context: skip path conflicts by default when clearing unknown file (issue5776)
Prior to adding path conflict checking in 989e884d1be9, the test-audit-path.t
tests failed as shown here (but it was globbed away). 989e884d1be9 made it fail
with a message about the destination manifest containing a conflict (though the
no-symlink case wasn't updated). When the path conflict checking was gated
behind an experimental config in 2a774cae3a03^::2a774cae3a03, the update started
erroneously succeeding here. It turns out that the child of 989e884d1be9 is the
origin of this change when path conflict checking is disabled, as shown by
grafting the experimental config range on top of it.
What's happening here is merge.batchget() is writing the symlink 'back' to wdir
(but as a regular file for the no-symlink case), and then tries to write
'back/test', but calls wctx['back/test'].clearunknown() first. The code that's
gated here was removing the newly written 'back' file, allowing 'back/test' to
succeed. I tried checking for the dir components of 'back/test' in dirstate,
and skipping removal if present. But that didn't work because the dirstate
isn't updated after each file is written out.
This is the last persistent test failure on Windows, so the testbot should start
turning green now. \o/
#require icasefs
################################
test for branch merging
################################
test for rename awareness of case-folding collision check:
(1) colliding file is one renamed from collided file:
this is also case for issue3370.
$ hg init branch_merge_renaming
$ cd branch_merge_renaming
$ echo a > a
$ hg add a
$ echo b > b
$ hg add b
$ hg commit -m '#0'
$ hg tag -l A
$ hg rename a tmp
$ hg rename tmp A
$ hg commit -m '#1'
$ hg tag -l B
$ hg update -q 0
$ touch x
$ hg add x
$ hg commit -m '#2'
created new head
$ hg tag -l C
$ hg merge -q
$ hg status -A
M A
R a
C b
C x
$ hg update -q --clean 1
$ hg merge -q
$ hg status -A
M x
C A
C b
$ hg commit -m '(D)'
$ hg tag -l D
additional test for issue3452:
| this assumes the history below.
|
| (A) -- (C) -- (E) -------
| \ \ \
| \ \ \
| (B) -- (D) -- (F) -- (G)
|
| A: add file 'a'
| B: rename from 'a' to 'A'
| C: add 'x' (or operation other than modification of 'a')
| D: merge C into B
| E: modify 'a'
| F: modify 'A'
| G: merge E into F
|
| issue3452 occurs when (B) is recorded before (C)
$ hg update -q --clean C
$ echo "modify 'a' at (E)" > a
$ echo "modify 'b' at (E)" > b
$ hg commit -m '(E)'
created new head
$ hg tag -l E
$ hg update -q --clean D
$ echo "modify 'A' at (F)" > A
$ hg commit -m '(F)'
$ hg tag -l F
$ hg merge -q --tool internal:other E
$ hg status -A
M A
a
M b
C x
$ cat A
modify 'a' at (E)
test also the case that (B) is recorded after (C), to prevent
regression by changes in the future.
to avoid unexpected (successful) behavior by filelog unification,
target file is not 'a'/'A' but 'b'/'B' in this case.
$ hg update -q --clean A
$ hg rename b tmp
$ hg rename tmp B
$ hg commit -m '(B1)'
created new head
$ hg tag -l B1
$ hg merge -q C
$ hg status -A
M x
C B
C a
$ hg commit -m '(D1)'
$ hg tag -l D1
$ echo "modify 'B' at (F1)" > B
$ hg commit -m '(F1)'
$ hg tag -l F1
$ hg merge -q --tool internal:other E
$ hg status -A
M B
b
M a
C x
$ cat B
modify 'b' at (E)
$ cd ..
