Mercurial > hg-stable
view tests/test-ssh-proto.t @ 51892:5baa52ca4932
rust-inner-revlog: always inline `get_entry`
This is a very hot function.
| author | Pierre-Yves David <pierre-yves.david@octobus.net> |
|---|---|
| date | Thu, 12 Sep 2024 10:09:06 +0200 |
| parents | a746d13987a6 |
| children |
line wrap: on
line source
#require no-chg persistent-nodemap is not enabled by default. It is not relevant for this test so disable it. $ cat << EOF >> $HGRCPATH > [format] > use-persistent-nodemap = no > EOF Helper function to run protocol tests against multiple protocol versions. This is easier than using #testcases because managing differences between protocols with inline conditional output is hard to read. $ debugwireproto() { > commands=`cat -` > echo 'testing ssh1' > echo "${commands}" | hg --verbose debugwireproto --localssh > } $ cat >> $HGRCPATH << EOF > [devel] > debug.peer-request = true > [extensions] > sshprotoext = $TESTDIR/sshprotoext.py > EOF $ hg init server $ cd server $ echo 0 > foo $ hg -q add foo $ hg commit -m initial A no-op connection performs a handshake $ hg debugwireproto --localssh << EOF > EOF creating ssh peer from handshake results Raw peers don't perform any activity $ hg debugwireproto --localssh --peer raw << EOF > EOF using raw connection to peer $ hg debugwireproto --localssh --peer ssh1 << EOF > EOF creating ssh peer for wire protocol version 1 Test a normal behaving server, for sanity $ cd .. $ hg --debug debugpeer ssh://user@dummy/server running .* ".*[/\\]dummyssh" ['"]user@dummy['"] ['"]hg -R server serve --stdio['"] (re) devel-peer-request: hello+between devel-peer-request: pairs: 81 bytes sending hello command sending between command remote: \d+ (re) remote: capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash (re) remote: 1 devel-peer-request: protocaps devel-peer-request: caps: * bytes (glob) sending protocaps command url: ssh://user@dummy/server local: no pushable: yes Server should answer the "hello" command in isolation $ hg -R server debugwireproto --localssh --peer raw << EOF > raw > hello\n > readline > readline > EOF using raw connection to peer i> write(6) -> 6: i> hello\n o> readline() -> 4: o> \d+\\n (re) o> readline\(\) -> \d+: (re) o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re) `hg debugserve --sshstdio` works $ cd server $ hg debugserve --sshstdio << EOF > hello > EOF \d+ (re) capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash (re) I/O logging works $ hg debugserve --sshstdio --logiofd 1 << EOF > hello > EOF e> flush() -> None o> write(4) -> 4: o> \d+\\n (re) o> write\(\d+\) -> \d+: (re) o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re) \d+ (re) capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash (re) o> flush() -> None $ hg debugserve --sshstdio --logiofile $TESTTMP/io << EOF > hello > EOF \d+ (re) capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash (re) $ cat $TESTTMP/io e> flush() -> None o> write(4) -> 4: o> \d+\\n (re) o> write\(\d+\) -> \d+: (re) o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re) o> flush() -> None $ cd .. >=0.9.1 clients send a "hello" + "between" for the null range as part of handshake. Server should reply with capabilities and should send "1\n\n" as a successful reply with empty response to the "between". $ hg -R server debugwireproto --localssh --peer raw << EOF > raw > hello\n > readline > readline > raw > between\n > pairs 81\n > 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000 > readline > readline > EOF using raw connection to peer i> write(6) -> 6: i> hello\n o> readline() -> 4: o> \d+\\n (re) o> readline\(\) -> \d+: (re) o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re) i> write(98) -> 98: i> between\n i> pairs 81\n i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000 o> readline() -> 2: o> 1\n o> readline() -> 1: o> \n SSH banner is not printed by default, ignored by clients $ SSHSERVERMODE=banner hg debugpeer ssh://user@dummy/server url: ssh://user@dummy/server local: no pushable: yes --debug will print the banner $ SSHSERVERMODE=banner hg --debug debugpeer ssh://user@dummy/server running .