wireproto: separate commands tables for version 1 and 2 commands
We can't easily reuse existing command handlers for version 2
commands because the response types will be different. e.g. many
commands return nodes encoded as hex. Our new wire protocol is
binary safe, so we'll wish to encode nodes as binary.
We /could/ teach each command handler to look at the protocol
handler and change behavior based on the version in use. However,
this would make logic a bit unwieldy over time and would make
it harder to design a unified protocol handler interface. I think
it's better to create a clean break between version 1 and version 2
of commands on the server.
What I imagine happening is we will have separate @wireprotocommand
functions for each protocol generation. Those functions will parse the
request, dispatch to a common function to process it, then generate
the response in its own, transport-specific manner.
This commit establishes a separate table for tracking version 1
commands from version 2 commands. The HTTP server pieces have been
updated to use this new table.
Most commands are marked as both version 1 and version 2, so there is
little practical impact to this change.
A side-effect of this change is we now rely on transport registration
in wireprototypes.TRANSPORTS and certain properties of the protocol
interface. So a test had to be updated to conform.
Differential Revision: https://phab.mercurial-scm.org/D2982
$ cat <<EOF >> $HGRCPATH
> [extensions]
> mq =
> [diff]
> nodates = 1
> EOF
$ hg init a
$ cd a
$ mkdir 1 2
$ echo 'base' > 1/base
$ echo 'base' > 2/base
$ hg ci -Ambase
adding 1/base
adding 2/base
$ hg qnew -mmqbase mqbase
$ echo 'patched' > 1/base
$ echo 'patched' > 2/base
$ hg qrefresh
$ hg qdiff
diff -r e7af5904b465 1/base
--- a/1/base
+++ b/1/base
@@ -1,1 +1,1 @@
-base
+patched
diff -r e7af5904b465 2/base
--- a/2/base
+++ b/2/base
@@ -1,1 +1,1 @@
-base
+patched
$ hg qdiff .
diff -r e7af5904b465 1/base
--- a/1/base
+++ b/1/base
@@ -1,1 +1,1 @@
-base
+patched
diff -r e7af5904b465 2/base
--- a/2/base
+++ b/2/base
@@ -1,1 +1,1 @@
-base
+patched
$ cat .hg/patches/mqbase
# HG changeset patch
# Parent e7af5904b465cd1f4f3cf6b26fe14e8db6f63eaa
mqbase
diff -r e7af5904b465 1/base
--- a/1/base
+++ b/1/base
@@ -1,1 +1,1 @@
-base
+patched
diff -r e7af5904b465 2/base
--- a/2/base
+++ b/2/base
@@ -1,1 +1,1 @@
-base
+patched
$ echo 'patched again' > base
$ hg qrefresh 1
$ hg qdiff
diff -r e7af5904b465 1/base
--- a/1/base
+++ b/1/base
@@ -1,1 +1,1 @@
-base
+patched
diff -r e7af5904b465 2/base
--- a/2/base
+++ b/2/base
@@ -1,1 +1,1 @@
-base
+patched
$ hg qdiff .
diff -r e7af5904b465 1/base
--- a/1/base
+++ b/1/base
@@ -1,1 +1,1 @@
-base
+patched
diff -r e7af5904b465 2/base
--- a/2/base
+++ b/2/base
@@ -1,1 +1,1 @@
-base
+patched
$ cat .hg/patches/mqbase
# HG changeset patch
# Parent e7af5904b465cd1f4f3cf6b26fe14e8db6f63eaa
mqbase
diff -r e7af5904b465 1/base
--- a/1/base
+++ b/1/base
@@ -1,1 +1,1 @@
-base
+patched
qrefresh . in subdir:
$ ( cd 1 ; hg qrefresh . )
$ hg qdiff
diff -r e7af5904b465 1/base
--- a/1/base
+++ b/1/base
@@ -1,1 +1,1 @@
-base
+patched
diff -r e7af5904b465 2/base
--- a/2/base
+++ b/2/base
@@ -1,1 +1,1 @@
-base
+patched
$ hg qdiff .
