censor: make censor acquire locks before processing
Before this patch, "hg censor" executes below:
- without acquisition of wlock, examine whether the working
directory refers the revision of the file to be censored or not
- without acquisition of store lock (slock), replace existing
filelog of file to be censored with censored one,
Replacement consists of steps below, and it is assumed that the
destination filelog at (1) isn't changed before renaming at (3).
1. read existing filelog in
2. write filelog entries (both censored and not) into temporary file
3. rename from temporary file to existing filelog to be censored
It may cause unintentional result, if another command runs parallelly
(see also issue4368).
This patch makes "hg censor" acquire wlock and slock before
processing.
test for old histedit issue #6:
editing a changeset without any actual change would corrupt the repository
$ . "$TESTDIR/histedit-helpers.sh"
$ cat >> $HGRCPATH <<EOF
> [extensions]
> histedit=
> EOF
$ initrepo ()
> {
> dir="$1"
> comment="$2"
> if [ -n "${comment}" ]; then
> echo % ${comment}
> echo % ${comment} | sed 's:.:-:g'
> fi
> hg init ${dir}
> cd ${dir}
> for x in a b c d e f ; do
> echo $x > $x
> hg add $x
> hg ci -m $x
> done
> cd ..
> }
$ geneditor ()
> {
> # generate an editor script for selecting changesets to be edited
> choice=$1 # changesets that should be edited (using sed line ranges)
> cat <<EOF | sed 's:^....::'
> # editing the rules, replacing 'pick' with 'edit' for the chosen lines
> sed '${choice}s:^pick:edit:' "\$1" > "\${1}.tmp"
> mv "\${1}.tmp" "\$1"
> # displaying the resulting rules, minus comments and empty lines
> sed '/^#/d;/^$/d;s:^:| :' "\$1" >&2
> EOF
> }
$ startediting ()
> {
> # begin an editing session
> choice="$1" # changesets that should be edited
> number="$2" # number of changesets considered (from tip)
> comment="$3"
> geneditor "${choice}" > edit.sh
> echo % start editing the history ${comment}
> HGEDITOR="sh ./edit.sh" hg histedit -- -${number} 2>&1 | fixbundle
> }
$ continueediting ()
> {
> # continue an edit already in progress
> editor="$1" # message editor when finalizing editing
> comment="$2"
> echo % finalize changeset editing ${comment}
> HGEDITOR=${editor} hg histedit --continue 2>&1 | fixbundle
> }
$ graphlog ()
> {
> comment="${1:-log}"
> echo % "${comment}"
> hg log -G --template '{rev} {node} \"{desc|firstline}\"\n'
> }
$ initrepo r1 "test editing with no change"
% test editing with no change
-----------------------------
$ cd r1
$ graphlog "log before editing"
% log before editing
@ 5 652413bf663ef2a641cab26574e46d5f5a64a55a "f"
|
o 4 e860deea161a2f77de56603b340ebbb4536308ae "e"
|
o 3 055a42cdd88768532f9cf79daa407fc8d138de9b "d"
|
o 2 177f92b773850b59254aa5e923436f921b55483b "c"
|
o 1 d2ae7f538514cd87c17547b0de4cea71fe1af9fb "b"
|
o 0 cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b "a"
$ startediting 2 3 "(not changing anything)" # edit the 2nd of 3 changesets
% start editing the history (not changing anything)
| pick 055a42cdd887 3 d
| edit e860deea161a 4 e
| pick 652413bf663e 5 f
0 files updated, 0 files merged, 2 files removed, 0 files unresolved
Make changes as needed, you may commit or record as needed now.
When you are finished, run hg histedit --continue to resume.
$ continueediting true "(leaving commit message unaltered)"
% finalize changeset editing (leaving commit message unaltered)
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
check state of working copy
$ hg id
794fe033d0a0 tip
$ graphlog "log after history editing"
% log after history editing
@ 5 794fe033d0a030f8df77c5de945fca35c9181c30 "f"
|
o 4 04d2fab980779f332dec458cc944f28de8b43435 "e"
|
o 3 055a42cdd88768532f9cf79daa407fc8d138de9b "d"
|
o 2 177f92b773850b59254aa5e923436f921b55483b "c"
|
o 1 d2ae7f538514cd87c17547b0de4cea71fe1af9fb "b"
|
o 0 cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b "a"
$ cd ..
$ initrepo r2 "test editing with no change, then abort"
% test editing with no change, then abort
-----------------------------------------
$ cd r2
$ graphlog "log before editing"
% log before editing
@ 5 652413bf663ef2a641cab26574e46d5f5a64a55a "f"
|
o 4 e860deea161a2f77de56603b340ebbb4536308ae "e"
|
o 3 055a42cdd88768532f9cf79daa407fc8d138de9b "d"
|
o 2 177f92b773850b59254aa5e923436f921b55483b "c"
|
o 1 d2ae7f538514cd87c17547b0de4cea71fe1af9fb "b"
|
o 0 cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b "a"
$ startediting 1,2 3 "(not changing anything)" # edit the 1st two of 3 changesets
% start editing the history (not changing anything)
| edit 055a42cdd887 3 d
| edit e860deea161a 4 e
| pick 652413bf663e 5 f
0 files updated, 0 files merged, 3 files removed, 0 files unresolved
Make changes as needed, you may commit or record as needed now.
When you are finished, run hg histedit --continue to resume.
$ continueediting true "(leaving commit message unaltered)"
% finalize changeset editing (leaving commit message unaltered)
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
Make changes as needed, you may commit or record as needed now.
When you are finished, run hg histedit --continue to resume.
$ graphlog "log after first edit"
% log after first edit
@ 6 e5ae3ca2f1ffdbd89ec41ebc273a231f7c3022f2 "d"
|
| o 5 652413bf663ef2a641cab26574e46d5f5a64a55a "f"
| |
| o 4 e860deea161a2f77de56603b340ebbb4536308ae "e"
| |
| o 3 055a42cdd88768532f9cf79daa407fc8d138de9b "d"
|/
o 2 177f92b773850b59254aa5e923436f921b55483b "c"
|
o 1 d2ae7f538514cd87c17547b0de4cea71fe1af9fb "b"
|
o 0 cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b "a"
abort editing session, after first forcibly updating away
$ hg up 0
abort: histedit in progress
(use 'hg histedit --continue' or 'hg histedit --abort')
[255]
$ mv .hg/histedit-state .hg/histedit-state-ignore
$ hg up 0
0 files updated, 0 files merged, 3 files removed, 0 files unresolved
$ mv .hg/histedit-state-ignore .hg/histedit-state
$ hg sum
parent: 0:cb9a9f314b8b
a
branch: default
commit: 1 added, 1 unknown (new branch head)
update: 6 new changesets (update)
phases: 7 draft
hist: 2 remaining (histedit --continue)
$ hg histedit --abort 2>&1 | fixbundle
[1]
modified files should survive the abort when we've moved away already
$ hg st
A e
? edit.sh
$ graphlog "log after abort"
% log after abort
o 5 652413bf663ef2a641cab26574e46d5f5a64a55a "f"
|
o 4 e860deea161a2f77de56603b340ebbb4536308ae "e"
|
o 3 055a42cdd88768532f9cf79daa407fc8d138de9b "d"
|
o 2 177f92b773850b59254aa5e923436f921b55483b "c"
|
o 1 d2ae7f538514cd87c17547b0de4cea71fe1af9fb "b"
|
@ 0 cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b "a"
$ cd ..