* ".*[/\\]dummyssh" ['"]user@dummy['"] ['"]hg -R server serve --stdio['"] (re) devel-peer-request: hello+between devel-peer-request: pairs: 81 bytes sending hello command sending between command remote: banner: line 0 remote: banner: line 1 remote: banner: line 2 remote: banner: line 3 remote: banner: line 4 remote: banner: line 5 remote: banner: line 6 remote: banner: line 7 remote: banner: line 8 remote: banner: line 9 remote: \d+ (re) remote: capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash (re) remote: 1 devel-peer-request: protocaps devel-peer-request: caps: * bytes (glob) sending protocaps command url: ssh://user@dummy/server local: no pushable: yes And test the banner with the raw protocol $ SSHSERVERMODE=banner hg -R server debugwireproto --localssh --peer raw << EOF > raw > hello\n > readline > readline > readline > readline > readline > readline > readline > readline > readline > readline > readline > readline > raw > between\n > pairs 81\n > 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000 > readline > readline > EOF using raw connection to peer i> write(6) -> 6: i> hello\n o> readline() -> 15: o> banner: line 0\n o> readline() -> 15: o> banner: line 1\n o> readline() -> 15: o> banner: line 2\n o> readline() -> 15: o> banner: line 3\n o> readline() -> 15: o> banner: line 4\n o> readline() -> 15: o> banner: line 5\n o> readline() -> 15: o> banner: line 6\n o> readline() -> 15: o> banner: line 7\n o> readline() -> 15: o> banner: line 8\n o> readline() -> 15: o> banner: line 9\n o> readline() -> 4: o> \d+\\n (re) o> readline\(\) -> \d+: (re) o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re) i> write(98) -> 98: i> between\n i> pairs 81\n i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000 o> readline() -> 2: o> 1\n o> readline() -> 1: o> \n Connecting to a <0.9.1 server that doesn't support the hello command. The client should refuse, as we dropped support for connecting to such servers. $ SSHSERVERMODE=no-hello hg --debug debugpeer ssh://user@dummy/server running .* ".*[/\\]dummyssh" ['"]user@dummy['"] ['"]hg -R server serve --stdio['"] (re) devel-peer-request: hello+between devel-peer-request: pairs: 81 bytes sending hello command sending between command remote: 0 remote: 1 abort: no suitable response from remote hg [255] Sending an unknown command to the server results in an empty response to that command $ hg -R server debugwireproto --localssh --peer raw << EOF > raw > pre-hello\n > readline > raw > hello\n > readline > raw > between\n > pairs 81\n > 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000 > readline > readline > EOF using raw connection to peer i> write(10) -> 10: i> pre-hello\n o> readline() -> 2: o> 0\n i> write(6) -> 6: i> hello\n o> readline() -> 4: o> \d+\\n (re) i> write(98) -> 98: i> between\n i> pairs 81\n i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000 o> readline\(\) -> \d+: (re) o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re) o> readline() -> 2: o> 1\n $ hg --config sshpeer.mode=extra-handshake-commands --config sshpeer.handshake-mode=pre-no-args --debug debugpeer ssh://user@dummy/server running .* ".*[/\\]dummyssh" ['"]user@dummy['"] ['"]hg -R server serve --stdio['"] (re) sending no-args command devel-peer-request: hello+between devel-peer-request: pairs: 81 bytes sending hello command sending between command remote: 0 remote: \d+ (re) remote: capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash (re) remote: 1 devel-peer-request: protocaps devel-peer-request: caps: * bytes (glob) sending protocaps command url: ssh://user@dummy/server local: no pushable: yes Send multiple unknown commands before hello $ hg -R server debugwireproto --localssh --peer raw << EOF > raw > unknown1\n > readline > raw > unknown2\n > readline > raw > unknown3\n > readline > raw > hello\n > readline > readline > raw > between\n > pairs 81\n > 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000 > readline > readline > EOF using raw connection to peer i> write(9) -> 9: i> unknown1\n o> readline() -> 2: o> 0\n i> write(9) -> 9: i> unknown2\n o> readline() -> 2: o> 0\n i> write(9) -> 9: i> unknown3\n o> readline() -> 2: o> 0\n i> write(6) -> 6: i> hello\n o> readline() -> 4: o> \d+\\n (re) o> readline\(\) -> \d+: (re) o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re) i> write(98) -> 98: i> between\n i> pairs 81\n i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000 o> readline() -> 2: o> 1\n o> readline() -> 1: o> \n $ hg --config sshpeer.mode=extra-handshake-commands --config sshpeer.handshake-mode=pre-multiple-no-args --debug debugpeer ssh://user@dummy/server running .