diff -r e7af5904b465 1/base
--- a/1/base
+++ b/1/base
@@ -1,1 +1,1 @@
-base
+patched
diff -r e7af5904b465 2/base
--- a/2/base
+++ b/2/base
@@ -1,1 +1,1 @@
-base
+patched
$ cat .hg/patches/mqbase
# HG changeset patch
# Parent e7af5904b465cd1f4f3cf6b26fe14e8db6f63eaa
mqbase
diff -r e7af5904b465 1/base
--- a/1/base
+++ b/1/base
@@ -1,1 +1,1 @@
-base
+patched
qrefresh in hg-root again:
$ hg qrefresh
$ hg qdiff
diff -r e7af5904b465 1/base
--- a/1/base
+++ b/1/base
@@ -1,1 +1,1 @@
-base
+patched
diff -r e7af5904b465 2/base
--- a/2/base
+++ b/2/base
@@ -1,1 +1,1 @@
-base
+patched
$ hg qdiff .
diff -r e7af5904b465 1/base
--- a/1/base
+++ b/1/base
@@ -1,1 +1,1 @@
-base
+patched
diff -r e7af5904b465 2/base
--- a/2/base
+++ b/2/base
@@ -1,1 +1,1 @@
-base
+patched
$ cat .hg/patches/mqbase
# HG changeset patch
# Parent e7af5904b465cd1f4f3cf6b26fe14e8db6f63eaa
mqbase
diff -r e7af5904b465 1/base
--- a/1/base
+++ b/1/base
@@ -1,1 +1,1 @@
-base
+patched
diff -r e7af5904b465 2/base
--- a/2/base
+++ b/2/base
@@ -1,1 +1,1 @@
-base
+patched
qrefresh --short tests:
$ echo 'orphan' > orphanchild
$ hg add orphanchild
$ hg qrefresh nonexistentfilename # clear patch
nonexistentfilename: * (glob)
$ hg diff -c qtip
$ hg qrefresh --short 1/base
$ hg qrefresh --short 2/base
$ hg qdiff
diff -r e7af5904b465 1/base
--- a/1/base
+++ b/1/base
@@ -1,1 +1,1 @@
-base
+patched
diff -r e7af5904b465 2/base
--- a/2/base
+++ b/2/base
@@ -1,1 +1,1 @@
-base
+patched
diff -r e7af5904b465 orphanchild
--- /dev/null
+++ b/orphanchild
@@ -0,0 +1,1 @@
+orphan
$ cat .hg/patches/mqbase
# HG changeset patch
# Parent e7af5904b465cd1f4f3cf6b26fe14e8db6f63eaa
mqbase
diff -r e7af5904b465 1/base
--- a/1/base
+++ b/1/base
@@ -1,1 +1,1 @@
-base
+patched
diff -r e7af5904b465 2/base
--- a/2/base
+++ b/2/base
@@ -1,1 +1,1 @@
-base
+patched
$ hg st
A orphanchild
? base
diff shows what is not in patch:
$ hg diff
diff -r ???????????? orphanchild (glob)
--- /dev/null
+++ b/orphanchild
@@ -0,0 +1,1 @@
+orphan
Before starting exclusive tests:
$ cat .hg/patches/mqbase
# HG changeset patch
# Parent e7af5904b465cd1f4f3cf6b26fe14e8db6f63eaa
mqbase
diff -r e7af5904b465 1/base
--- a/1/base
+++ b/1/base
@@ -1,1 +1,1 @@
-base
+patched
diff -r e7af5904b465 2/base
--- a/2/base
+++ b/2/base
@@ -1,1 +1,1 @@
-base
+patched
Exclude 2/base:
$ hg qref -s -X 2/base
$ cat .hg/patches/mqbase
# HG changeset patch
# Parent e7af5904b465cd1f4f3cf6b26fe14e8db6f63eaa
mqbase
diff -r e7af5904b465 1/base
--- a/1/base
+++ b/1/base
@@ -1,1 +1,1 @@
-base
+patched
status shows 2/base as dirty:
$ hg status
M 2/base
A orphanchild
? base
Remove 1/base and add 2/base again but not orphanchild:
$ hg qref -s -X orphanchild -X 1/base 2/base orphanchild
$ cat .hg/patches/mqbase
# HG changeset patch
# Parent e7af5904b465cd1f4f3cf6b26fe14e8db6f63eaa
mqbase
diff -r e7af5904b465 2/base
--- a/2/base
+++ b/2/base
@@ -1,1 +1,1 @@
-base
+patched
Add 1/base with include filter - and thus remove 2/base from patch:
$ hg qref -s -I 1/ o* */*
$ cat .hg/patches/mqbase
# HG changeset patch
# Parent e7af5904b465cd1f4f3cf6b26fe14e8db6f63eaa
mqbase
diff -r e7af5904b465 1/base
--- a/1/base
+++ b/1/base
@@ -1,1 +1,1 @@
-base
+patched
$ cd ..
