorted(includes):
fh.write(i)
fh.write(b'\n')
if excludes:
fh.write(b'[exclude]\n')
for e in sorted(excludes):
fh.write(e)
fh.write(b'\n')
repo._sparsesignaturecache.clear()
def readtemporaryincludes(repo):
raw = repo.vfs.tryread(b'tempsparse')
if not raw:
return set()
return set(raw.split(b'\n'))
def writetemporaryincludes(repo, includes):
repo.vfs.write(b'tempsparse', b'\n'.join(sorted(includes)))
repo._sparsesignaturecache.clear()
def addtemporaryincludes(repo, additional):
includes = readtemporaryincludes(repo)
for i in additional:
includes.add(i)
writetemporaryincludes(repo, includes)
def prunetemporaryincludes(repo):
if not enabled or not repo.vfs.exists(b'tempsparse'):
return
s = repo.status()
if s.modified or s.added or s.removed or s.deleted:
# Still have pending changes. Don't bother trying to prune.
return
sparsematch = matcher(repo, includetemp=False)
dirstate = repo.dirstate
mresult = mergemod.mergeresult()
dropped = []
tempincludes = readtemporaryincludes(repo)
for file in tempincludes:
if file in dirstate and not sparsematch(file):
message = _(b'dropping temporarily included sparse files')
mresult.addfile(file, mergestatemod.ACTION_REMOVE, None, message)
dropped.append(file)
mergemod.applyupdates(
repo, mresult, repo[None], repo[b'.'], False, wantfiledata=False
)
# Fix dirstate
for file in dropped:
dirstate.update_file(file, p1_tracked=False, wc_tracked=False)
repo.vfs.unlink(b'tempsparse')
repo._sparsesignaturecache.clear()
msg = _(
b'cleaned up %d temporarily added file(s) from the '
b'sparse checkout\n'
)
repo.ui.status(msg % len(tempincludes))
def forceincludematcher(matcher, includes):
"""Returns a matcher that returns true for any of the forced includes
before testing against the actual matcher."""
kindpats = [(b'path', include, b'') for include in includes]
includematcher = matchmod.includematcher(b'', kindpats)
return matchmod.unionmatcher([includematcher, matcher])
def matcher(repo, revs=None, includetemp=True):
"""Obtain a matcher for sparse working directories for the given revs.
If multiple revisions are specified, the matcher is the union of all
revs.
``includetemp`` indicates whether to use the temporary sparse profile.
"""
# If sparse isn't enabled, sparse matcher matches everything.
if not enabled:
return matchmod.always()
if not revs or revs == [None]:
revs = [
repo.changelog.rev(node)
for node in repo.dirstate.parents()
if node != repo.nullid
]
signature = configsignature(repo, includetemp=includetemp)
key = b'%s %s' % (signature, b' '.join(map(pycompat.bytestr, revs)))
result = repo._sparsematchercache.get(key)
if result:
return result
matchers = []
for rev in revs:
try:
includes, excludes, profiles = patternsforrev(repo, rev)
if includes or excludes:
matcher = matchmod.match(
repo.root,
b'',
[],
include=includes,
exclude=excludes,
default=b'relpath',
)
matchers.append(matcher)
except IOError:
pass
if not matchers:
result = matchmod.always()
elif len(matchers) == 1:
result = matchers[0]
else:
result = matchmod.unionmatcher(matchers)
if includetemp:
tempincludes = readtemporaryincludes(repo)
result = forceincludematcher(result, tempincludes)
repo._sparsematchercache[key] = result
return result
def filterupdatesactions(repo, wctx, mctx, branchmerge, mresult):
"""Filter updates to only lay out files that match the sparse rules."""
