Mercurial > hg-stable
view tests/test-run-tests.t @ 44650:5f9c917e3b50
phabricator: teach `getoldnodedrevmap()` to handle folded reviews
The tricky part here is reasoning through all of the possible predecessor
scenarios. In the typical case of submitting a folded range and then
resubmitting it (also folded), filtering the list of commits for the diff stored
on Phabricator through the local predecessor list for each single node will
result in the typical 1:1 mapping to the old node.
There are edge cases like using `hg fold` within the range prior to
resubmitting, that will result in mapping to multiple old nodes. In that case,
the first direct predecessor is needed for the base of the diff, and the last
direct predecessor is needed for the head of the diff in order to make sure that
the entire range is included in the diff content. And none of this matters for
commits in the middle of the range, as they are never used.
Fortunately the only crucial thing here is the `drev` number for each node. For
these complicated cases where there are multiple old nodes, simply ignore them
all. This will cause `createdifferentialrevision()` to generate a new diff
(within the same Differential), and avoids complicating the code.
Differential Revision: https://phab.mercurial-scm.org/D8311
| author | Matt Harbison <matt_harbison@yahoo.com> |
|---|---|
| date | Mon, 16 Mar 2020 13:36:12 -0400 |
| parents | 1d60a7825dcb |
| children | 617cd3b1e9cd |
line wrap: on
line source
This file tests the behavior of run-tests.py itself. Avoid interference from actual test env: $ . "$TESTDIR/helper-runtests.sh" Smoke test with install ============ $ "$PYTHON" $TESTDIR/run-tests.py $HGTEST_RUN_TESTS_PURE -l running 0 tests using 0 parallel processes # Ran 0 tests, 0 skipped, 0 failed. Define a helper to avoid the install step ============= $ rt() > { > "$PYTHON" $TESTDIR/run-tests.py --with-hg=`which hg` -j1 "$@" > } error paths #if symlink $ ln -s `which true` hg $ "$PYTHON" $TESTDIR/run-tests.py --with-hg=./hg warning: --with-hg should specify an hg script running 0 tests using 0 parallel processes # Ran 0 tests, 0 skipped, 0 failed. $ rm hg #endif #if execbit $ touch hg $ "$PYTHON" $TESTDIR/run-tests.py --with-hg=./hg usage: run-tests.py [options] [tests] run-tests.py: error: --with-hg must specify an executable hg script [2] $ rm hg #endif Features for testing optional lines =================================== $ cat > hghaveaddon.py <<EOF > import hghave > @hghave.check("custom", "custom hghave feature") > def has_custom(): > return True > @hghave.check("missing", "missing hghave feature") > def has_missing(): > return False > EOF an empty test ======================= $ touch test-empty.t $ rt running 1 tests using 1 parallel processes . # Ran 1 tests, 0 skipped, 0 failed. $ rm test-empty.t a succesful test ======================= $ cat > test-success.t << EOF > $ echo babar > babar > $ echo xyzzy > dont_print (?) > nothing[42]line (re) (?) > never*happens (glob) (?) > more_nothing (?) > xyzzy > nor this (?) > $ printf 'abc\ndef\nxyz\n' > 123 (?) > abc > def (?) > 456 (?) > xyz > $ printf 'zyx\nwvu\ntsr\n' > abc (?) > zyx (custom !) > wvu > no_print (no-custom !) > tsr (no-missing !) > missing (missing !) > EOF $ rt running 1 tests using 1 parallel processes . # Ran 1 tests, 0 skipped, 0 failed. failing test ================== test churn with globs $ cat > test-failure.t <<EOF > $ echo "bar-baz"; echo "bar-bad"; echo foo > bar*bad (glob) > bar*baz (glob) > | fo (re) > EOF $ rt test-failure.t running 1 tests using 1 parallel processes --- $TESTTMP/test-failure.t +++ $TESTTMP/test-failure.t.err @@ -1,4 +1,4 @@ $ echo "bar-baz"; echo "bar-bad"; echo foo + bar*baz (glob) bar*bad (glob) - bar*baz (glob) - | fo (re) + foo ERROR: test-failure.t output changed ! Failed test-failure.t: output changed # Ran 1 tests, 0 skipped, 1 failed. python hash seed: * (glob) [1] test how multiple globs gets matched with lines in output $ cat > test-failure-globs.t <<EOF > $ echo "context"; echo "context"; \ > echo "key: 1"; echo "value: not a"; \ > echo "key: 2"; echo "value: not b"; \ > echo "key: 3"; echo "value: c"; \ > echo "key: 4"; echo "value: d" > context > context > key: 1 > value: a > key: 2 > value: b > key: 3 > value: * (glob) > key: 4 > value: * (glob) > EOF $ rt test-failure-globs.t running 1 tests using 1 parallel processes --- $TESTTMP/test-failure-globs.t +++ $TESTTMP/test-failure-globs.t.err @@ -2,9 +2,9 @@ context context key: 1 - value: a + value: not a key: 2 - value: b + value: not b key: 3 value: * (glob) key: 4 ERROR: test-failure-globs.t output changed ! Failed test-failure-globs.t: output changed # Ran 1 tests, 0 skipped, 1 failed. python hash seed: * (glob) [1] $ rm test-failure-globs.t test diff colorisation #if no-windows pygments $ rt test-failure.t --color always running 1 tests using 1 parallel processes \x1b[38;5;124m--- $TESTTMP/test-failure.t\x1b[39m (esc) \x1b[38;5;34m+++ $TESTTMP/test-failure.t.err\x1b[39m (esc) \x1b[38;5;90;01m@@ -1,4 +1,4 @@\x1b[39;00m (esc) $ echo "bar-baz"; echo "bar-bad"; echo foo \x1b[38;5;34m+ bar*baz (glob)\x1b[39m (esc) bar*bad (glob) \x1b[38;5;124m- bar*baz (glob)\x1b[39m (esc) \x1b[38;5;124m- | fo (re)\x1b[39m (esc) \x1b[38;5;34m+ foo\x1b[39m (esc) \x1b[38;5;88mERROR: \x1b[39m\x1b[38;5;9mtest-failure.t\x1b[39m\x1b[38;5;88m output changed\x1b[39m (esc) ! \x1b[38;5;88mFailed \x1b[39m\x1b[38;5;9mtest-failure.t\x1b[39m\x1b[38;5;88m: output changed\x1b[39m (esc) # Ran 1 tests, 0 skipped, 1 failed. python hash seed: * (glob) [1] $ rt test-failure.t 2> tmp.log running 1 tests using 1 parallel processes [1] $ cat tmp.log --- $TESTTMP/test-failure.t +++ $TESTTMP/test-failure.t.err @@ -1,4 +1,4 @@ $ echo "bar-baz"; echo "bar-bad"; echo foo + bar*baz (glob) bar*bad (glob) - bar*baz (glob) - | fo (re) + foo ERROR: test-failure.t output changed ! Failed test-failure.t: output changed # Ran 1 tests, 0 skipped, 1 failed. python hash seed: * (glob) #endif $ cat > test-failure.t << EOF > $ true > should go away (true !) > $ true > should stay (false !) > > Should remove first line, not second or third > $ echo 'testing' > baz*foo (glob) (true !) > foobar*foo (glob) (false !) > te*ting (glob) (true !) > > Should keep first two lines, remove third and last > $ echo 'testing' > test.ng (re) (true !) > foo.ar (re) (false !) > b.r (re) (true !) > missing (?) > awol (true !) > > The "missing" line should stay, even though awol is dropped > $ echo 'testing' > test.ng (re) (true !) > foo.ar (?) > awol > missing (?) > EOF $ rt test-failure.t running 1 tests using 1 parallel processes --- $TESTTMP/test-failure.t +++ $TESTTMP/test-failure.t.err @@ -1,11 +1,9 @@ $ true - should go away (true !) $ true should stay (false !) Should remove first line, not second or third $ echo 'testing' - baz*foo (glob) (true !) foobar*foo (glob) (false !) te*ting (glob) (true !) foo.ar (re) (false !) missing (?) @@ -13,13 +11,10 @@ $ echo 'testing' test.ng (re) (true !) foo.ar (re) (false !) - b.r (re) (true !) missing (?) - awol (true !) The "missing" line should stay, even though awol is dropped $ echo 'testing' test.ng (re) (true !) foo.ar (?) - awol missing (?) ERROR: test-failure.t output changed ! Failed test-failure.t: output changed # Ran 1 tests, 0 skipped, 1 failed. python hash seed: * (glob) [1] basic failing test $ cat > test-failure.t << EOF > $ echo babar > rataxes > This is a noop statement so that > this test is still more bytes than success. > pad pad pad pad............................................................ > pad pad pad pad............................................................ > pad pad pad pad............................................................ > pad pad pad pad............................................................ > pad pad pad pad............................................................ > pad pad pad pad............................................................ > EOF >>> fh = open('test-failure-unicode.t', 'wb') >>> fh.write(u' $ echo babar\u03b1\n'.encode('utf-8')) and None >>> fh.write(u' l\u03b5\u03b5t\n'.encode('utf-8')) and None $ rt running 3 tests using 1 parallel processes --- $TESTTMP/test-failure.t +++ $TESTTMP/test-failure.t.err @@ -1,5 +1,5 @@ $ echo babar - rataxes + babar This is a noop statement so that this test is still more bytes than success. pad pad pad pad............................................................ ERROR: test-failure.t output changed !. --- $TESTTMP/test-failure-unicode.t +++ $TESTTMP/test-failure-unicode.t.err @@ -1,2 +1,2 @@ $ echo babar\xce\xb1 (esc) - l\xce\xb5\xce\xb5t (esc) + babar\xce\xb1 (esc) ERROR: test-failure-unicode.t output changed ! Failed test-failure-unicode.t: output changed Failed test-failure.t: output changed # Ran 3 tests, 0 skipped, 2 failed. python hash seed: * (glob) [1] test --outputdir $ mkdir output $ rt --outputdir output running 3 tests using 1 parallel processes --- $TESTTMP/test-failure.t +++ $TESTTMP/output/test-failure.t.err @@ -1,5 +1,5 @@ $ echo babar - rataxes + babar This is a noop statement so that this test is still more bytes than success. pad pad pad pad............................................................ ERROR: test-failure.t output changed !. --- $TESTTMP/test-failure-unicode.t +++ $TESTTMP/output/test-failure-unicode.t.err @@ -1,2 +1,2 @@ $ echo babar\xce\xb1 (esc) - l\xce\xb5\xce\xb5t (esc) + babar\xce\xb1 (esc) ERROR: test-failure-unicode.t output changed ! Failed test-failure-unicode.t: output changed Failed test-failure.t: output changed # Ran 3 tests, 0 skipped, 2 failed. python hash seed: * (glob) [1] $ ls -a output . .. .testtimes test-failure-unicode.t.err test-failure.t.err test --xunit support $ rt --xunit=xunit.xml running 3 tests using 1 parallel processes --- $TESTTMP/test-failure.t +++ $TESTTMP/test-failure.t.err @@ -1,5 +1,5 @@ $ echo babar - rataxes + babar This is a noop statement so that this test is still more bytes than success. pad pad pad pad............................................................ ERROR: test-failure.t output changed !. --- $TESTTMP/test-failure-unicode.t +++ $TESTTMP/test-failure-unicode.t.err @@ -1,2 +1,2 @@ $ echo babar\xce\xb1 (esc) - l\xce\xb5\xce\xb5t (esc) + babar\xce\xb1 (esc) ERROR: test-failure-unicode.t output changed ! Failed test-failure-unicode.t: output changed Failed test-failure.t: output changed # Ran 3 tests, 0 skipped, 2 failed. python hash seed: * (glob) [1] $ cat xunit.xml <?xml version="1.0" encoding="utf-8"?> <testsuite errors="0" failures="2" name="run-tests" skipped="0" tests="3"> <testcase name="test-success.t" time="*"/> (glob) <testcase name="test-failure-unicode.t" time="*"> (glob) <failure message="output changed" type="output-mismatch"><![CDATA[--- $TESTTMP/test-failure-unicode.t (py38 !) <failure message="output changed" type="output-mismatch"> (no-py38 !) <![CDATA[--- $TESTTMP/test-failure-unicode.t (no-py38 !) +++ $TESTTMP/test-failure-unicode.t.err @@ -1,2 +1,2 @@ $ echo babar\xce\xb1 (esc) - l\xce\xb5\xce\xb5t (esc) + babar\xce\xb1 (esc) ]]></failure> (py38 !) ]]> </failure> (no-py38 !) </testcase> <testcase name="test-failure.t" time="*"> (glob) <failure message="output changed" type="output-mismatch"><![CDATA[--- $TESTTMP/test-failure.t (py38 !) <failure message="output changed" type="output-mismatch"> (no-py38 !) <![CDATA[--- $TESTTMP/test-failure.t (no-py38 !) +++ $TESTTMP/test-failure.t.err @@ -1,5 +1,5 @@ $ echo babar - rataxes + babar This is a noop statement so that this test is still more bytes than success. pad pad pad pad............................................................ ]]></failure> (py38 !) ]]> </failure> (no-py38 !) </testcase> </testsuite> $ cat .testtimes test-empty.t * (glob) test-failure-globs.t * (glob) test-failure-unicode.t * (glob) test-failure.t * (glob) test-success.t * (glob) $ rt --list-tests test-failure-unicode.t test-failure.t test-success.t $ rt --list-tests --json test-failure-unicode.t test-failure.t test-success.t $ cat report.json testreport ={ "test-failure-unicode.t": { "result": "success" }, "test-failure.t": { "result": "success" }, "test-success.t": { "result": "success" } } (no-eol) $ rt --list-tests --xunit=xunit.xml test-failure-unicode.t test-failure.t test-success.t $ cat xunit.xml <?xml version="1.0" encoding="utf-8"?