* ".*[/\\]dummyssh" ['"]user@dummy['"] ['"]hg -R server serve --stdio['"] (re) sending unknown1 command sending unknown2 command sending unknown3 command devel-peer-request: hello+between devel-peer-request: pairs: 81 bytes sending hello command sending between command remote: 0 remote: 0 remote: 0 remote: \d+ (re) remote: capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash (re) remote: 1 devel-peer-request: protocaps devel-peer-request: caps: * bytes (glob) sending protocaps command url: ssh://user@dummy/server local: no pushable: yes Send an unknown command before hello that has arguments $ cd server $ hg debugwireproto --localssh --peer raw << EOF > raw > with-args\n > foo 13\n > value for foo\n > bar 13\n > value for bar\n > readline > readline > readline > readline > readline > raw > hello\n > readline > readline > raw > between\n > pairs 81\n > 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000 > readline > readline > EOF using raw connection to peer i> write(52) -> 52: i> with-args\n i> foo 13\n i> value for foo\n i> bar 13\n i> value for bar\n o> readline() -> 2: o> 0\n o> readline() -> 2: o> 0\n o> readline() -> 2: o> 0\n o> readline() -> 2: o> 0\n o> readline() -> 2: o> 0\n i> write(6) -> 6: i> hello\n o> readline() -> 4: o> \d+\\n (re) o> readline\(\) -> \d+: (re) o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re) i> write(98) -> 98: i> between\n i> pairs 81\n i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000 o> readline() -> 2: o> 1\n o> readline() -> 1: o> \n Send an unknown command having an argument that looks numeric $ hg debugwireproto --localssh --peer raw << EOF > raw > unknown\n > foo 1\n > 0\n > readline > readline > readline > raw > hello\n > readline > readline > raw > between\n > pairs 81\n > 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000 > readline > readline > EOF using raw connection to peer i> write(16) -> 16: i> unknown\n i> foo 1\n i> 0\n o> readline() -> 2: o> 0\n o> readline() -> 2: o> 0\n o> readline() -> 2: o> 0\n i> write(6) -> 6: i> hello\n o> readline() -> 4: o> \d+\\n (re) o> readline\(\) -> \d+: (re) o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re) i> write(98) -> 98: i> between\n i> pairs 81\n i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000 o> readline() -> 2: o> 1\n o> readline() -> 1: o> \n $ hg debugwireproto --localssh --peer raw << EOF > raw > unknown\n > foo 1\n > 1\n > readline > readline > readline > raw > hello\n > readline > readline > raw > between\n > pairs 81\n > 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000 > readline > readline > EOF using raw connection to peer i> write(16) -> 16: i> unknown\n i> foo 1\n i> 1\n o> readline() -> 2: o> 0\n o> readline() -> 2: o> 0\n o> readline() -> 2: o> 0\n i> write(6) -> 6: i> hello\n o> readline() -> 4: o> \d+\\n (re) o> readline\(\) -> \d+: (re) o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re) i> write(98) -> 98: i> between\n i> pairs 81\n i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000 o> readline() -> 2: o> 1\n o> readline() -> 1: o> \n When sending a dict argument value, it is serialized to "<arg> <item count>" followed by "<key> <len>\n<value>" for each item in the dict. Dictionary value for unknown command $ hg debugwireproto --localssh --peer raw << EOF > raw > unknown\n > dict 3\n > key1 3\n > foo\n > key2 3\n > bar\n > key3 3\n > baz\n > readline > readline > readline > readline > readline > readline > readline > readline > raw > hello\n > readline > readline > EOF using raw connection to peer i> write(48) -> 48: i> unknown\n i> dict 