(2) colliding file is not related to collided file
$ hg init branch_merge_collding
$ cd branch_merge_collding
$ echo a > a
$ hg add a
$ hg commit -m '#0'
$ hg remove a
$ hg commit -m '#1'
$ echo A > A
$ hg add A
$ hg commit -m '#2'
$ hg update --clean 0
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ echo x > x
$ hg add x
$ hg commit -m '#3'
created new head
$ echo 'modified at #4' > a
$ hg commit -m '#4'
$ hg merge
abort: case-folding collision between [aA] and [Aa] (re)
[255]
$ hg parents --template '{rev}\n'
4
$ hg status -A
C a
C x
$ cat a
modified at #4
$ hg update --clean 2
1 files updated, 0 files merged, 2 files removed, 0 files unresolved
$ hg merge
abort: case-folding collision between [aA] and [Aa] (re)
[255]
$ hg parents --template '{rev}\n'
2
$ hg status -A
C A
$ cat A
A
test for deletion awareness of case-folding collision check (issue3648):
revision '#3' doesn't change 'a', so 'a' should be recognized as
safely removed in merging between #2 and #3.
$ hg update --clean 3
2 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg merge 2
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg status -A
M A
R a
C x
$ hg update --clean 2
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg merge 3
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg status -A
M x
C A
$ cd ..
Prepare for tests of directory case-folding collisions
$ hg init directory-casing
$ cd directory-casing
$ touch 0 # test: file without directory
$ mkdir 0a
$ touch 0a/f
$ mkdir aA
$ touch aA/a
$ hg ci -Aqm0
Directory/file case-folding collision:
$ hg up -q null
$ touch 00 # test: starts as '0'
$ mkdir 000 # test: starts as '0'
$ touch 000/f
$ touch Aa # test: collision with 'aA/a'
$ hg ci -Aqm1
$ hg merge 0
abort: case-folding collision between Aa and directory of aA/a
[255]
(note: no collision between 0 and 00 or 000/f)
Directory case-folding collision:
$ hg up -qC null
$ hg --config extensions.purge= purge
$ mkdir 0A0
$ touch 0A0/f # test: starts as '0a'
$ mkdir Aa
$ touch Aa/b # test: collision with 'aA/a'
$ hg ci -Aqm2
$ hg merge 0
3 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ cd ..
################################
test for linear updates
################################
test for rename awareness of case-folding collision check:
(1) colliding file is one renamed from collided file
$ hg init linearupdate_renameaware_1
$ cd linearupdate_renameaware_1
$ echo a > a
$ hg add a
$ hg commit -m '#0'
$ hg rename a tmp
$ hg rename tmp A
$ hg commit -m '#1'
$ hg update 0
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ echo 'this is added line' >> a
$ hg update 1
merging a and A to A
0 files updated, 1 files merged, 0 files removed, 0 files unresolved
$ hg status -A
M A
$ cat A
a
this is added line
$ cd ..
(2) colliding file is not related to collided file
$ hg init linearupdate_renameaware_2
$ cd linearupdate_renameaware_2
$ echo a > a
$ hg add a
$ hg commit -m '#0'
$ hg remove a
$ hg commit -m '#1'
$ echo A > A
$ hg add A
$ hg commit -m '#2'
$ hg update 0
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg parents --template '{rev}\n'
0
$ hg status -A
C a
$ cat A
a
$ hg up -qC 2
$ hg update --check 0
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg parents --template '{rev}\n'
0
$ hg status -A
C a
$ cat a
a
$ hg update --clean 2
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg parents --template '{rev}\n'
2
$ hg status -A
C A
$ cat A
A
$ cd ..
(3) colliding file is not related to collided file: added in working dir
$ hg init linearupdate_renameaware_3
$ cd linearupdate_renameaware_3
$ echo a > a
$ hg add a
$ hg commit -m '#0'
$ hg rename a b
$ hg commit -m '#1'
$ hg update 0
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ echo B > B
$ hg add B
$ hg status
A B
$ hg update
abort: case-folding collision between [bB] and [Bb] (re)
[255]
$ hg update --check
abort: uncommitted changes
[255]
$ hg update --clean
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg parents --template '{rev}\n'
1
$ hg status -A
C b
$ cat b
a
$ cd ..