view tests/test-lfs-serve.t @ 36738:613954a17a25

setdiscovery: back out changeset 5cfdf6137af8 (issue5809)

As explained in the bug report, this commit caused a performance
regression. The problem occurs when the local repo has very many
heads. Before 5cfdf6137af8, we used to get the remote's list of heads
and if these heads mostly overlapped with the local repo's heads, we
would mark these common heads as common, which would greatly reduce
the size of the set of undecided nodes.

Note that a similar problem existed before 5cfdf6137af8: If the local
repo had very many heads and the server just had a few (or many heads
from a disjoint set), we would do the same kind of slow discovery as
we would with 5cfdf6137af8 in the case where local and remote repos
share a large set of common nodes.

For now, we just back out 5cfdf6137af8. We should improve the
discovery in the "local has many heads, remote has few heads" case,
but let's do that after backing this out.

Differential Revision: https://phab.mercurial-scm.org/D2643

#testcases lfsremote-on lfsremote-off
#require serve

This test splits `hg serve` with and without using the extension into separate
tests cases.  The tests are broken down as follows, where "LFS"/"No-LFS"
indicates whether or not there are commits that use an LFS file, and "D"/"E"
indicates whether or not the extension is loaded.  The "X" cases are not tested
individually, because the lfs requirement causes the process to bail early if
the extension is disabled.

.                        Server
.
.                    No-LFS        LFS
.            +----------------------------+
.            |   ||  D  |  E  |  D  |  E  |
.            |---++=======================|
.  C         | D || N/A | #1  |  X  | #4  |
.  l    No   +---++-----------------------|
.  i    LFS  | E || #2  | #2  |  X  | #5  |
.  e         +---++-----------------------|
.  n         | D ||  X  |  X  |  X  |  X  |
.  t    LFS  |---++-----------------------|
.            | E || #3  | #3  |  X  | #6  |
.            |---++-----------------------+

  $ hg init server
  $ SERVER_REQUIRES="$TESTTMP/server/.hg/requires"

Skip the experimental.changegroup3=True config.  Failure to agree on this comes
first, and causes a "ValueError: no common changegroup version" or "abort:
HTTP Error 500: Internal Server Error", if the extension is only loaded on one
side.  If that *is* enabled, the subsequent failure is "abort: missing processor
for flag '0x2000'!" if the extension is only loaded on one side (possibly also
masked by the Internal Server Error message).
  $ cat >> $HGRCPATH <<EOF
  > [lfs]
  > url=file:$TESTTMP/dummy-remote/
  > threshold=10
  > [web]
  > allow_push=*
  > push_ssl=False
  > EOF

#if lfsremote-on
  $ hg --config extensions.lfs= -R server \
  >    serve -p $HGPORT -d --pid-file=hg.pid --errorlog=$TESTTMP/errors.log
#else
  $ hg --config extensions.lfs=! -R server \
  >    serve -p $HGPORT -d --pid-file=hg.pid --errorlog=$TESTTMP/errors.log
#endif

  $ cat hg.pid >> $DAEMON_PIDS
  $ hg clone -q http://localhost:$HGPORT client
  $ grep 'lfs' client/.hg/requires $SERVER_REQUIRES
  [1]

--------------------------------------------------------------------------------
Case #1: client with non-lfs content and the extension disabled; server with
non-lfs content, and the extension enabled.

  $ cd client
  $ echo 'non-lfs' > nonlfs.txt
  $ hg ci -Aqm 'non-lfs'
  $ grep 'lfs' .hg/requires $SERVER_REQUIRES
  [1]

#if lfsremote-on

  $ hg push -q
  $ grep 'lfs' .hg/requires $SERVER_REQUIRES
  [1]

  $ hg clone -q http://localhost:$HGPORT $TESTTMP/client1_clone
  $ grep 'lfs' $TESTTMP/client1_clone/.hg/requires $SERVER_REQUIRES
  [1]

  $ hg init $TESTTMP/client1_pull
  $ hg -R $TESTTMP/client1_pull pull -q http://localhost:$HGPORT
  $ grep 'lfs' $TESTTMP/client1_pull/.hg/requires $SERVER_REQUIRES
  [1]

  $ hg identify http://localhost:$HGPORT
  d437e1d24fbd

#endif

--------------------------------------------------------------------------------
Case #2: client with non-lfs content and the extension enabled; server with
non-lfs content, and the extension state controlled by #testcases.