3\n i> key1 3\n i> foo\n i> key2 3\n i> bar\n i> key3 3\n i> baz\n o> readline() -> 2: o> 0\n o> readline() -> 2: o> 0\n o> readline() -> 2: o> 0\n o> readline() -> 2: o> 0\n o> readline() -> 2: o> 0\n o> readline() -> 2: o> 0\n o> readline() -> 2: o> 0\n o> readline() -> 2: o> 0\n i> write(6) -> 6: i> hello\n o> readline() -> 4: o> \d+\\n (re) o> readline\(\) -> \d+: (re) o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re) Incomplete dictionary send $ hg debugwireproto --localssh --peer raw << EOF > raw > unknown\n > dict 3\n > key1 3\n > foo\n > readline > readline > readline > readline > EOF using raw connection to peer i> write(26) -> 26: i> unknown\n i> dict 3\n i> key1 3\n i> foo\n o> readline() -> 2: o> 0\n o> readline() -> 2: o> 0\n o> readline() -> 2: o> 0\n o> readline() -> 2: o> 0\n Incomplete value send $ hg debugwireproto --localssh --peer raw << EOF > raw > unknown\n > dict 3\n > key1 3\n > fo > readline > readline > readline > EOF using raw connection to peer i> write(24) -> 24: i> unknown\n i> dict 3\n i> key1 3\n i> fo o> readline() -> 2: o> 0\n o> readline() -> 2: o> 0\n o> readline() -> 2: o> 0\n Send a command line with spaces $ hg debugwireproto --localssh --peer raw << EOF > raw > unknown withspace\n > readline > raw > hello\n > readline > readline > raw > between\n > pairs 81\n > 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000 > readline > readline > EOF using raw connection to peer i> write(18) -> 18: i> unknown withspace\n o> readline() -> 2: o> 0\n i> write(6) -> 6: i> hello\n o> readline() -> 4: o> \d+\\n (re) o> readline\(\) -> \d+: (re) o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re) i> write(98) -> 98: i> between\n i> pairs 81\n i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000 o> readline() -> 2: o> 1\n o> readline() -> 1: o> \n $ hg debugwireproto --localssh --peer raw << EOF > raw > unknown with multiple spaces\n > readline > raw > hello\n > readline > readline > raw > between\n > pairs 81\n > 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000 > readline > EOF using raw connection to peer i> write(29) -> 29: i> unknown with multiple spaces\n o> readline() -> 2: o> 0\n i> write(6) -> 6: i> hello\n o> readline() -> 4: o> \d+\\n (re) o> readline\(\) -> \d+: (re) o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re) i> write(98) -> 98: i> between\n i> pairs 81\n i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000 o> readline() -> 2: o> 1\n $ hg debugwireproto --localssh --peer raw << EOF > raw > unknown with spaces\n > key 10\n > some value\n > readline > readline > readline > raw > hello\n > readline > readline > raw > between\n > pairs 81\n > 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000 > readline > readline > EOF using raw connection to peer i> write(38) -> 38: i> unknown with spaces\n i> key 10\n i> some value\n o> readline() -> 2: o> 0\n o> readline() -> 2: o> 0\n o> readline() -> 2: o> 0\n i> write(6) -> 6: i> hello\n o> readline() -> 4: o> \d+\\n (re) o> readline\(\) -> \d+: (re) o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re) i> write(98) -> 98: i> between\n i> pairs 81\n i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000 o> readline() -> 2: o> 1\n o> readline() -> 1: o> \n Send an unknown command after the "between" $ hg debugwireproto --localssh --peer raw << EOF > raw > hello\n > readline > readline > raw > between\n > pairs 81\n > 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000unknown > readline > readline > EOF using raw connection to peer i> write(6) -> 6: i> hello\n o> readline() -> 4: o> \d+\\n (re) o> readline\(\) -> \d+: (re) o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re) i> write(105) -> 105: i> between\n i> pairs 81\n i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000unknown o> readline() -> 2: o> 1\n o> readline() -> 1: o> \n And one with arguments $ hg debugwireproto --localssh --peer raw << EOF > raw > hello\n > between\n > pairs 81\n > 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000 > readline > readline > readline > readline > raw > unknown\n > foo 5\n > \nvalue\n > bar 3\n > baz\n > readline > readline > readline > EOF using raw connection to peer i> write(104) -> 104: i> hello\n i> between\n i> pairs 81\n i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000 o> readline() -> 4: o> \d+\\n (re) o> readline\(\) -> \d+: (re) o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re) o> readline() -> 2: o> 1\n o> readline() -> 1: o> \n i> write(31) -> 31: i> unknown\n i> foo 5\n i> \n i> value\n i> bar 3\n i> baz\n o> readline() -> 2: o> 0\n o> readline() -> 2: o> 0\n o> readline() -> 0: Send a valid command before the handshake $ hg debugwireproto --localssh --peer raw << EOF > raw > heads\n > readline > raw > hello\n > between\n > pairs 81\n > 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000 > readline > readline > readline > readline > EOF using raw connection to peer i> write(6) -> 6: i> heads\n o> readline() -> 3: o> 41\n i> write(104) -> 104: i> hello\n i> between\n i> pairs 81\n i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000 o> readline() -> 41: o> 68986213bd4485ea51533535e3fc9e78007a711f\n o> readline() -> 4: o> \d+\\n (re) o> readline\(\) -> \d+: (re) o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re) o> readline() -> 2: o> 1\n And a variation that doesn't send the between command $ hg debugwireproto --localssh --peer raw << EOF > raw > heads\n > readline > raw > hello\n > readline > readline > EOF using raw connection to peer i> write(6) -> 6: i> heads\n o> readline() -> 3: o> 41\n i> write(6) -> 6: i> hello\n o> readline() -> 41: o> 68986213bd4485ea51533535e3fc9e78007a711f\n o> readline() -> 4: o> \d+\\n (re) $ cd .. Test listkeys for listing namespaces $ hg init empty $ cd empty $ debugwireproto << EOF > command listkeys > namespace namespaces > EOF testing ssh1 creating ssh peer from handshake results i> write(104) -> 104: i> hello\n i> between\n i> pairs 81\n i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000 i> flush() -> None o> readline() -> 4: o> \d+\\n (re) o> readline\(\) -> \d+: (re) o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re) o> readline() -> 2: o> 1\n o> readline() -> 1: o> \n sending listkeys command i> write(9) -> 9: i> listkeys\n i> write(13) -> 13: i> namespace 10\n i> write(10) -> 10: namespaces i> flush() -> None o> bufferedreadline() -> 3: o> 30\n o> bufferedread(30) -> 30: o> bookmarks\t\n o> namespaces\t\n o> phases\t response: { b'bookmarks': b'', b'namespaces': b'', b'phases': b'' } $ cd .. Test listkeys for bookmarks $ hg init bookmarkrepo $ cd bookmarkrepo $ echo 0 > foo $ hg add foo $ hg -q commit -m initial $ echo 1 > foo $ hg commit -m second With no bookmarks set $ debugwireproto << EOF > command listkeys > namespace bookmarks > EOF testing ssh1 creating ssh peer from handshake results i> write(104) -> 104: i> hello\n i> between\n i> pairs 81\n i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000 i> flush() -> None o> readline() -> 4: o> \d+\\n (re) o> readline\(\) -> \d+: (re) o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re) o> readline() -> 2: o> 1\n o> readline() -> 1: o> \n sending listkeys command i> write(9) -> 9: i> listkeys\n i> write(12) -> 12: i> namespace 9\n i> write(9) -> 9: bookmarks i> flush() -> None o> bufferedreadline() -> 2: o> 0\n response: {} With a single bookmark set $ hg book -r 0 bookA $ debugwireproto << EOF > command listkeys > namespace bookmarks > EOF testing ssh1 creating ssh peer from handshake results i> write(104) -> 104: i> hello\n i> between\n i> pairs 81\n i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000 i> flush() -> None o> readline() -> 4: o> \d+\\n (re) o> readline\(\) -> \d+: (re) o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re) o> readline() -> 2: o> 1\n o> readline() -> 1: o> \n sending listkeys command i> write(9) -> 9: i> listkeys\n i> write(12) -> 12: i> namespace 9\n i> write(9) -> 9: bookmarks i> flush() -> None o> bufferedreadline() -> 3: o> 46\n o> bufferedread(46) -> 46: bookA\t68986213bd4485ea51533535e3fc9e78007a711f response: { b'bookA': b'68986213bd4485ea51533535e3fc9e78007a711f' } With multiple bookmarks set $ hg book -r 1 bookB $ debugwireproto << EOF > command listkeys > namespace bookmarks > EOF testing ssh1 creating ssh peer from handshake results i> write(104) -> 104: i> hello\n i> between\n i> pairs 81\n i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000 i> flush() -> None o> readline() -> 4: o> \d+\\n (re) o> readline\(\) -> \d+: (re) o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re) o> readline() -> 2: o> 1\n o> readline() -> 1: o> \n sending listkeys command i> write(9) -> 9: i> listkeys\n i> write(12) -> 12: i> namespace 9\n i> write(9) -> 9: bookmarks i> flush() -> None o> bufferedreadline() -> 3: o> 93\n o> bufferedread(93) -> 93: o> bookA\t68986213bd4485ea51533535e3fc9e78007a711f\n o> bookB\t1880f3755e2e52e3199e0ee5638128b08642f34d response: { b'bookA': b'68986213bd4485ea51533535e3fc9e78007a711f', b'bookB': b'1880f3755e2e52e3199e0ee5638128b08642f34d' } Test pushkey for bookmarks $ debugwireproto << EOF > command pushkey > namespace bookmarks > key remote > old > new 68986213bd4485ea51533535e3fc9e78007a711f > EOF testing ssh1 creating ssh peer from handshake results i> write(104) -> 104: i> hello\n i> between\n i> pairs 81\n i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000 i> flush() -> None o> readline() -> 4: o> \d+\\n (re) o> readline\(\) -> \d+: (re) o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re) o> readline() -> 2: o> 1\n o> readline() -> 1: o> \n sending pushkey command i> write(8) -> 8: i> pushkey\n i> write(6) -> 6: i> key 6\n i> write(6) -> 6: remote i> write(12) -> 12: i> namespace 9\n i> write(9) -> 9: bookmarks i> write(7) -> 7: i> new 40\n i> write(40) -> 40: 68986213bd4485ea51533535e3fc9e78007a711f i> write(6) -> 6: i> old 0\n i> flush() -> None o> bufferedreadline() -> 2: o> 2\n o> bufferedread(2) -> 2: o> 1\n response: True $ hg bookmarks bookA 0:68986213bd44 bookB 1:1880f3755e2e remote 0:68986213bd44 $ cd .. Test listkeys for phases $ hg init phasesrepo $ cd phasesrepo Phases on empty repo $ debugwireproto << EOF > command listkeys > namespace phases > EOF testing ssh1 creating ssh peer from handshake results i> write(104) -> 104: i> hello\n i> between\n i> pairs 81\n i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000 i> flush() -> None o> readline() -> 4: o> \d+\\n (re) o> readline\(\) -> \d+: (re) o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re) o> readline() -> 2: o> 1\n o> readline() -> 1: o> \n sending listkeys command i> write(9) -> 9: i> listkeys\n i> write(12) -> 12: i> namespace 6\n i> write(6) -> 6: phases i> flush() -> None o> bufferedreadline() -> 3: o> 15\n o> bufferedread(15) -> 15: publishing\tTrue response: { b'publishing': b'True' } Create some commits $ echo 0 > foo $ hg add foo $ hg -q commit -m initial $ hg phase --public $ echo 1 > foo $ hg commit -m 'head 1 commit 1' $ echo 2 > foo $ hg commit -m 'head 1 commit 2' $ hg -q up 0 $ echo 1a > foo $ hg commit -m 'head 2 commit 1' created new head $ echo 2a > foo $ hg commit -m 'head 2 commit 2' Two draft heads $ debugwireproto << EOF > command listkeys > namespace phases > EOF testing ssh1 creating ssh peer from handshake results i> write(104) -> 104: i> hello\n i> between\n i> pairs 81\n i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000 i> flush() -> None o> readline() -> 4: o> \d+\\n (re) o> readline\(\) -> \d+: (re) o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re) o> readline() -> 2: o> 1\n o> readline() -> 1: o> \n sending listkeys command i> write(9) -> 9: i> listkeys\n i> write(12) -> 12: i> namespace 6\n i> write(6) -> 6: phases i> flush() -> None o> bufferedreadline() -> 4: o> 101\n o> bufferedread(101) -> 101: o> 20b8a89289d80036e6c4e87c2083e3bea1586637\t1\n o> c4750011d906c18ea2f0527419cbc1a544435150\t1\n o> publishing\tTrue response: { b'20b8a89289d80036e6c4e87c2083e3bea1586637': b'1', b'c4750011d906c18ea2f0527419cbc1a544435150': b'1', b'publishing': b'True' } Single draft head $ hg phase --public -r 2 $ debugwireproto << EOF > command listkeys > namespace phases > EOF testing ssh1 creating ssh peer from handshake results i> write(104) -> 104: i> hello\n i> between\n i> pairs 81\n i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000 