branchmap: update cache of 'unserved' filter on new changesets
The `commitctx` and `addchangegroup` methods of repo upgrade branchcache after
completion. This behavior aims to keep the branchcache in sync for read only
process as hgweb. See ee317dbfb9d0 for details.
Since changelog filtering is used, those calls only update the cache for unfiltered repo.
One of no interest for typical read only process like hgweb.
Note: By chance in basic case, `repo.unfiltered() == repo.filtered('unserved')`
This changesets have the "unserved" cache updated instead. I think this is the
only cache that matter for hgweb.
We could imagine updating all possible branchcaches instead but:
- I'm not sure it would have any benefit impact. It may even increase the odd of
all cache being invalidated.
- This is more complicated change.
So I'm going for updating a single cache only which is already better that
updating a cache nobody cares about.
This changeset have a few expected impact on the testsuite are different cache
are updated.
# dagparser.py - parser and generator for concise description of DAGs
#
# Copyright 2010 Peter Arrenbrecht <peter@arrenbrecht.ch>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
import re, string
import util
from i18n import _
def parsedag(desc):
'''parses a DAG from a concise textual description; generates events
"+n" is a linear run of n nodes based on the current default parent
"." is a single node based on the current default parent
"$" resets the default parent to -1 (implied at the start);
otherwise the default parent is always the last node created
"<p" sets the default parent to the backref p
"*p" is a fork at parent p, where p is a backref
"*p1/p2/.../pn" is a merge of parents p1..pn, where the pi are backrefs
"/p2/.../pn" is a merge of the preceding node and p2..pn
":name" defines a label for the preceding node; labels can be redefined
"@text" emits an annotation event for text
"!command" emits an action event for the current node
"!!my command\n" is like "!", but to the end of the line
"#...\n" is a comment up to the end of the line
Whitespace between the above elements is ignored.
A backref is either
* a number n, which references the node curr-n, where curr is the current
node, or
* the name of a label you placed earlier using ":name", or
* empty to denote the default parent.
All string valued-elements are either strictly alphanumeric, or must
be enclosed in double quotes ("..."), with "\" as escape character.
Generates sequence of
('n', (id, [parentids])) for node creation
('l', (id, labelname)) for labels on nodes
('a', text) for annotations
('c', command) for actions (!)
('C', command) for line actions (!!)
Examples
--------
Example of a complex graph (output not shown for brevity):
>>> len(list(parsedag("""
...
... +3 # 3 nodes in linear run
... :forkhere # a label for the last of the 3 nodes from above
... +5 # 5 more nodes on one branch
... :mergethis # label again
... <forkhere # set default parent to labeled fork node
... +10 # 10 more nodes on a parallel branch
... @stable # following nodes will be annotated as "stable"
... +5 # 5 nodes in stable
... !addfile # custom command; could trigger new file in next node
... +2 # two more nodes
... /mergethis # merge last node with labeled node
... +4 # 4 more nodes descending from merge node
...
... """)))
34
Empty list:
>>> list(parsedag(""))
[]
A simple linear run:
>>> list(parsedag("+3"))
[('n', (0, [-1])), ('n', (1, [0])), ('n', (2, [1]))]
Some non-standard ways to define such runs:
>>> list(parsedag("+1+2"))
[('n', (0, [-1])), ('n', (1, [0])), ('n', (2, [1]))]
>>> list(parsedag("+1*1*"))
[('n', (0, [-1])), ('n', (1, [0])), ('n', (2, [1]))]
>>> list(parsedag("*"))
[('n', (0, [-1]))]
>>> list(parsedag("..."))