if not enabled:
return
oldrevs = [pctx.rev() for pctx in wctx.parents()]
oldsparsematch = matcher(repo, oldrevs)
if oldsparsematch.always():
return
files = set()
prunedactions = {}
if branchmerge:
# If we're merging, use the wctx filter, since we're merging into
# the wctx.
sparsematch = matcher(repo, [wctx.p1().rev()])
else:
# If we're updating, use the target context's filter, since we're
# moving to the target context.
sparsematch = matcher(repo, [mctx.rev()])
temporaryfiles = []
for file, action in mresult.filemap():
type, args, msg = action
files.add(file)
if sparsematch(file):
prunedactions[file] = action
elif type == mergestatemod.ACTION_MERGE:
temporaryfiles.append(file)
prunedactions[file] = action
elif branchmerge:
if type not in mergestatemod.NO_OP_ACTIONS:
temporaryfiles.append(file)
prunedactions[file] = action
elif type == mergestatemod.ACTION_FORGET:
prunedactions[file] = action
elif file in wctx:
prunedactions[file] = (mergestatemod.ACTION_REMOVE, args, msg)
# in case or rename on one side, it is possible that f1 might not
# be present in sparse checkout we should include it
# TODO: should we do the same for f2?
# exists as a separate check because file can be in sparse and hence
# if we try to club this condition in above `elif type == ACTION_MERGE`
# it won't be triggered
if branchmerge and type == mergestatemod.ACTION_MERGE:
f1, f2, fa, move, anc = args
if not sparsematch(f1):
temporaryfiles.append(f1)
if len(temporaryfiles) > 0:
repo.ui.status(
_(
b'temporarily included %d file(s) in the sparse '
b'checkout for merging\n'
)
% len(temporaryfiles)
)
addtemporaryincludes(repo, temporaryfiles)
# Add the new files to the working copy so they can be merged, etc
tmresult = mergemod.mergeresult()
message = b'temporarily adding to sparse checkout'
wctxmanifest = repo[None].manifest()
for file in temporaryfiles:
if file in wctxmanifest:
fctx = repo[None][file]
tmresult.addfile(
file,
mergestatemod.ACTION_GET,
(fctx.flags(), False),
message,
)
with repo.dirstate.parentchange():
mergemod.applyupdates(
repo,
tmresult,
repo[None],
repo[b'.'],
False,
wantfiledata=False,
)
dirstate = repo.dirstate
for file, flags, msg in tmresult.getactions(
[mergestatemod.ACTION_GET]
):
dirstate.update_file(file, p1_tracked=True, wc_tracked=True)
profiles = activeconfig(repo)[2]
changedprofiles = profiles & files
# If an active profile changed during the update, refresh the checkout.
# Don't do this during a branch merge, since all incoming changes should
# have been handled by the temporary includes above.
if changedprofiles and not branchmerge:
mf = mctx.manifest()
for file in mf:
old = oldsparsematch(file)
new = sparsematch(file)
if not old and new:
flags = mf.flags(file)
prunedactions[file] = (
mergestatemod.ACTION_GET,
(flags, False),
b'',
)
elif old and not new:
prunedactions[file] = (mergestatemod.ACTION_REMOVE, [], b'')
mresult.setactions(prunedactions)
def refreshwdir(repo, origstatus, origsparsematch, force=False):
"""Refreshes working directory by taking sparse config into account.
The old status and sparse matcher is compared against the current sparse
matcher.
Will abort if a file with pending changes is being excluded or included
unless ``force`` is True.
"""
# Verify there are no pending changes
pending = set()
pending.update(origstatus.modified)
pending.update(origstatus.added)
pending.update(origstatus.removed)
sparsematch = matcher(repo)
abort = False
for f in pending:
if not sparsematch(f):
repo.ui.warn(_(b"pending changes to '%s'\n") % f)
abort = not force
if abort:
raise error.Abort(
_(b'could not update sparseness due to pending changes')
)
# Calculate merge result
dirstate = repo.dirstate
ctx = repo[b'.']
added = []
lookup = []
dropped = []
mf = ctx.manifest()
files = set(mf)
mresult = mergemod.mergeresult()
for file in files:
old = origsparsematch(file)
new = sparsematch(file)
# Add files that are newly included, or that don't exist in
# the dirstate yet.
if (new and not old) or (old and new and not file in dirstate):
fl = mf.flags(file)
if repo.wvfs.exists(file):
mresult.addfile(file, mergestatemod.ACTION_EXEC, (fl,), b'')
lookup.append(file)
else:
mresult.addfile(
file, mergestatemod.ACTION_GET, (fl, False), b''
)
added.append(file)