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > lfs =
  > EOF
  $ echo 'non-lfs' > nonlfs2.txt
  $ hg ci -Aqm 'non-lfs file with lfs client'

Since no lfs content has been added yet, the push is allowed, even when the
extension is not enabled remotely.

  $ hg push -q
  $ grep 'lfs' .hg/requires $SERVER_REQUIRES
  [1]

  $ hg clone -q http://localhost:$HGPORT $TESTTMP/client2_clone
  $ grep 'lfs' $TESTTMP/client2_clone/.hg/requires $SERVER_REQUIRES
  [1]

  $ hg init $TESTTMP/client2_pull
  $ hg -R $TESTTMP/client2_pull pull -q http://localhost:$HGPORT
  $ grep 'lfs' $TESTTMP/client2_pull/.hg/requires $SERVER_REQUIRES
  [1]

  $ hg identify http://localhost:$HGPORT
  1477875038c6

--------------------------------------------------------------------------------
Case #3: client with lfs content and the extension enabled; server with
non-lfs content, and the extension state controlled by #testcases.  The server
should have an 'lfs' requirement after it picks up its first commit with a blob.

  $ echo 'this is a big lfs file' > lfs.bin
  $ hg ci -Aqm 'lfs'
  $ grep 'lfs' .hg/requires $SERVER_REQUIRES
  .hg/requires:lfs

#if lfsremote-off
  $ hg push -q
  abort: required features are not supported in the destination: lfs
  (enable the lfs extension on the server)
  [255]
#else
  $ hg push -q
#endif
  $ grep 'lfs' .hg/requires $SERVER_REQUIRES
  .hg/requires:lfs
  $TESTTMP/server/.hg/requires:lfs (lfsremote-on !)

  $ hg clone -q http://localhost:$HGPORT $TESTTMP/client3_clone
  $ grep 'lfs' $TESTTMP/client3_clone/.hg/requires $SERVER_REQUIRES || true
  $TESTTMP/client3_clone/.hg/requires:lfs (lfsremote-on !)
  $TESTTMP/server/.hg/requires:lfs (lfsremote-on !)

  $ hg init $TESTTMP/client3_pull
  $ hg -R $TESTTMP/client3_pull pull -q http://localhost:$HGPORT
  $ grep 'lfs' $TESTTMP/client3_pull/.hg/requires $SERVER_REQUIRES || true
  $TESTTMP/client3_pull/.hg/requires:lfs (lfsremote-on !)
  $TESTTMP/server/.hg/requires:lfs (lfsremote-on !)

The difference here is the push failed above when the extension isn't
enabled on the server.
  $ hg identify http://localhost:$HGPORT
  8374dc4052cb (lfsremote-on !)
  1477875038c6 (lfsremote-off !)

Don't bother testing the lfsremote-off cases- the server won't be able
to launch if there's lfs content and the extension is disabled.

#if lfsremote-on

--------------------------------------------------------------------------------
Case #4: client with non-lfs content and the extension disabled; server with
lfs content, and the extension enabled.

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > lfs = !
  > EOF

  $ hg init $TESTTMP/client4
  $ cd $TESTTMP/client4
  $ cat >> .hg/hgrc <<EOF
  > [paths]
  > default = http://localhost:$HGPORT
  > EOF
  $ echo 'non-lfs' > nonlfs2.txt
  $ hg ci -Aqm 'non-lfs'
  $ grep 'lfs' .hg/requires $SERVER_REQUIRES
  $TESTTMP/server/.hg/requires:lfs

  $ hg push -q --force
  warning: repository is unrelated
  $ grep 'lfs' .hg/requires $SERVER_REQUIRES
  $TESTTMP/server/.hg/requires:lfs

TODO: fail more gracefully.

