wireproto: separate commands tables for version 1 and 2 commands
We can't easily reuse existing command handlers for version 2
commands because the response types will be different. e.g. many
commands return nodes encoded as hex. Our new wire protocol is
binary safe, so we'll wish to encode nodes as binary.
We /could/ teach each command handler to look at the protocol
handler and change behavior based on the version in use. However,
this would make logic a bit unwieldy over time and would make
it harder to design a unified protocol handler interface. I think
it's better to create a clean break between version 1 and version 2
of commands on the server.
What I imagine happening is we will have separate @wireprotocommand
functions for each protocol generation. Those functions will parse the
request, dispatch to a common function to process it, then generate
the response in its own, transport-specific manner.
This commit establishes a separate table for tracking version 1
commands from version 2 commands. The HTTP server pieces have been
updated to use this new table.
Most commands are marked as both version 1 and version 2, so there is
little practical impact to this change.
A side-effect of this change is we now rely on transport registration
in wireprototypes.TRANSPORTS and certain properties of the protocol
interface. So a test had to be updated to conform.
Differential Revision: https://phab.mercurial-scm.org/D2982
#testcases flat tree
$ . "$TESTDIR/narrow-library.sh"
#if tree
$ cat << EOF >> $HGRCPATH
> [experimental]
> treemanifest = 1
> EOF
#endif
create full repo
$ hg init master
$ cd master
$ cat >> .hg/hgrc <<EOF
> [narrow]
> serveellipses=True
> EOF
$ mkdir inside
$ echo inside > inside/f1
$ mkdir outside
$ echo outside > outside/f1
$ hg ci -Aqm 'initial'
$ echo modified > inside/f1
$ hg ci -qm 'modify inside'
$ hg co -q 0
$ echo modified > outside/f1
$ hg ci -qm 'modify outside'
$ echo modified again >> outside/f1
$ hg ci -qm 'modify outside again'
$ cd ..
$ hg clone --narrow ssh://user@dummy/master narrow --include inside
requesting all changes
adding changesets
adding manifests
adding file changes
added 3 changesets with 2 changes to 1 files (+1 heads)
new changesets *:* (glob)
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd narrow
$ cat >> $HGRCPATH <<EOF
> [extensions]
> strip=
> EOF
Can strip and recover changesets affecting only files within narrow spec
$ hg co -r 'desc("modify inside")'
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm -f .hg/strip-backup/*-backup.hg
$ hg strip .
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
saved backup bundle to $TESTTMP/narrow/.hg/strip-backup/*-backup.hg (glob)
$ hg unbundle .hg/strip-backup/*-backup.hg
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files (+1 heads)
new changesets * (glob)
(run 'hg heads' to see heads, 'hg merge' to merge)
Can strip and recover changesets affecting files outside of narrow spec
$ hg co -r 'desc("modify outside")'
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg log -G -T '{rev} {desc}\n'
o 2 modify inside
|
| @ 1 modify outside again
|/
o 0 initial
$ hg debugdata -m 1
inside/f1\x004d6a634d5ba06331a60c29ee0db8412490a54fcd (esc) (flat !)
outside/f1\x0084ba604d54dee1f13310ce3d4ac2e8a36636691a (esc) (flat !)
inside\x006a8bc41df94075d501f9740587a0c0e13c170dc5t (esc) (tree !)
outside\x00255c2627ebdd3c7dcaa6945246f9b9f02bd45a09t (esc) (tree !)
$ rm -f .hg/strip-backup/*-backup.hg
$ hg strip .
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
saved backup bundle to $TESTTMP/narrow/.hg/strip-backup/*-backup.hg (glob)
$ hg unbundle .hg/strip-backup/*-backup.hg
adding changesets
adding manifests
adding file changes
added 1 changesets with 0 changes to 0 files (+1 heads)
new changesets * (glob)
(run 'hg heads' to see heads, 'hg merge' to merge)
$ hg log -G -T '{rev} {desc}\n'
o 2 modify outside again
|
| o 1 modify inside
|/
@ 0 initial
Check that hash of file outside narrow spec got restored
$ hg debugdata -m 2
inside/f1\x004d6a634d5ba06331a60c29ee0db8412490a54fcd (esc) (flat !)
outside/f1\x0084ba604d54dee1f13310ce3d4ac2e8a36636691a (esc) (flat !)
inside\x006a8bc41df94075d501f9740587a0c0e13c170dc5t (esc) (tree !)
outside\x00255c2627ebdd3c7dcaa6945246f9b9f02bd45a09t (esc) (tree !)
Also verify we can apply the bundle with 'hg pull':
$ hg co -r 'desc("modify inside")'
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm .hg/strip-backup/*-backup.hg
$ hg strip .
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
saved backup bundle to $TESTTMP/narrow/.hg/strip-backup/*-backup.hg (glob)
$ hg pull .hg/strip-backup/*-backup.hg
pulling from .hg/strip-backup/*-backup.hg (glob)
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files (+1 heads)
new changesets * (glob)
(run 'hg heads' to see heads, 'hg merge' to merge)
$ rm .hg/strip-backup/*-backup.hg
$ hg strip 0
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
saved backup bundle to $TESTTMP/narrow/.hg/strip-backup/*-backup.hg (glob)
$ hg incoming .hg/strip-backup/*-backup.hg
comparing with .hg/strip-backup/*-backup.hg (glob)
changeset: 0:* (glob)
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: initial
changeset: 1:9e48d953700d (flat !)
changeset: 1:3888164bccf0 (tree !)
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: modify outside again
changeset: 2:f505d5e96aa8 (flat !)
changeset: 2:40b66f95a209 (tree !)
tag: tip
parent: 0:a99f4d53924d (flat !)
parent: 0:c2a5fabcca3c (tree !)
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: modify inside
$ hg pull .hg/strip-backup/*-backup.hg
pulling from .hg/strip-backup/*-backup.hg (glob)
requesting all changes
adding changesets
adding manifests
adding file changes
added 3 changesets with 2 changes to 1 files (+1 heads)
new changesets *:* (glob)
(run 'hg heads' to see heads, 'hg merge' to merge)