# Drop files that are newly excluded, or that still exist in
# the dirstate.
elif (old and not new) or (not old and not new and file in dirstate):
dropped.append(file)
if file not in pending:
mresult.addfile(file, mergestatemod.ACTION_REMOVE, [], b'')
# Verify there are no pending changes in newly included files
abort = False
for file in lookup:
repo.ui.warn(_(b"pending changes to '%s'\n") % file)
abort = not force
if abort:
raise error.Abort(
_(
b'cannot change sparseness due to pending '
b'changes (delete the files or use '
b'--force to bring them back dirty)'
)
)
# Check for files that were only in the dirstate.
for file, state in pycompat.iteritems(dirstate):
if not file in files:
old = origsparsematch(file)
new = sparsematch(file)
if old and not new:
dropped.append(file)
mergemod.applyupdates(
repo, mresult, repo[None], repo[b'.'], False, wantfiledata=False
)
# Fix dirstate
for file in added:
dirstate.update_file(file, p1_tracked=True, wc_tracked=True)
for file in dropped:
dirstate.update_file(file, p1_tracked=False, wc_tracked=False)
for file in lookup:
# File exists on disk, and we're bringing it back in an unknown state.
dirstate.update_file(
file, p1_tracked=True, wc_tracked=True, possibly_dirty=True
)
return added, dropped, lookup
def aftercommit(repo, node):
"""Perform actions after a working directory commit."""
# This function is called unconditionally, even if sparse isn't
# enabled.
ctx = repo[node]
profiles = patternsforrev(repo, ctx.rev())[2]
# profiles will only have data if sparse is enabled.
if profiles & set(ctx.files()):
origstatus = repo.status()
origsparsematch = matcher(repo)
refreshwdir(repo, origstatus, origsparsematch, force=True)
prunetemporaryincludes(repo)
def _updateconfigandrefreshwdir(
repo, includes, excludes, profiles, force=False, removing=False
):
"""Update the sparse config and working directory state."""
raw = repo.vfs.tryread(b'sparse')
oldincludes, oldexcludes, oldprofiles = parseconfig(repo.ui, raw, b'sparse')
oldstatus = repo.status()
oldmatch = matcher(repo)
oldrequires = set(repo.requirements)
# TODO remove this try..except once the matcher integrates better
# with dirstate. We currently have to write the updated config
# because that will invalidate the matcher cache and force a
# re-read. We ideally want to update the cached matcher on the
# repo instance then flush the new config to disk once wdir is
# updated. But this requires massive rework to matcher() and its
# consumers.
if requirements.SPARSE_REQUIREMENT in oldrequires and removing:
repo.requirements.discard(requirements.SPARSE_REQUIREMENT)
scmutil.writereporequirements(repo)
elif requirements.SPARSE_REQUIREMENT not in oldrequires:
repo.requirements.add(requirements.SPARSE_REQUIREMENT)
scmutil.writereporequirements(repo)
try:
writeconfig(repo, includes, excludes, profiles)
return refreshwdir(repo, oldstatus, oldmatch, force=force)
except Exception:
if repo.requirements != oldrequires:
repo.requirements.clear()
repo.requirements |= oldrequires
scmutil.writereporequirements(repo)
writeconfig(repo, oldincludes, oldexcludes, oldprofiles)
raise
def clearrules(repo, force=False):
"""Clears include/exclude rules from the sparse config.
The remaining sparse config only has profiles, if defined. The working
directory is refreshed, as needed.
"""
with repo.wlock(), repo.dirstate.parentchange():
raw = repo.vfs.tryread(b'sparse')
includes, excludes, profiles = parseconfig(repo.ui, raw, b'sparse')
if not includes and not excludes:
return
_updateconfigandrefreshwdir(repo, set(), set(), profiles, force=force)
def importfromfiles(repo, opts, paths, force=False):
"""Import sparse config rules from files.
The updated sparse config is written out and the working directory
is refreshed, as needed.