> <testsuite errors="0" failures="0" name="run-tests" skipped="0" tests="0"> <testcase name="test-failure-unicode.t"/> <testcase name="test-failure.t"/> <testcase name="test-success.t"/> </testsuite> $ rt --list-tests test-failure* --json --xunit=xunit.xml --outputdir output test-failure-unicode.t test-failure.t $ cat output/report.json testreport ={ "test-failure-unicode.t": { "result": "success" }, "test-failure.t": { "result": "success" } } (no-eol) $ cat xunit.xml <?xml version="1.0" encoding="utf-8"?> <testsuite errors="0" failures="0" name="run-tests" skipped="0" tests="0"> <testcase name="test-failure-unicode.t"/> <testcase name="test-failure.t"/> </testsuite> $ rm test-failure-unicode.t test for --retest ==================== $ rt --retest running 2 tests using 1 parallel processes --- $TESTTMP/test-failure.t +++ $TESTTMP/test-failure.t.err @@ -1,5 +1,5 @@ $ echo babar - rataxes + babar This is a noop statement so that this test is still more bytes than success. pad pad pad pad............................................................ ERROR: test-failure.t output changed ! Failed test-failure.t: output changed # Ran 2 tests, 1 skipped, 1 failed. python hash seed: * (glob) [1] --retest works with --outputdir $ rm -r output $ mkdir output $ mv test-failure.t.err output $ rt --retest --outputdir output running 2 tests using 1 parallel processes --- $TESTTMP/test-failure.t +++ $TESTTMP/output/test-failure.t.err @@ -1,5 +1,5 @@ $ echo babar - rataxes + babar This is a noop statement so that this test is still more bytes than success. pad pad pad pad............................................................ ERROR: test-failure.t output changed ! Failed test-failure.t: output changed # Ran 2 tests, 1 skipped, 1 failed. python hash seed: * (glob) [1] Selecting Tests To Run ====================== successful $ rt test-success.t running 1 tests using 1 parallel processes . # Ran 1 tests, 0 skipped, 0 failed. success w/ keyword $ rt -k xyzzy running 2 tests using 1 parallel processes . # Ran 2 tests, 1 skipped, 0 failed. failed $ rt test-failure.t running 1 tests using 1 parallel processes --- $TESTTMP/test-failure.t +++ $TESTTMP/test-failure.t.err @@ -1,5 +1,5 @@ $ echo babar - rataxes + babar This is a noop statement so that this test is still more bytes than success. pad pad pad pad............................................................ ERROR: test-failure.t output changed ! Failed test-failure.t: output changed # Ran 1 tests, 0 skipped, 1 failed. python hash seed: * (glob) [1] failure w/ keyword $ rt -k rataxes running 2 tests using 1 parallel processes --- $TESTTMP/test-failure.t +++ $TESTTMP/test-failure.t.err @@ -1,5 +1,5 @@ $ echo babar - rataxes + babar This is a noop statement so that this test is still more bytes than success. pad pad pad pad............................................................ ERROR: test-failure.t output changed ! Failed test-failure.t: output changed # Ran 2 tests, 1 skipped, 1 failed. python hash seed: * (glob) [1] Verify that when a process fails to start we show a useful message ================================================================== $ cat > test-serve-fail.t <<EOF > $ echo 'abort: child process failed to start blah' > EOF $ rt test-serve-fail.t running 1 tests using 1 parallel processes --- $TESTTMP/test-serve-fail.t +++ $TESTTMP/test-serve-fail.t.err @@ -1* +1,2 @@ (glob) $ echo 'abort: child process failed to start blah' + abort: child process failed to start blah ERROR: test-serve-fail.t output changed ! Failed test-serve-fail.t: server failed to start (HGPORT=*) (glob) # Ran 1 tests, 0 skipped, 1 failed. python hash seed: * (glob) [1] $ rm test-serve-fail.t Verify that we can try other ports =================================== Extensions aren't inherited by the invoked run-tests.py. An extension introducing a repository requirement could cause this to fail. So we force HGRCPATH to get a clean environment. $ HGRCPATH= hg init inuse $ hg serve -R inuse -p $HGPORT -d --pid-file=blocks.pid $ cat blocks.pid >> $DAEMON_PIDS $ cat > test-serve-inuse.t <<EOF > $ hg serve -R `pwd`/inuse -p \$HGPORT -d --pid-file=hg.pid > $ cat hg.pid >> \$DAEMON_PIDS > EOF $ rt test-serve-inuse.t running 1 tests using 1 parallel processes . # Ran 1 tests, 0 skipped, 0 failed. $ rm test-serve-inuse.t $ killdaemons.py $DAEMON_PIDS Running In Debug Mode ====================== $ rt --debug 2>&1 | grep -v pwd running 2 tests using 1 parallel processes + alias hg=hg.exe (windows !) + echo *SALT* 0 0 (glob) *SALT* 0 0 (glob) + echo babar babar + echo *SALT* 10 0 (glob) *SALT* 10 0 (glob) .+ alias hg=hg.exe (windows !) *+ echo *SALT* 0 0 (glob) *SALT* 0 0 (glob) + echo babar babar + echo *SALT* 2 0 (glob) *SALT* 2 0 (glob) + echo xyzzy xyzzy + echo *SALT* 9 0 (glob) *SALT* 9 0 (glob) + printf *abc\ndef\nxyz\n* (glob) abc def xyz + echo *SALT* 15 0 (glob) *SALT* 15 0 (glob) + printf *zyx\nwvu\ntsr\n* (glob) zyx wvu tsr + echo *SALT* 22 0 (glob) *SALT* 22 0 (glob) . # Ran 2 tests, 0 skipped, 0 failed. Parallel runs ============== (duplicate the failing test to get predictable output) $ cp test-failure.t test-failure-copy.t $ rt --jobs 2 test-failure*.t -n running 2 tests using 2 parallel processes !! Failed test-failure*.t: output changed (glob) Failed test-failure*.t: output changed (glob) # Ran 2 tests, 0 skipped, 2 failed. python hash seed: * (glob) [1] failures in parallel with --first should only print one failure $ rt --jobs 2 --first test-failure*.t running 2 tests using 2 parallel processes --- $TESTTMP/test-failure*.t (glob) +++ $TESTTMP/test-failure*.t.err (glob) @@ -1,5 +1,5 @@ $ echo babar - rataxes + babar This is a noop statement so that this test is still more bytes than success. pad pad pad pad............................................................ Failed test-failure*.t: output changed (glob) Failed test-failure*.t: output changed (glob) # Ran 2 tests, 0 skipped, 2 failed. python hash seed: * (glob) [1] (delete the duplicated test file) $ rm test-failure-copy.t multiple runs per test should be parallelized $ rt --jobs 2 --runs-per-test 2 test-success.t running 2 tests using 2 parallel processes .. # Ran 2 tests, 0 skipped, 0 failed. Interactive run =============== (backup the failing test) $ cp test-failure.t backup Refuse the fix $ echo 'n' | rt -i running 2 tests using 1 parallel processes --- $TESTTMP/test-failure.t +++ $TESTTMP/test-failure.t.err @@ -1,5 +1,5 @@ $ echo babar - rataxes + babar This is a noop statement so that this test is still more bytes than success. pad pad pad pad............................................................ Accept this change? [n] ERROR: test-failure.t output changed !. Failed test-failure.t: output changed # Ran 2 tests, 0 skipped, 1 failed. python hash seed: * (glob) [1] $ cat test-failure.t $ echo babar rataxes This is a noop statement so that this test is still more bytes than success. pad pad pad pad............................................................ pad pad pad pad............................................................ pad pad pad pad............................................................ pad pad pad pad............................................................ pad pad pad pad............................................................ pad pad pad pad............................................................ Interactive with custom view $ echo 'n' | rt -i --view echo running 2 tests using 1 parallel processes $TESTTMP/test-failure.t $TESTTMP/test-failure.t.err Accept this change? [n]* (glob) ERROR: test-failure.t output changed !. Failed test-failure.t: output changed # Ran 2 tests, 0 skipped, 1 failed. python hash seed: * (glob) [1] View the fix $ echo 'y' | rt --view echo running 2 tests using 1 parallel processes $TESTTMP/test-failure.t $TESTTMP/test-failure.t.err ERROR: test-failure.t output changed !. Failed test-failure.t: output changed # Ran 2 tests, 0 skipped, 1 failed. python hash seed: * (glob) [1] Accept the fix $ cat >> test-failure.t <<EOF > $ echo 'saved backup bundle to \$TESTTMP/foo.hg' > saved backup bundle to \$TESTTMP/foo.hg > $ echo 'saved backup bundle to \$TESTTMP/foo.hg' > saved backup bundle to $TESTTMP\\foo.hg > $ echo 'saved backup bundle to \$TESTTMP/foo.hg' > saved backup bundle to \$TESTTMP/*.hg (glob) > EOF $ echo 'y' | rt -i 2>&1 running 2 tests using 1 parallel processes --- $TESTTMP/test-failure.t +++ $TESTTMP/test-failure.t.err @@ -1,5 +1,5 @@ $ echo babar - rataxes + babar This is a noop statement so that this test is still more bytes than success. pad pad pad pad............................................................ @@ -11,6 +11,6 @@ $ echo 'saved backup bundle to $TESTTMP/foo.hg' saved backup bundle to $TESTTMP/foo.hg $ echo 'saved backup bundle to $TESTTMP/foo.hg' - saved backup bundle to $TESTTMP\foo.hg + saved backup bundle to $TESTTMP/foo.hg $ echo 'saved backup bundle to $TESTTMP/foo.hg' saved backup bundle to $TESTTMP/*.hg (glob) Accept this change? [n] .. # Ran 2 tests, 0 skipped, 0 failed. $ sed -e 's,(glob)$,&<,g' test-failure.t $ echo babar babar This is a noop statement so that this test is still more bytes than success. pad pad pad pad............................................................ pad pad pad pad............................................................ pad pad pad pad............................................................ pad pad pad pad............................................................ pad pad pad pad............................................................ pad pad pad pad............................................................ $ echo 'saved backup bundle to $TESTTMP/foo.hg' saved backup bundle to $TESTTMP/foo.hg $ echo 'saved backup bundle to $TESTTMP/foo.hg' saved backup bundle to $TESTTMP/foo.hg $ echo 'saved backup bundle to $TESTTMP/foo.hg' saved backup bundle to $TESTTMP/*.hg (glob)< Race condition - test file was modified when test is running $ TESTRACEDIR=`pwd` $ export TESTRACEDIR $ cat > test-race.t <<EOF > $ echo 1 > $ echo "# a new line" >> $TESTRACEDIR/test-race.t > EOF $ rt -i test-race.t running 1 tests using 1 parallel processes --- $TESTTMP/test-race.t +++ $TESTTMP/test-race.t.err @@ -1,2 +1,3 @@ $ echo 1 + 1 $ echo "# a new line" >> $TESTTMP/test-race.t Reference output has changed (run again to prompt changes) ERROR: test-race.t output changed ! Failed test-race.t: output changed # Ran 1 tests, 0 skipped, 1 failed. python hash seed: * (glob) [1] $ rm test-race.t When "#testcases" is used in .t files $ cat >> test-cases.t <<EOF > #testcases a b > #if a > $ echo 1 > #endif > #if b > $ echo 2 > #endif > EOF $ cat <<EOF | rt -i test-cases.t 2>&1 > y > y > EOF running 2 tests using 1 parallel processes --- $TESTTMP/test-cases.t +++ $TESTTMP/test-cases.t#a.err @@ -1,6 +1,7 @@ #testcases a b #if a $ echo 1 + 1 #endif #if b $ echo 2 Accept this change? [n] . --- $TESTTMP/test-cases.t +++ $TESTTMP/test-cases.t#b.err @@ -5,4 +5,5 @@ #endif #if b $ echo 2 + 2 #endif Accept this change? [n] . # Ran 2 tests, 0 skipped, 0 failed. $ cat test-cases.t #testcases a b #if a $ echo 1 1 #endif #if b $ echo 2 2 #endif $ cat >> test-cases.t <<'EOF' > #if a > $ NAME=A > #else > $ NAME=B > #endif > $ echo $NAME > A (a !) > B (b !) > EOF $ rt test-cases.t running 2 tests using 1 parallel processes .. # Ran 2 tests, 0 skipped, 0 failed. When using multiple dimensions of "#testcases" in .t files $ cat > test-cases.t <<'EOF' > #testcases a b > #testcases c d > #if a d > $ echo $TESTCASE > a#d > #endif > #if b c > $ echo yes > no > #endif > EOF $ rt test-cases.t running 4 tests using 1 parallel processes .. --- $TESTTMP/test-cases.t +++ $TESTTMP/test-cases.t#b#c.err @@ -6,5 +6,5 @@ #endif #if b c $ echo yes - no + yes #endif ERROR: test-cases.t#b#c output changed !. Failed test-cases.t#b#c: output changed # Ran 4 tests, 0 