  $ hg clone -q http://localhost:$HGPORT $TESTTMP/client4_clone
  abort: HTTP Error 500: Internal Server Error
  [255]
  $ grep 'lfs' $TESTTMP/client4_clone/.hg/requires $SERVER_REQUIRES
  grep: $TESTTMP/client4_clone/.hg/requires: $ENOENT$
  $TESTTMP/server/.hg/requires:lfs
  [2]

TODO: fail more gracefully.

  $ hg init $TESTTMP/client4_pull
  $ hg -R $TESTTMP/client4_pull pull -q http://localhost:$HGPORT
  abort: HTTP Error 500: Internal Server Error
  [255]
  $ grep 'lfs' $TESTTMP/client4_pull/.hg/requires $SERVER_REQUIRES
  $TESTTMP/server/.hg/requires:lfs

  $ hg identify http://localhost:$HGPORT
  03b080fa9d93

--------------------------------------------------------------------------------
Case #5: client with non-lfs content and the extension enabled; server with
lfs content, and the extension enabled.

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > lfs =
  > EOF
  $ echo 'non-lfs' > nonlfs3.txt
  $ hg ci -Aqm 'non-lfs file with lfs client'

  $ hg push -q
  $ grep 'lfs' .hg/requires $SERVER_REQUIRES
  $TESTTMP/server/.hg/requires:lfs

  $ hg clone -q http://localhost:$HGPORT $TESTTMP/client5_clone
  $ grep 'lfs' $TESTTMP/client5_clone/.hg/requires $SERVER_REQUIRES
  $TESTTMP/client5_clone/.hg/requires:lfs
  $TESTTMP/server/.hg/requires:lfs

  $ hg init $TESTTMP/client5_pull
  $ hg -R $TESTTMP/client5_pull pull -q http://localhost:$HGPORT
  $ grep 'lfs' $TESTTMP/client5_pull/.hg/requires $SERVER_REQUIRES
  $TESTTMP/client5_pull/.hg/requires:lfs
  $TESTTMP/server/.hg/requires:lfs

  $ hg identify http://localhost:$HGPORT
  c729025cc5e3

--------------------------------------------------------------------------------
Case #6: client with lfs content and the extension enabled; server with
lfs content, and the extension enabled.

  $ echo 'this is another lfs file' > lfs2.txt
  $ hg ci -Aqm 'lfs file with lfs client'

  $ hg push -q
  $ grep 'lfs' .hg/requires $SERVER_REQUIRES
  .hg/requires:lfs
  $TESTTMP/server/.hg/requires:lfs

  $ hg clone -q http://localhost:$HGPORT $TESTTMP/client6_clone
  $ grep 'lfs' $TESTTMP/client6_clone/.hg/requires $SERVER_REQUIRES
  $TESTTMP/client6_clone/.hg/requires:lfs
  $TESTTMP/server/.hg/requires:lfs

  $ hg init $TESTTMP/client6_pull
  $ hg -R $TESTTMP/client6_pull pull -q http://localhost:$HGPORT
  $ grep 'lfs' $TESTTMP/client6_pull/.hg/requires $SERVER_REQUIRES
  $TESTTMP/client6_pull/.hg/requires:lfs
  $TESTTMP/server/.hg/requires:lfs

  $ hg identify http://localhost:$HGPORT
  d3b84d50eacb

--------------------------------------------------------------------------------
Misc: process dies early if a requirement exists and the extension is disabled

  $ hg --config extensions.lfs=! summary
  abort: repository requires features unknown to this Mercurial: lfs!
  (see https://mercurial-scm.org/wiki/MissingRequirement for more information)
  [255]

#endif

  $ $PYTHON $TESTDIR/killdaemons.py $DAEMON_PIDS

#if lfsremote-on
  $ cat $TESTTMP/errors.log | grep '^[A-Z]'
  Traceback (most recent call last):
  ValueError: no common changegroup version
  Traceback (most recent call last):
  ValueError: no common changegroup version
#else
  $ cat $TESTTMP/errors.log
#endif