"""
with repo.wlock(), repo.dirstate.parentchange():
# read current configuration
raw = repo.vfs.tryread(b'sparse')
includes, excludes, profiles = parseconfig(repo.ui, raw, b'sparse')
aincludes, aexcludes, aprofiles = activeconfig(repo)
# Import rules on top; only take in rules that are not yet
# part of the active rules.
changed = False
for p in paths:
with util.posixfile(util.expandpath(p), mode=b'rb') as fh:
raw = fh.read()
iincludes, iexcludes, iprofiles = parseconfig(
repo.ui, raw, b'sparse'
)
oldsize = len(includes) + len(excludes) + len(profiles)
includes.update(iincludes - aincludes)
excludes.update(iexcludes - aexcludes)
profiles.update(iprofiles - aprofiles)
if len(includes) + len(excludes) + len(profiles) > oldsize:
changed = True
profilecount = includecount = excludecount = 0
fcounts = (0, 0, 0)
if changed:
profilecount = len(profiles - aprofiles)
includecount = len(includes - aincludes)
excludecount = len(excludes - aexcludes)
fcounts = map(
len,
_updateconfigandrefreshwdir(
repo, includes, excludes, profiles, force=force
),
)
printchanges(
repo.ui, opts, profilecount, includecount, excludecount, *fcounts
)
def updateconfig(
repo,
pats,
opts,
include=False,
exclude=False,
reset=False,
delete=False,
enableprofile=False,
disableprofile=False,
force=False,
usereporootpaths=False,
):
"""Perform a sparse config update.
Only one of the actions may be performed.
The new config is written out and a working directory refresh is performed.
"""
with repo.wlock(), repo.dirstate.parentchange():
raw = repo.vfs.tryread(b'sparse')
oldinclude, oldexclude, oldprofiles = parseconfig(
repo.ui, raw, b'sparse'
)
if reset:
newinclude = set()
newexclude = set()
newprofiles = set()
else:
newinclude = set(oldinclude)
newexclude = set(oldexclude)
newprofiles = set(oldprofiles)
if any(os.path.isabs(pat) for pat in pats):
raise error.Abort(_(b'paths cannot be absolute'))
if not usereporootpaths:
# let's treat paths as relative to cwd
root, cwd = repo.root, repo.getcwd()
abspats = []
for kindpat in pats:
kind, pat = matchmod._patsplit(kindpat, None)
if kind in matchmod.cwdrelativepatternkinds or kind is None:
ap = (kind + b':' if kind else b'') + pathutil.canonpath(
root, cwd, pat
)
abspats.append(ap)
else:
abspats.append(kindpat)
pats = abspats
if include:
newinclude.update(pats)
elif exclude:
newexclude.update(pats)
elif enableprofile:
newprofiles.update(pats)
elif disableprofile:
newprofiles.difference_update(pats)
elif delete:
newinclude.difference_update(pats)
newexclude.difference_update(pats)
profilecount = len(newprofiles - oldprofiles) - len(
oldprofiles - newprofiles
)
includecount = len(newinclude - oldinclude) - len(
oldinclude - newinclude
)
excludecount = len(newexclude - oldexclude) - len(
oldexclude - newexclude
)
fcounts = map(
len,
_updateconfigandrefreshwdir(
repo,
newinclude,
newexclude,
newprofiles,
force=force,
removing=reset,
),
)
printchanges(
repo.ui, opts, profilecount, includecount, excludecount, *fcounts
)
def printchanges(
ui,
opts,
profilecount=0,
includecount=0,
excludecount=0,
added=0,
dropped=0,
conflicting=0,
):
"""Print output summarizing sparse config changes."""
with ui.formatter(b'sparse', opts) as fm:
fm.startitem()
fm.condwrite(
ui.verbose,
b'profiles_added',
_(b'Profiles changed: %d\n'),
profilecount,
)
fm.condwrite(
ui.verbose,
b'include_rules_added',
_(b'Include rules changed: %d\n'),
includecount,
)
fm.condwrite(
ui.verbose,
b'exclude_rules_added',
_(b'Exclude rules changed: %d\n'),
excludecount,
)
# In 'plain' verbose mode, mergemod.applyupdates already outputs what
# files are added or removed outside of the templating formatter
# framework. No point in repeating ourselves in that case.
if not fm.isplain():
fm.condwrite(
ui.verbose, b'files_added', _(b'Files added: %d\n'), added
)
fm.condwrite(
ui.verbose, b'files_dropped', _(b'Files dropped: %d\n'), dropped
)
fm.condwrite(
ui.verbose,
b'files_conflicting',
_(b'Files conflicting: %d\n'),
conflicting,
)