skipped, 1 failed. python hash seed: * (glob) [1] $ rm test-cases.t#b#c.err $ rm test-cases.t (reinstall) $ mv backup test-failure.t No Diff =============== $ rt --nodiff running 2 tests using 1 parallel processes !. Failed test-failure.t: output changed # Ran 2 tests, 0 skipped, 1 failed. python hash seed: * (glob) [1] test --tmpdir support $ rt --tmpdir=$TESTTMP/keep test-success.t running 1 tests using 1 parallel processes Keeping testtmp dir: $TESTTMP/keep/child1/test-success.t Keeping threadtmp dir: $TESTTMP/keep/child1 . # Ran 1 tests, 0 skipped, 0 failed. timeouts ======== $ cat > test-timeout.t <<EOF > $ sleep 2 > $ echo pass > pass > EOF > echo '#require slow' > test-slow-timeout.t > cat test-timeout.t >> test-slow-timeout.t $ rt --timeout=1 --slowtimeout=3 test-timeout.t test-slow-timeout.t running 2 tests using 1 parallel processes st Skipped test-slow-timeout.t: missing feature: allow slow tests (use --allow-slow-tests) Failed test-timeout.t: timed out # Ran 1 tests, 1 skipped, 1 failed. python hash seed: * (glob) [1] $ rt --timeout=1 --slowtimeout=3 \ > test-timeout.t test-slow-timeout.t --allow-slow-tests running 2 tests using 1 parallel processes .t Failed test-timeout.t: timed out # Ran 2 tests, 0 skipped, 1 failed. python hash seed: * (glob) [1] $ rm test-timeout.t test-slow-timeout.t test for --time ================== $ rt test-success.t --time running 1 tests using 1 parallel processes . # Ran 1 tests, 0 skipped, 0 failed. # Producing time report start end cuser csys real Test \s*[\d\.]{5,8} \s*[\d\.]{5,8} \s*[\d\.]{5,8} \s*[\d\.]{5,8} \s*[\d\.]{5,8} test-success.t (re) test for --time with --job enabled ==================================== $ rt test-success.t --time --jobs 2 running 1 tests using 1 parallel processes . # Ran 1 tests, 0 skipped, 0 failed. # Producing time report start end cuser csys real Test \s*[\d\.]{5,8} \s*[\d\.]{5,8} \s*[\d\.]{5,8} \s*[\d\.]{5,8} \s*[\d\.]{5,8} test-success.t (re) Skips ================ $ cat > test-skip.t <<EOF > $ echo xyzzy > #if true > #require false > #end > EOF $ cat > test-noskip.t <<EOF > #if false > #require false > #endif > EOF $ rt --nodiff running 4 tests using 1 parallel processes !.s. Skipped test-skip.t: missing feature: nail clipper Failed test-failure.t: output changed # Ran 3 tests, 1 skipped, 1 failed. python hash seed: * (glob) [1] $ rm test-noskip.t $ rt --keyword xyzzy running 3 tests using 1 parallel processes .s Skipped test-skip.t: missing feature: nail clipper # Ran 2 tests, 2 skipped, 0 failed. Skips with xml $ rt --keyword xyzzy \ > --xunit=xunit.xml running 3 tests using 1 parallel processes .s Skipped test-skip.t: missing feature: nail clipper # Ran 2 tests, 2 skipped, 0 failed. $ cat xunit.xml <?xml version="1.0" encoding="utf-8"?> <testsuite errors="0" failures="0" name="run-tests" skipped="2" tests="2"> <testcase name="test-success.t" time="*"/> (glob) <testcase name="test-skip.t"> <skipped><![CDATA[missing feature: nail clipper]]></skipped> (py38 !) <skipped> (no-py38 !) <![CDATA[missing feature: nail clipper]]> </skipped> (no-py38 !) </testcase> </testsuite> Missing skips or blacklisted skips don't count as executed: $ echo test-failure.t > blacklist $ rt --blacklist=blacklist --json\ > test-failure.t test-bogus.t running 2 tests using 1 parallel processes ss Skipped test-bogus.t: Doesn't exist Skipped test-failure.t: blacklisted # Ran 0 tests, 2 skipped, 0 failed. $ cat report.json testreport ={ "test-bogus.t": { "result": "skip" }, "test-failure.t": { "result": "skip" } } (no-eol) Whitelist trumps blacklist $ echo test-failure.t > whitelist $ rt --blacklist=blacklist --whitelist=whitelist --json\ > test-failure.t test-bogus.t running 2 tests using 1 parallel processes s --- $TESTTMP/test-failure.t +++ $TESTTMP/test-failure.t.err @@ -1,5 +1,5 @@ $ echo babar - rataxes + babar This is a noop statement so that this test is still more bytes than success. pad pad pad pad............................................................ ERROR: test-failure.t output changed ! Skipped test-bogus.t: Doesn't exist Failed test-failure.t: output changed # Ran 1 tests, 1 skipped, 1 failed. python hash seed: * (glob) [1] Ensure that --test-list causes only the tests listed in that file to be executed. $ echo test-success.t >> onlytest $ rt --test-list=onlytest running 1 tests using 1 parallel processes . # Ran 1 tests, 0 skipped, 0 failed. $ echo test-bogus.t >> anothertest $ rt --test-list=onlytest --test-list=anothertest running 2 tests using 1 parallel processes s. Skipped test-bogus.t: Doesn't exist # Ran 1 tests, 1 skipped, 0 failed. $ rm onlytest anothertest test for --json ================== $ rt --json running 3 tests using 1 parallel processes --- $TESTTMP/test-failure.t +++ $TESTTMP/test-failure.t.err @@ -1,5 +1,5 @@ $ echo babar - rataxes + babar This is a noop statement so that this test is still more bytes than success. pad pad pad pad............................................................ ERROR: test-failure.t output changed !.s Skipped test-skip.t: missing feature: nail clipper Failed test-failure.t: output changed # Ran 2 tests, 1 skipped, 1 failed. python hash seed: * (glob) [1] $ cat report.json testreport ={ "test-failure.t": [\{] (re) "csys": "\s*\d+\.\d{3,4}", ? (re) "cuser": "\s*\d+\.\d{3,4}", ? (re) "diff": "---.+\+\+\+.+", ? (re) "end": "\s*\d+\.\d{3,4}", ? (re) "result": "failure", ? (re) "start": "\s*\d+\.\d{3,4}", ? (re) "time": "\s*\d+\.\d{3,4}" (re) }, ? (re) "test-skip.t": { "csys": "\s*\d+\.\d{3,4}", ? (re) "cuser": "\s*\d+\.\d{3,4}", ? (re) "diff": "", ? (re) "end": "\s*\d+\.\d{3,4}", ? (re) "result": "skip", ? (re) "start": "\s*\d+\.\d{3,4}", ? (re) "time": "\s*\d+\.\d{3,4}" (re) }, ? (re) "test-success.t": [\{] (re) "csys": "\s*\d+\.\d{3,4}", ? (re) "cuser": "\s*\d+\.\d{3,4}", ? (re) "diff": "", ? (re) "end": "\s*\d+\.\d{3,4}", ? (re) "result": "success", ? (re) "start": "\s*\d+\.\d{3,4}", ? (re) "time": "\s*\d+\.