perf: quiet stdout output in perf::unbundle
There a lot of repetitive bundle application message we do not care about.
Test transaction safety
=======================
#testcases revlogv1 revlogv2 changelogv2
#if revlogv1
$ cat << EOF >> $HGRCPATH
> [experimental]
> revlogv2=no
> EOF
#endif
#if revlogv2
$ cat << EOF >> $HGRCPATH
> [experimental]
> revlogv2=enable-unstable-format-and-corrupt-my-data
> EOF
#endif
#if changelogv2
$ cat << EOF >> $HGRCPATH
> [format]
> exp-use-changelog-v2=enable-unstable-format-and-corrupt-my-data
> EOF
#endif
This test basic case to make sure external process do not see transaction
content until it is committed.
# TODO: also add an external reader accessing revlog files while they are written
# (instead of during transaction finalisation)
# TODO: also add stream clone and hardlink clone happening during these transaction.
setup
-----
synchronisation+output script using the following schedule:
[A1] "external" is started
[A2] "external" waits on EXT_UNLOCK
[A2] "external" + creates EXT_WAITING → unlocks [C1]
[B1] "hg commit/pull" is started
[B2] "hg commit/pull" is ready to be committed
[B3] "hg commit/pull" spawn "internal" using a pretxnclose hook (need [C4])
[C1] "internal" waits on EXT_WAITING (need [A2])
[C2] "internal" creates EXT_UNLOCK → unlocks [A2]
[C3] "internal" show the tipmost revision (inside of the transaction)
[C4] "internal" waits on EXT_DONE (need [A4])
[A3] "external" show the tipmost revision (outside of the transaction)
[A4] "external" creates EXT_DONE → unlocks [C4]
[C5] "internal" end of execution -> unlock [B3]
[B4] "hg commit/pull" transaction is committed on disk
$ mkdir sync
$ mkdir output
$ mkdir script
$ HG_TEST_FILE_EXT_WAITING=$TESTTMP/sync/ext_waiting
$ export HG_TEST_FILE_EXT_WAITING
$ HG_TEST_FILE_EXT_UNLOCK=$TESTTMP/sync/ext_unlock
$ export HG_TEST_FILE_EXT_UNLOCK
$ HG_TEST_FILE_EXT_DONE=$TESTTMP/sync/ext_done
$ export HG_TEST_FILE_EXT_DONE
$ cat << EOF > script/external.sh
> #!/bin/sh
> "$RUNTESTDIR/testlib/wait-on-file" 5 "$HG_TEST_FILE_EXT_UNLOCK" "$HG_TEST_FILE_EXT_WAITING"
> hg log --rev 'tip' -T 'external: {rev} {desc}\n' > "$TESTTMP/output/external.out"
> touch "$HG_TEST_FILE_EXT_DONE"
> EOF
$ cat << EOF > script/internal.sh
> #!/bin/sh
> "$RUNTESTDIR/testlib/wait-on-file" 5 "$HG_TEST_FILE_EXT_WAITING"
> touch "$HG_TEST_FILE_EXT_UNLOCK"
> hg log --rev 'tip' -T 'internal: {rev} {desc}\n' > "$TESTTMP/output/internal.out"
> "$RUNTESTDIR/testlib/wait-on-file" 5 "$HG_TEST_FILE_EXT_DONE"
> EOF
Automated commands:
$ make_one_commit() {
> rm -f $TESTTMP/sync/*
> rm -f $TESTTMP/output/*
> hg log --rev 'tip' -T 'pre-commit: {rev} {desc}\n'
> echo x >> a
> sh $TESTTMP/script/external.sh & hg commit -m "$1"
> cat $TESTTMP/output/external.out
> cat $TESTTMP/output/internal.out
> hg log --rev 'tip' -T 'post-tr: {rev} {desc}\n'
> }
$ make_one_pull() {
> rm -f $TESTTMP/sync/*
> rm -f $TESTTMP/output/*
> hg log --rev 'tip' -T 'pre-commit: {rev} {desc}\n'
> echo x >> a
> sh $TESTTMP/script/external.sh & hg pull ../other-repo/ --rev "$1" --force --quiet
> cat $TESTTMP/output/external.out
> cat $TESTTMP/output/internal.out
> hg log --rev 'tip' -T 'post-tr: {rev} {desc}\n'
> }
prepare a large source to which to pull from:
The source is large to unsure we don't use inline more after the pull
$ hg init other-repo
$ hg -R other-repo debugbuilddag .+500
prepare an empty repository where to make test:
$ hg init repo
$ cd repo
$ touch a
$ hg add a
prepare a small extension to controll inline size
$ mkdir $TESTTMP/ext
$ cat << EOF > $TESTTMP/ext/small_inline.py
> from mercurial import revlog
> revlog._maxinline = 64 * 100
> EOF
$ cat << EOF >> $HGRCPATH
> [extensions]
> small_inline=$TESTTMP/ext/small_inline.py
> [hooks]
> pretxnclose = sh $TESTTMP/script/internal.sh
> EOF
check this is true for the initial commit (inline → inline)
-----------------------------------------------------------
the repository should still be inline (for relevant format)
$ make_one_commit first
pre-commit: -1
external: -1
internal: 0 first
post-tr: 0 first
#if revlogv1
$ hg debugrevlog -c | grep inline
flags : inline
#endif
check this is true for extra commit (inline → inline)
-----------------------------------------------------
the repository should still be inline (for relevant format)
#if revlogv1
$ hg debugrevlog -c | grep inline
flags : inline
#endif
$ make_one_commit second
pre-commit: 0 first
external: 0 first
internal: 1 second
post-tr: 1 second
#if revlogv1
$ hg debugrevlog -c | grep inline
flags : inline
#endif
check this is true for a small pull (inline → inline)
-----------------------------------------------------
the repository should still be inline (for relevant format)
#if revlogv1
$ hg debugrevlog -c | grep inline
flags : inline
#endif
$ make_one_pull 3
pre-commit: 1 second
warning: repository is unrelated
external: 1 second
internal: 5 r3
post-tr: 5 r3
#if revlogv1
$ hg debugrevlog -c | grep inline
flags : inline
#endif
Make a large pull (inline → no-inline)
---------------------------------------
the repository should no longer be inline (for relevant format)
#if revlogv1
$ hg debugrevlog -c | grep inline
flags : inline
#endif
$ make_one_pull 400
pre-commit: 5 r3
external: 5 r3
internal: 402 r400
post-tr: 402 r400
#if revlogv1
$ hg debugrevlog -c | grep inline
[1]
#endif
check this is true for extra commit (no-inline → no-inline)
-----------------------------------------------------------
the repository should no longer be inline (for relevant format)
#if revlogv1
$ hg debugrevlog -c | grep inline
[1]
#endif
$ make_one_commit third
pre-commit: 402 r400
external: 402 r400
internal: 403 third
post-tr: 403 third
#if revlogv1
$ hg debugrevlog -c | grep inline
[1]
#endif
Make a pull (not-inline → no-inline)
-------------------------------------
the repository should no longer be inline (for relevant format)
#if revlogv1
$ hg debugrevlog -c | grep inline
[1]
#endif
$ make_one_pull tip
pre-commit: 403 third
external: 403 third
internal: 503 r500
post-tr: 503 r500
#if revlogv1
$ hg debugrevlog -c | grep inline
[1]
#endif