[('n', (0, [-1])), ('n', (1, [0])), ('n', (2, [1]))]
A fork and a join, using numeric back references:
>>> list(parsedag("+2*2*/2"))
[('n', (0, [-1])), ('n', (1, [0])), ('n', (2, [0])), ('n', (3, [2, 1]))]
>>> list(parsedag("+2<2+1/2"))
[('n', (0, [-1])), ('n', (1, [0])), ('n', (2, [0])), ('n', (3, [2, 1]))]
Placing a label:
>>> list(parsedag("+1 :mylabel +1"))
[('n', (0, [-1])), ('l', (0, 'mylabel')), ('n', (1, [0]))]
An empty label (silly, really):
>>> list(parsedag("+1:+1"))
[('n', (0, [-1])), ('l', (0, '')), ('n', (1, [0]))]
Fork and join, but with labels instead of numeric back references:
>>> list(parsedag("+1:f +1:p2 *f */p2"))
[('n', (0, [-1])), ('l', (0, 'f')), ('n', (1, [0])), ('l', (1, 'p2')),
('n', (2, [0])), ('n', (3, [2, 1]))]
>>> list(parsedag("+1:f +1:p2 <f +1 /p2"))
[('n', (0, [-1])), ('l', (0, 'f')), ('n', (1, [0])), ('l', (1, 'p2')),
('n', (2, [0])), ('n', (3, [2, 1]))]
Restarting from the root:
>>> list(parsedag("+1 $ +1"))
[('n', (0, [-1])), ('n', (1, [-1]))]
Annotations, which are meant to introduce sticky state for subsequent nodes:
>>> list(parsedag("+1 @ann +1"))
[('n', (0, [-1])), ('a', 'ann'), ('n', (1, [0]))]
>>> list(parsedag('+1 @"my annotation" +1'))
[('n', (0, [-1])), ('a', 'my annotation'), ('n', (1, [0]))]
Commands, which are meant to operate on the most recently created node:
>>> list(parsedag("+1 !cmd +1"))
[('n', (0, [-1])), ('c', 'cmd'), ('n', (1, [0]))]
>>> list(parsedag('+1 !"my command" +1'))
[('n', (0, [-1])), ('c', 'my command'), ('n', (1, [0]))]
>>> list(parsedag('+1 !!my command line\\n +1'))
[('n', (0, [-1])), ('C', 'my command line'), ('n', (1, [0]))]
Comments, which extend to the end of the line:
>>> list(parsedag('+1 # comment\\n+1'))
[('n', (0, [-1])), ('n', (1, [0]))]
Error:
>>> try: list(parsedag('+1 bad'))
... except Exception, e: print e
invalid character in dag description: bad...
'''
if not desc:
return
wordchars = string.ascii_letters + string.digits
labels = {}
p1 = -1
r = 0
def resolve(ref):
if not ref:
return p1
elif ref[0] in string.digits:
return r - int(ref)
else:
return labels[ref]
chiter = (c for c in desc)
def nextch():
try:
return chiter.next()
except StopIteration:
return '\0'
def nextrun(c, allow):
s = ''
while c in allow:
s += c
c = nextch()
return c, s
def nextdelimited(c, limit, escape):
s = ''
while c != limit:
if c == escape:
c = nextch()
s += c
c = nextch()
return nextch(), s
def nextstring(c):
if c == '"':
return nextdelimited(nextch(), '"', '\\')
else:
return nextrun(c, wordchars)
c = nextch()
while c != '\0':
while c in string.whitespace:
c = nextch()
if c == '.':
yield 'n', (r, [p1])
p1 = r
r += 1
c = nextch()
elif c == '+':
c, digs = nextrun(nextch(), string.digits)
n = int(digs)
for i in xrange(0, n):
yield 'n', (r, [p1])
p1 = r
r += 1
elif c in '*/':
if c == '*':
c = nextch()
c, pref = nextstring(c)
prefs = [pref]
while c == '/':
c, pref = nextstring(nextch())
prefs.append(pref)
ps = [resolve(ref) for ref in prefs]
yield 'n', (r, ps)
p1 = r
r += 1
elif c == '<':
c, ref = nextstring(nextch())
p1 = resolve(ref)
elif c == ':':
c, name = nextstring(nextch())
labels[name] = p1
yield 'l', (p1, name)
elif c == '@':
c, text = nextstring(nextch())
yield 'a', text
elif c == '!':
c = nextch()
if c == '!':
cmd = ''
c = nextch()
while c not in '\n\r\0':
cmd += c
c = nextch()
yield 'C', cmd
else:
c, cmd = nextstring(c)
yield 'c', cmd
elif c == '#':
while c not in '\n\r\0':
c = nextch()
elif c == '$':
p1 = -1
c = nextch()
elif c == '\0':
return # in case it was preceded by whitespace
else:
s = ''
i = 0
while c != '\0' and i < 10:
s += c
i += 1
c = nextch()
raise util.Abort(_('invalid character in dag description: '
'%s...') % s)
def dagtextlines(events,
addspaces=True,
wraplabels=False,
wrapannotations=False,
wrapcommands=False,
wrapnonlinear=False,
usedots=False,
maxlinewidth=70):
'''generates single lines for dagtext()'''
def wrapstring(text):
if re.match("^[0-9a-z]*$", text):
return text
return '"' + text.replace('\\', '\\\\').replace('"', '\"') + '"'
def gen():
labels = {}
run = 0
wantr = 0
needroot = False
for kind, data in events:
if kind == 'n':
r, ps = data
# sanity check
if r != wantr:
raise util.Abort(_("expected id %i, got %i") % (wantr, r))
if not ps:
ps = [-1]
else:
for p in ps:
if p >= r:
raise util.Abort(_("parent id %i is larger than "
"current id %i") % (p, r))