\d{3,4}" (re) } } (no-eol) --json with --outputdir $ rm report.json $ rm -r output $ mkdir output $ rt --json --outputdir output running 3 tests using 1 parallel processes --- $TESTTMP/test-failure.t +++ $TESTTMP/output/test-failure.t.err @@ -1,5 +1,5 @@ $ echo babar - rataxes + babar This is a noop statement so that this test is still more bytes than success. pad pad pad pad............................................................ ERROR: test-failure.t output changed !.s Skipped test-skip.t: missing feature: nail clipper Failed test-failure.t: output changed # Ran 2 tests, 1 skipped, 1 failed. python hash seed: * (glob) [1] $ f report.json report.json: file not found $ cat output/report.json testreport ={ "test-failure.t": [\{] (re) "csys": "\s*\d+\.\d{3,4}", ? (re) "cuser": "\s*\d+\.\d{3,4}", ? (re) "diff": "---.+\+\+\+.+", ? (re) "end": "\s*\d+\.\d{3,4}", ? (re) "result": "failure", ? (re) "start": "\s*\d+\.\d{3,4}", ? (re) "time": "\s*\d+\.\d{3,4}" (re) }, ? (re) "test-skip.t": { "csys": "\s*\d+\.\d{3,4}", ? (re) "cuser": "\s*\d+\.\d{3,4}", ? (re) "diff": "", ? (re) "end": "\s*\d+\.\d{3,4}", ? (re) "result": "skip", ? (re) "start": "\s*\d+\.\d{3,4}", ? (re) "time": "\s*\d+\.\d{3,4}" (re) }, ? (re) "test-success.t": [\{] (re) "csys": "\s*\d+\.\d{3,4}", ? (re) "cuser": "\s*\d+\.\d{3,4}", ? (re) "diff": "", ? (re) "end": "\s*\d+\.\d{3,4}", ? (re) "result": "success", ? (re) "start": "\s*\d+\.\d{3,4}", ? (re) "time": "\s*\d+\.\d{3,4}" (re) } } (no-eol) $ ls -a output . .. .testtimes report.json test-failure.t.err Test that failed test accepted through interactive are properly reported: $ cp test-failure.t backup $ echo y | rt --json -i running 3 tests using 1 parallel processes --- $TESTTMP/test-failure.t +++ $TESTTMP/test-failure.t.err @@ -1,5 +1,5 @@ $ echo babar - rataxes + babar This is a noop statement so that this test is still more bytes than success. pad pad pad pad............................................................ Accept this change? [n] ..s Skipped test-skip.t: missing feature: nail clipper # Ran 2 tests, 1 skipped, 0 failed. $ cat report.json testreport ={ "test-failure.t": [\{] (re) "csys": "\s*\d+\.\d{3,4}", ? (re) "cuser": "\s*\d+\.\d{3,4}", ? (re) "diff": "", ? (re) "end": "\s*\d+\.\d{3,4}", ? (re) "result": "success", ? (re) "start": "\s*\d+\.\d{3,4}", ? (re) "time": "\s*\d+\.\d{3,4}" (re) }, ? (re) "test-skip.t": { "csys": "\s*\d+\.\d{3,4}", ? (re) "cuser": "\s*\d+\.\d{3,4}", ? (re) "diff": "", ? (re) "end": "\s*\d+\.\d{3,4}", ? (re) "result": "skip", ? (re) "start": "\s*\d+\.\d{3,4}", ? (re) "time": "\s*\d+\.\d{3,4}" (re) }, ? (re) "test-success.t": [\{] (re) "csys": "\s*\d+\.\d{3,4}", ? (re) "cuser": "\s*\d+\.\d{3,4}", ? (re) "diff": "", ? (re) "end": "\s*\d+\.\d{3,4}", ? (re) "result": "success", ? (re) "start": "\s*\d+\.\d{3,4}", ? (re) "time": "\s*\d+\.\d{3,4}" (re) } } (no-eol) $ mv backup test-failure.t backslash on end of line with glob matching is handled properly $ cat > test-glob-backslash.t << EOF > $ echo 'foo bar \\' > foo * \ (glob) > EOF $ rt test-glob-backslash.t running 1 tests using 1 parallel processes . # Ran 1 tests, 0 skipped, 0 failed. $ rm -f test-glob-backslash.t Test globbing of local IP addresses $ echo 172.16.18.1 $LOCALIP (glob) $ echo dead:beef::1 $LOCALIP (glob) Add support for external test formatter ======================================= $ CUSTOM_TEST_RESULT=basic_test_result "$PYTHON" $TESTDIR/run-tests.py --with-hg=`which hg` -j1 "$@" test-success.t test-failure.t running 2 tests using 1 parallel processes # Ran 2 tests, 0 skipped, 0 failed. ON_START! <__main__.TestSuite tests=[<__main__.TTest testMethod=test-failure.t>, <__main__.TTest testMethod=test-success.t>]> FAILURE! test-failure.t output changed SUCCESS! test-success.t ON_END! Test reusability for third party tools ====================================== $ mkdir "$TESTTMP"/anothertests $ cd "$TESTTMP"/anothertests test that `run-tests.py` can execute hghave, even if it runs not in Mercurial source tree. $ cat > test-hghave.t <<EOF > #require true > $ echo foo > foo > EOF $ rt test-hghave.t running 1 tests using 1 parallel processes . # Ran 1 tests, 0 skipped, 0 failed. test that RUNTESTDIR refers the directory, in which `run-tests.py` now running is placed. $ cat > test-runtestdir.t <<EOF > - $TESTDIR, in which test-run-tests.t is placed > - \$TESTDIR, in which test-runtestdir.t is placed (expanded at runtime) > - \$RUNTESTDIR, in which run-tests.py is placed (expanded at runtime) > > #if windows > $ test "\$TESTDIR" = "$TESTTMP\anothertests" > #else > $ test "\$TESTDIR" = "$TESTTMP"/anothertests > #endif > If this prints a path, that means RUNTESTDIR didn't equal > TESTDIR as it should have. > $ test "\$RUNTESTDIR" = "$TESTDIR" || echo "\$RUNTESTDIR" > This should print the start of check-code. If this passes but the > previous check failed, that means we found a copy of check-code at whatever > RUNTESTSDIR ended up containing, even though it doesn't match TESTDIR. > $ head -n 3 "\$RUNTESTDIR"/../contrib/check-code.py | sed 's@.!.*python@#!USRBINENVPY@' > #!USRBINENVPY > # > # check-code - a style and portability checker for Mercurial > EOF $ rt test-runtestdir.t running 1 tests using 1 parallel processes . # Ran 1 tests, 0 skipped, 0 failed. #if execbit test that TESTDIR is referred in PATH $ cat > custom-command.sh <<EOF > #!