i> flush() -> None o> readline() -> 4: o> \d+\\n (re) o> readline\(\) -> \d+: (re) o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re) o> readline() -> 2: o> 1\n o> readline() -> 1: o> \n sending listkeys command i> write(9) -> 9: i> listkeys\n i> write(12) -> 12: i> namespace 6\n i> write(6) -> 6: phases i> flush() -> None o> bufferedreadline() -> 3: o> 58\n o> bufferedread(58) -> 58: o> c4750011d906c18ea2f0527419cbc1a544435150\t1\n o> publishing\tTrue response: { b'c4750011d906c18ea2f0527419cbc1a544435150': b'1', b'publishing': b'True' } All public heads $ hg phase --public -r 4 $ debugwireproto << EOF > command listkeys > namespace phases > EOF testing ssh1 creating ssh peer from handshake results i> write(104) -> 104: i> hello\n i> between\n i> pairs 81\n i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000 i> flush() -> None o> readline() -> 4: o> \d+\\n (re) o> readline\(\) -> \d+: (re) o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re) o> readline() -> 2: o> 1\n o> readline() -> 1: o> \n sending listkeys command i> write(9) -> 9: i> listkeys\n i> write(12) -> 12: i> namespace 6\n i> write(6) -> 6: phases i> flush() -> None o> bufferedreadline() -> 3: o> 15\n o> bufferedread(15) -> 15: publishing\tTrue response: { b'publishing': b'True' } Setting public phase via pushkey $ hg phase --draft --force -r . $ debugwireproto << EOF > command pushkey > namespace phases > key 7127240a084fd9dc86fe8d1f98e26229161ec82b > old 1 > new 0 > EOF testing ssh1 creating ssh peer from handshake results i> write(104) -> 104: i> hello\n i> between\n i> pairs 81\n i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000 i> flush() -> None o> readline() -> 4: o> \d+\\n (re) o> readline\(\) -> \d+: (re) o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re) o> readline() -> 2: o> 1\n o> readline() -> 1: o> \n sending pushkey command i> write(8) -> 8: i> pushkey\n i> write(7) -> 7: i> key 40\n i> write(40) -> 40: 7127240a084fd9dc86fe8d1f98e26229161ec82b i> write(12) -> 12: i> namespace 6\n i> write(6) -> 6: phases i> write(6) -> 6: i> new 1\n i> write(1) -> 1: 0 i> write(6) -> 6: i> old 1\n i> write(1) -> 1: 1 i> flush() -> None o> bufferedreadline() -> 2: o> 2\n o> bufferedread(2) -> 2: o> 1\n response: True $ hg phase . 4: public $ cd .. Test batching of requests $ hg init batching $ cd batching $ echo 0 > foo $ hg add foo $ hg -q commit -m initial $ hg phase --public $ echo 1 > foo $ hg commit -m 'commit 1' $ hg -q up 0 $ echo 2 > foo $ hg commit -m 'commit 2' created new head $ hg book -r 1 bookA $ hg book -r 2 bookB $ debugwireproto << EOF > batchbegin > command heads > command listkeys > namespace bookmarks > command listkeys > namespace phases > batchsubmit > EOF testing ssh1 creating ssh peer from handshake results i> write(104) -> 104: i> hello\n i> between\n i> pairs 81\n i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000 i> flush() -> None o> readline() -> 4: o> \d+\\n (re) o> readline\(\) -> \d+: (re) o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re) o> readline() -> 2: o> 1\n o> readline() -> 1: o> \n sending batch with 3 sub-commands i> write(6) -> 6: i> batch\n i> write(4) -> 4: i> * 0\n i> write(8) -> 8: i> cmds 61\n i> write(61) -> 61: heads ;listkeys namespace=bookmarks;listkeys namespace=phases i> flush() -> None o> bufferedreadline() -> 4: o> 278\n o> bufferedread(278) -> 278: o> bfebe6bd38eebc6f8202e419c1171268987ea6a6 4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\n o> ;bookA\t4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\n o> bookB\tbfebe6bd38eebc6f8202e419c1171268987ea6a6;4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\t1\n o> bfebe6bd38eebc6f8202e419c1171268987ea6a6\t1\n o> publishing\tTrue response #0: bfebe6bd38eebc6f8202e419c1171268987ea6a6 4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\n response #1: bookA\t4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\nbookB\tbfebe6bd38eebc6f8202e419c1171268987ea6a6 response #2: 4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\t1\nbfebe6bd38eebc6f8202e419c1171268987ea6a6\t1\npublishing\tTrue