wantr += 1
# new root?
p1 = r - 1
if len(ps) == 1 and ps[0] == -1:
if needroot:
if run:
yield '+' + str(run)
run = 0
if wrapnonlinear:
yield '\n'
yield '$'
p1 = -1
else:
needroot = True
if len(ps) == 1 and ps[0] == p1:
if usedots:
yield "."
else:
run += 1
else:
if run:
yield '+' + str(run)
run = 0
if wrapnonlinear:
yield '\n'
prefs = []
for p in ps:
if p == p1:
prefs.append('')
elif p in labels:
prefs.append(labels[p])
else:
prefs.append(str(r - p))
yield '*' + '/'.join(prefs)
else:
if run:
yield '+' + str(run)
run = 0
if kind == 'l':
rid, name = data
labels[rid] = name
yield ':' + name
if wraplabels:
yield '\n'
elif kind == 'c':
yield '!' + wrapstring(data)
if wrapcommands:
yield '\n'
elif kind == 'C':
yield '!!' + data
yield '\n'
elif kind == 'a':
if wrapannotations:
yield '\n'
yield '@' + wrapstring(data)
elif kind == '#':
yield '#' + data
yield '\n'
else:
raise util.Abort(_("invalid event type in dag: %s")
% str((type, data)))
if run:
yield '+' + str(run)
line = ''
for part in gen():
if part == '\n':
if line:
yield line
line = ''
else:
if len(line) + len(part) >= maxlinewidth:
yield line
line = ''
elif addspaces and line and part != '.':
line += ' '
line += part
if line:
yield line
def dagtext(dag,
addspaces=True,
wraplabels=False,
wrapannotations=False,
wrapcommands=False,
wrapnonlinear=False,
usedots=False,
maxlinewidth=70):
'''generates lines of a textual representation for a dag event stream
events should generate what parsedag() does, so:
('n', (id, [parentids])) for node creation
('l', (id, labelname)) for labels on nodes
('a', text) for annotations
('c', text) for commands
('C', text) for line commands ('!!')
('#', text) for comment lines
Parent nodes must come before child nodes.
Examples
--------
Linear run:
>>> dagtext([('n', (0, [-1])), ('n', (1, [0]))])
'+2'
Two roots:
>>> dagtext([('n', (0, [-1])), ('n', (1, [-1]))])
'+1 $ +1'
Fork and join:
>>> dagtext([('n', (0, [-1])), ('n', (1, [0])), ('n', (2, [0])),
... ('n', (3, [2, 1]))])
'+2 *2 */2'
Fork and join with labels:
>>> dagtext([('n', (0, [-1])), ('l', (0, 'f')), ('n', (1, [0])),
... ('l', (1, 'p2')), ('n', (2, [0])), ('n', (3, [2, 1]))])
'+1 :f +1 :p2 *f */p2'
Annotations:
>>> dagtext([('n', (0, [-1])), ('a', 'ann'), ('n', (1, [0]))])
'+1 @ann +1'
>>> dagtext([('n', (0, [-1])),
... ('a', 'my annotation'),
... ('n', (1, [0]))])
'+1 @"my annotation" +1'
Commands:
>>> dagtext([('n', (0, [-1])), ('c', 'cmd'), ('n', (1, [0]))])
'+1 !cmd +1'
>>> dagtext([('n', (0, [-1])), ('c', 'my command'), ('n', (1, [0]))])
'+1 !"my command" +1'
>>> dagtext([('n', (0, [-1])),
... ('C', 'my command line'),
... ('n', (1, [0]))])
'+1 !!my command line\\n+1'
Comments:
>>> dagtext([('n', (0, [-1])), ('#', ' comment'), ('n', (1, [0]))])
'+1 # comment\\n+1'
>>> dagtext([])
''
Combining parsedag and dagtext:
>>> dagtext(parsedag('+1 :f +1 :p2 *f */p2'))
'+1 :f +1 :p2 *f */p2'
'''
return "\n".join(dagtextlines(dag,
addspaces,
wraplabels,
wrapannotations,
wrapcommands,
wrapnonlinear,
usedots,
maxlinewidth))