/bin/sh > echo "hello world" > EOF $ chmod +x custom-command.sh $ cat > test-testdir-path.t <<EOF > $ custom-command.sh > hello world > EOF $ rt test-testdir-path.t running 1 tests using 1 parallel processes . # Ran 1 tests, 0 skipped, 0 failed. #endif test support for --allow-slow-tests $ cat > test-very-slow-test.t <<EOF > #require slow > $ echo pass > pass > EOF $ rt test-very-slow-test.t running 1 tests using 1 parallel processes s Skipped test-very-slow-test.t: missing feature: allow slow tests (use --allow-slow-tests) # Ran 0 tests, 1 skipped, 0 failed. $ rt $HGTEST_RUN_TESTS_PURE --allow-slow-tests test-very-slow-test.t running 1 tests using 1 parallel processes . # Ran 1 tests, 0 skipped, 0 failed. support for running a test outside the current directory $ mkdir nonlocal $ cat > nonlocal/test-is-not-here.t << EOF > $ echo pass > pass > EOF $ rt nonlocal/test-is-not-here.t running 1 tests using 1 parallel processes . # Ran 1 tests, 0 skipped, 0 failed. support for automatically discovering test if arg is a folder $ mkdir tmp && cd tmp $ cat > test-uno.t << EOF > $ echo line > line > EOF $ cp test-uno.t test-dos.t $ cd .. $ cp -R tmp tmpp $ cp tmp/test-uno.t test-solo.t $ rt tmp/ test-solo.t tmpp running 5 tests using 1 parallel processes ..... # Ran 5 tests, 0 skipped, 0 failed. $ rm -rf tmp tmpp support for running run-tests.py from another directory $ mkdir tmp && cd tmp $ cat > useful-file.sh << EOF > important command > EOF $ cat > test-folder.t << EOF > $ cat \$TESTDIR/useful-file.sh > important command > EOF $ cat > test-folder-fail.t << EOF > $ cat \$TESTDIR/useful-file.sh > important commando > EOF $ cd .. $ rt tmp/test-*.t running 2 tests using 1 parallel processes --- $TESTTMP/anothertests/tmp/test-folder-fail.t +++ $TESTTMP/anothertests/tmp/test-folder-fail.t.err @@ -1,2 +1,2 @@ $ cat $TESTDIR/useful-file.sh - important commando + important command ERROR: test-folder-fail.t output changed !. Failed test-folder-fail.t: output changed # Ran 2 tests, 0 skipped, 1 failed. python hash seed: * (glob) [1] support for bisecting failed tests automatically $ hg init bisect $ cd bisect $ cat >> test-bisect.t <<EOF > $ echo pass > pass > EOF $ hg add test-bisect.t $ hg ci -m 'good' $ cat >> test-bisect.t <<EOF > $ echo pass > fail > EOF $ hg ci -m 'bad' $ rt --known-good-rev=0 test-bisect.t running 1 tests using 1 parallel processes --- $TESTTMP/anothertests/bisect/test-bisect.t +++ $TESTTMP/anothertests/bisect/test-bisect.t.err @@ -1,4 +1,4 @@ $ echo pass pass $ echo pass - fail + pass ERROR: test-bisect.t output changed ! Failed test-bisect.t: output changed test-bisect.t broken by 72cbf122d116 (bad) # Ran 1 tests, 0 skipped, 1 failed. python hash seed: * (glob) [1] $ cd .. support bisecting a separate repo $ hg init bisect-dependent $ cd bisect-dependent $ cat > test-bisect-dependent.t <<EOF > $ tail -1 \$TESTDIR/../bisect/test-bisect.t > pass > EOF $ hg commit -Am dependent test-bisect-dependent.t $ rt --known-good-rev=0 test-bisect-dependent.t running 1 tests using 1 parallel processes --- $TESTTMP/anothertests/bisect-dependent/test-bisect-dependent.t +++ $TESTTMP/anothertests/bisect-dependent/test-bisect-dependent.t.err @@ -1,2 +1,2 @@ $ tail -1 $TESTDIR/../bisect/test-bisect.t - pass + fail ERROR: test-bisect-dependent.t output changed ! Failed test-bisect-dependent.t: output changed Failed to identify failure point for test-bisect-dependent.t # Ran 1 tests, 0 skipped, 1 failed. python hash seed: * (glob) [1] $ rt --bisect-repo=../test-bisect test-bisect-dependent.t usage: run-tests.py [options] [tests] run-tests.py: error: --bisect-repo cannot be used without --known-good-rev [2] $ rt --known-good-rev=0 --bisect-repo=../bisect test-bisect-dependent.t running 1 tests using 1 parallel processes --- $TESTTMP/anothertests/bisect-dependent/test-bisect-dependent.t +++ $TESTTMP/anothertests/bisect-dependent/test-bisect-dependent.t.err @@ -1,2 +1,2 @@ $ tail -1 $TESTDIR/../bisect/test-bisect.t - pass + fail ERROR: test-bisect-dependent.t output changed ! Failed test-bisect-dependent.t: output changed test-bisect-dependent.t broken by 72cbf122d116 (bad) # Ran 1 tests, 0 skipped, 1 failed. python hash seed: * (glob) [1] $ cd .. Test a broken #if statement doesn't break run-tests threading. ============================================================== $ mkdir broken $ cd broken $ cat > test-broken.t <<EOF > true > #if notarealhghavefeature > $ false > #endif > EOF $ for f in 1 2 3 4 ; do > cat > test-works-$f.t <<EOF > This is test case $f > $ sleep 1 > EOF > done $ rt -j 2 running 5 tests using 2 parallel processes .... # Ran 5 tests, 0 skipped, 0 failed. skipped: unknown feature: notarealhghavefeature $ cd .. $ rm -rf broken Test cases in .t files ====================== $ mkdir cases $ cd cases $ cat > test-cases-abc.t <<'EOF' > #testcases A B C > $ V=B > #if A > $ V=A > #endif > #if C > $ V=C > #endif > $ echo $V | sed 's/A/C/' > C > #if C > $ [ $V = C ] > #endif > #if A > $ [ $V = C ] > [1] > #endif > #if no-C > $ [ $V = C ] > [1] > #endif > $ [ $V = D ] > [1] > EOF $ rt running 3 tests using 1 parallel processes . --- $TESTTMP/anothertests/cases/test-cases-abc.t +++ $TESTTMP/anothertests/cases/test-cases-abc.t#B.err @@ -7,7 +7,7 @@ $ V=C #endif $ echo $V | sed 's/A/C/' - C + B #if C $ [ $V = C ] #endif ERROR: test-cases-abc.t#B output changed !. Failed test-cases-abc.t#B: output changed # Ran 3 tests, 0 skipped, 1 failed. python hash seed: * (glob) [1] --restart works $ rt --restart running 2 tests using 1 parallel processes --- $TESTTMP/anothertests/cases/test-cases-abc.t +++ $TESTTMP/anothertests/cases/test-cases-abc.t#B.err @@ -7,7 +7,7 @@ $ V=C #endif $ echo $V | sed 's/A/C/' - C + B #if C $ [ $V = C ] #endif ERROR: test-cases-abc.t#B output changed !. Failed test-cases-abc.t#B: output changed # Ran 2 tests, 0 skipped, 1 failed. python hash seed: * (glob) [1] --restart works with outputdir $ mkdir output $ mv test-cases-abc.t#B.err output $ rt --restart --outputdir output running 2 tests using 1 parallel processes --- $TESTTMP/anothertests/cases/test-cases-abc.t +++ $TESTTMP/anothertests/cases/output/test-cases-abc.t#B.err @@ -7,7 +7,7 @@ $ V=C #endif $ echo $V | sed 's/A/C/' - C + B #if C $ [ $V = C ] #endif ERROR: test-cases-abc.t#B output changed !. Failed test-cases-abc.t#B: output changed # Ran 2 tests, 0 skipped, 1 failed. python hash seed: * (glob) [1] Test TESTCASE variable $ cat > test-cases-ab.t <<'EOF' > $ dostuff() { > > echo "In case $TESTCASE" > > } > #testcases A B > #if A > $ dostuff > In case A > #endif > #if B > $ dostuff > In case B > #endif > EOF $ rt test-cases-ab.t running 2 tests using 1 parallel processes .. # Ran 2 tests, 0 skipped, 0 failed. Support running a specific test case $ rt "test-cases-abc.t#B" running 1 tests using 1 parallel processes --- $TESTTMP/anothertests/cases/test-cases-abc.t +++ $TESTTMP/anothertests/cases/test-cases-abc.t#B.err @@ -7,7 +7,7 @@ $ V=C #endif $ echo $V | sed 's/A/C/' - C + B #if C $ [ $V = C ] #endif ERROR: test-cases-abc.t#B output changed ! Failed test-cases-abc.t#B: output changed # Ran 1 tests, 0 skipped, 1 failed. python hash seed: * (glob) [1] Support running multiple test cases in the same file $ rt test-cases-abc.t#B test-cases-abc.t#C running 2 tests using 1 parallel processes --- $TESTTMP/anothertests/cases/test-cases-abc.t +++ $TESTTMP/anothertests/cases/test-cases-abc.t#B.err @@ -7,7 +7,7 @@ $ V=C #endif $ echo $V | sed 's/A/C/' - C + B #if C $ [ $V = C ] #endif ERROR: test-cases-abc.t#B output changed !. Failed test-cases-abc.t#B: output changed # Ran 2 tests, 0 skipped, 1 failed. python hash seed: * (glob) [1] Support ignoring invalid test cases $ rt test-cases-abc.t#B test-cases-abc.t#D running 1 tests using 1 parallel processes --- $TESTTMP/anothertests/cases/test-cases-abc.t +++ $TESTTMP/anothertests/cases/test-cases-abc.t#B.err @@ -7,7 +7,7 @@ $ V=C #endif $ echo $V | sed 's/A/C/' - C + B #if C $ [ $V = C ] #endif ERROR: test-cases-abc.t#B output changed ! Failed test-cases-abc.t#B: output changed # Ran 1 tests, 0 skipped, 1 failed. python hash seed: * (glob) [1] Support running complex test cases names $ cat > test-cases-advanced-cases.t <<'EOF' > #testcases simple case-with-dashes casewith_-.chars > $ echo $TESTCASE > simple > EOF $ cat test-cases-advanced-cases.t #testcases simple case-with-dashes casewith_-.chars $ echo $TESTCASE simple $ rt test-cases-advanced-cases.t running 3 tests using 1 parallel processes --- $TESTTMP/anothertests/cases/test-cases-advanced-cases.t +++ $TESTTMP/anothertests/cases/test-cases-advanced-cases.t#case-with-dashes.err @@ -1,3 +1,3 @@ #testcases simple case-with-dashes casewith_-.chars $ echo $TESTCASE - simple + case-with-dashes ERROR: test-cases-advanced-cases.t#case-with-dashes output changed ! --- $TESTTMP/anothertests/cases/test-cases-advanced-cases.t +++ $TESTTMP/anothertests/cases/test-cases-advanced-cases.t#casewith_-.chars.err @@ -1,3 +1,3 @@ #testcases simple case-with-dashes casewith_-.chars $ echo $TESTCASE - simple + casewith_-.chars ERROR: test-cases-advanced-cases.t#casewith_-.chars output changed !. Failed test-cases-advanced-cases.t#case-with-dashes: output changed Failed test-cases-advanced-cases.t#casewith_-.chars: output changed # Ran 3 tests, 0 skipped, 2 failed. python hash seed: * (glob) [1] $ rt "test-cases-advanced-cases.t#case-with-dashes" running 1 tests using 1 parallel processes --- $TESTTMP/anothertests/cases/test-cases-advanced-cases.t +++ $TESTTMP/anothertests/cases/test-cases-advanced-cases.t#case-with-dashes.err @@ -1,3 +1,3 @@ #testcases simple case-with-dashes casewith_-.chars $ echo $TESTCASE - simple + case-with-dashes ERROR: test-cases-advanced-cases.t#case-with-dashes output changed ! Failed test-cases-advanced-cases.t#case-with-dashes: output changed # Ran 1 tests, 0 skipped, 1 failed. python hash seed: * (glob) [1] $ rt "test-cases-advanced-cases.t#casewith_-.chars" running 1 tests using 1 parallel processes --- $TESTTMP/anothertests/cases/test-cases-advanced-cases.t +++ $TESTTMP/anothertests/cases/test-cases-advanced-cases.t#casewith_-.chars.err @@ -1,3 +1,3 @@ #testcases simple case-with-dashes casewith_-.chars $ echo $TESTCASE - simple + casewith_-.chars ERROR: test-cases-advanced-cases.t#casewith_-.chars output changed ! Failed test-cases-advanced-cases.t#casewith_-.chars: output changed # Ran 1 tests, 0 skipped, 1 failed. python hash seed: * (glob) [1] Test automatic pattern replacement ================================== $ cat << EOF >> common-pattern.py > substitutions = [ > (br'foo-(.*)\\b', > br'\$XXX=\\1\$'), > (br'bar\\n', > br'\$YYY$\\n'), > ] > EOF $ cat << EOF >> test-substitution.t > $ echo foo-12 > \$XXX=12$ > $ echo foo-42 > \$XXX=42$ > $ echo bar prior > bar prior > $ echo lastbar > last\$YYY$ > $ echo foo-bar foo-baz > EOF $ rt test-substitution.t running 1 tests using 1 parallel processes --- $TESTTMP/anothertests/cases/test-substitution.t +++ $TESTTMP/anothertests/cases/test-substitution.t.err @@ -7,3 +7,4 @@ $ echo lastbar last$YYY$ $ echo foo-bar foo-baz + $XXX=bar foo-baz$ ERROR: test-substitution.t output changed ! Failed test-substitution.t: output changed # Ran 1 tests, 0 skipped, 1 failed. python hash seed: * (glob) [1] --extra-config-opt works $ cat << EOF >> test-config-opt.t > $ hg init test-config-opt > $ hg -R test-config-opt purge > EOF $ rt --extra-config-opt extensions.purge= test-config-opt.t running 1 tests using 1 parallel processes . # Ran 1 tests, 0 skipped, 0 failed. Test conditional output matching ================================ $ cat << EOF >> test-conditional-matching.t > #testcases foo bar > $ echo richtig > richtig (true !) > $ echo falsch > falsch (false !) > #if foo > $ echo arthur > arthur (bar !) > #endif > $ echo celeste > celeste (foo !) > $ echo zephir > zephir (bar !) > EOF $ rt test-conditional-matching.t running 2 tests using 1 parallel processes --- $TESTTMP/anothertests/cases/test-conditional-matching.t +++ $TESTTMP/anothertests/cases/test-conditional-matching.t#bar.err @@ -3,11 +3,13 @@ richtig (true !) $ echo falsch falsch (false !) + falsch #if foo $ echo arthur arthur \(bar !\) (re) #endif $ echo celeste celeste \(foo !\) (re) + celeste $ echo zephir zephir \(bar !\) (re) ERROR: test-conditional-matching.t#bar output changed ! --- $TESTTMP/anothertests/cases/test-conditional-matching.t +++ $TESTTMP/anothertests/cases/test-conditional-matching.t#foo.err @@ -3,11 +3,14 @@ richtig (true !) $ echo falsch falsch (false !) + falsch #if foo $ echo arthur arthur \(bar !\) (re) + arthur #endif $ echo celeste celeste \(foo !\) (re) $ echo zephir zephir \(bar !\) (re) + zephir ERROR: test-conditional-matching.t#foo output changed ! Failed test-conditional-matching.t#bar: output changed Failed test-conditional-matching.t#foo: output changed # Ran 2 tests, 0 skipped, 2 failed. python hash seed: * (glob) [1]