Test qrefresh --git losing copy metadata:
$ hg init repo
$ cd repo
$ echo "[diff]" >> .hg/hgrc
$ echo "git=True" >> .hg/hgrc
$ echo a > a
$ hg ci -Am adda
adding a
$ hg copy a ab
$ echo b >> ab
$ hg copy a ac
$ echo c >> ac
Capture changes:
$ hg qnew -f p1
$ hg qdiff
diff --git a/a b/ab
copy from a
copy to ab
--- a/a
+++ b/ab
@@ -1,1 +1,2 @@
a
+b
diff --git a/a b/ac
copy from a
copy to ac
--- a/a
+++ b/ac
@@ -1,1 +1,2 @@
a
+c
Refresh and check changes again:
$ hg qrefresh
$ hg qdiff
diff --git a/a b/ab
copy from a
copy to ab
--- a/a
+++ b/ab
@@ -1,1 +1,2 @@
a
+b
diff --git a/a b/ac
copy from a
copy to ac
--- a/a
+++ b/ac
@@ -1,1 +1,2 @@
a
+c
$ cd ..
Issue1441: qrefresh confused after hg rename:
$ hg init repo-1441
$ cd repo-1441
$ echo a > a
$ hg add a
$ hg qnew -f p
$ hg mv a b
$ hg qrefresh
$ hg qdiff
diff -r 000000000000 b
--- /dev/null
+++ b/b
@@ -0,0 +1,1 @@
+a
$ cd ..
Issue2025: qrefresh does not honor filtering options when tip !=
qtip:
$ hg init repo-2025
$ cd repo-2025
$ echo a > a
$ echo b > b
$ hg ci -qAm addab
$ echo a >> a
$ echo b >> b
$ hg qnew -f patch
$ hg up -qC 0
$ echo c > c
$ hg ci -qAm addc
$ hg up -qC 1
refresh with tip != qtip:
$ hg --config diff.nodates=1 qrefresh -I b
$ hg st
M a
$ cat b
b
b
$ cat .hg/patches/patch
# HG changeset patch
# Parent 1a60229be7ac3e4a7f647508e99b87bef1f03593
diff -r 1a60229be7ac b
--- a/b
+++ b/b
@@ -1,1 +1,2 @@
b
+b
$ cd ..
Issue1441 with git patches:
$ hg init repo-1441-git
$ cd repo-1441-git
$ echo "[diff]" >> .hg/hgrc
$ echo "git=True" >> .hg/hgrc
$ echo a > a
$ hg add a
$ hg qnew -f p
$ hg mv a b
$ hg qrefresh
$ hg qdiff --nodates
diff --git a/b b/b
new file mode 100644
--- /dev/null
+++ b/b
@@ -0,0 +1,1 @@
+a
$ cd ..
Refresh with bad usernames. Mercurial used to abort on bad usernames,
but only after writing the bad name into the patch.
$ hg init bad-usernames
$ cd bad-usernames
$ touch a
$ hg add a
$ hg qnew a
$ hg qrefresh -u 'foo
> bar'
transaction abort!
rollback completed
qrefresh interrupted while patch was popped! (revert --all, qpush to recover)
abort: username 'foo\nbar' contains a newline!
[255]
$ rm a
$ cat .hg/patches/a
# HG changeset patch
# Parent 0000000000000000000000000000000000000000
diff --git a/a b/a
new file mode 100644
$ hg qpush
applying a
now at: a
$ hg qrefresh -u ' '
transaction abort!
rollback completed
qrefresh interrupted while patch was popped! (revert --all, qpush to recover)
abort: empty username!
[255]
$ cat .hg/patches/a
# HG changeset patch
# Parent 0000000000000000000000000000000000000000
diff --git a/a b/a
new file mode 100644
$ cd ..
Refresh with phase data:
$ cd repo
$ echo 'babar' >> a
$ hg qnew -m 'update a' p2.diff
$ hg phase p2.diff
2: draft
$ echo 'beber' >> a
$ hg qref
$ hg phase p2.diff
2: draft
$ hg phase --force --secret p2.diff
$ echo 'bibir' >> a
$ hg qref
$ hg phase p2.diff
2: secret
$ cd ..