context: skip path conflicts by default when clearing unknown file (issue5776)
Prior to adding path conflict checking in 989e884d1be9, the test-audit-path.t
tests failed as shown here (but it was globbed away). 989e884d1be9 made it fail
with a message about the destination manifest containing a conflict (though the
no-symlink case wasn't updated). When the path conflict checking was gated
behind an experimental config in 2a774cae3a03^::2a774cae3a03, the update started
erroneously succeeding here. It turns out that the child of 989e884d1be9 is the
origin of this change when path conflict checking is disabled, as shown by
grafting the experimental config range on top of it.
What's happening here is merge.batchget() is writing the symlink 'back' to wdir
(but as a regular file for the no-symlink case), and then tries to write
'back/test', but calls wctx['back/test'].clearunknown() first. The code that's
gated here was removing the newly written 'back' file, allowing 'back/test' to
succeed. I tried checking for the dir components of 'back/test' in dirstate,
and skipping removal if present. But that didn't work because the dirstate
isn't updated after each file is written out.
This is the last persistent test failure on Windows, so the testbot should start
turning green now. \o/
$ hg init
$ cat << EOF > a
> Small Mathematical Series.
> One
> Two
> Three
> Four
> Five
> Hop we are done.
> EOF
$ hg add a
$ hg commit -m ancestor
$ cat << EOF > a
> Small Mathematical Series.
> 1
> 2
> 3
> 4
> 5
> Hop we are done.
> EOF
$ hg commit -m branch1
$ hg co 0
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cat << EOF > a
> Small Mathematical Series.
> 1
> 2
> 3
> 6
> 8
> Hop we are done.
> EOF
$ hg commit -m branch2
created new head
$ hg merge 1
merging a
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
0 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
[1]
$ hg id
618808747361+c0c68e4fe667+ tip
$ echo "[commands]" >> $HGRCPATH
$ echo "status.verbose=true" >> $HGRCPATH
$ hg status
M a
? a.orig
# The repository is in an unfinished *merge* state.
# Unresolved merge conflicts:
#
# a
#
# To mark files as resolved: hg resolve --mark FILE
# To continue: hg commit
# To abort: hg update --clean . (warning: this will discard uncommitted changes)
$ cat a
Small Mathematical Series.
1
2
3
<<<<<<< working copy: 618808747361 - test: branch2
6
8
=======
4
5
>>>>>>> merge rev: c0c68e4fe667 - test: branch1
Hop we are done.
$ hg status --config commands.status.verbose=0
M a
? a.orig
Verify custom conflict markers
$ hg up -q --clean .
$ cat <<EOF >> .hg/hgrc
> [ui]
> mergemarkertemplate = '{author} {rev}'
> EOF
$ hg merge 1
merging a
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
0 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
[1]
$ cat a
Small Mathematical Series.
1
2
3
<<<<<<< working copy: test 2
6
8
=======
4
5
>>>>>>> merge rev: test 1
Hop we are done.
Verify line splitting of custom conflict marker which causes multiple lines
$ hg up -q --clean .
$ cat >> .hg/hgrc <<EOF
> [ui]
> mergemarkertemplate={author} {rev}\nfoo\nbar\nbaz
> EOF
$ hg -q merge 1
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
[1]
$ cat a
Small Mathematical Series.
1
2
3
<<<<<<< working copy: test 2
6
8
=======
4
5
>>>>>>> merge rev: test 1
Hop we are done.
Verify line trimming of custom conflict marker using multi-byte characters
$ hg up -q --clean .
$ $PYTHON <<EOF
> fp = open('logfile', 'wb')
> fp.write(b'12345678901234567890123456789012345678901234567890' +
> b'1234567890') # there are 5 more columns for 80 columns
>
> # 2 x 4 = 8 columns, but 3 x 4 = 12 bytes
> fp.write(u'\u3042\u3044\u3046\u3048'.encode('utf-8'))
>
> fp.close()
> EOF
$ hg add logfile
$ hg --encoding utf-8 commit --logfile logfile
$ cat >> .hg/hgrc <<EOF
> [ui]
> mergemarkertemplate={desc|firstline}
> EOF
$ hg -q --encoding utf-8 merge 1
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
[1]
$ cat a
Small Mathematical Series.
1
2
3
<<<<<<< working copy: 1234567890123456789012345678901234567890123456789012345...
6
8
=======
4
5
>>>>>>> merge rev: branch1
Hop we are done.
Verify basic conflict markers
$ hg up -q --clean 2
$ printf "\n[ui]\nmergemarkers=basic\n" >> .hg/hgrc
$ hg merge 1
merging a
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
0 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
[1]
$ cat a
Small Mathematical Series.
1
2
3
<<<<<<< working copy
6
8
=======
4
5
>>>>>>> merge rev
Hop we are done.
internal:merge3
$ hg up -q --clean .
$ hg merge 1 --tool internal:merge3
merging a
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
0 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
[1]
$ cat a
Small Mathematical Series.
<<<<<<< working copy
1
2
3
6
8
||||||| base
One
Two
Three
Four
Five
=======
1
2
3
4
5
>>>>>>> merge rev
Hop we are done.
Add some unconflicting changes on each head, to make sure we really
are merging, unlike :local and :other
$ hg up -C
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
updated to "e0693e20f496: 123456789012345678901234567890123456789012345678901234567890????"
1 other heads for branch "default"
$ printf "\n\nEnd of file\n" >> a
$ hg ci -m "Add some stuff at the end"
$ hg up -r 1
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ printf "Start of file\n\n\n" > tmp
$ cat a >> tmp
$ mv tmp a
$ hg ci -m "Add some stuff at the beginning"
Now test :merge-other and :merge-local
$ hg merge
merging a
warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
1 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
[1]
$ hg resolve --tool :merge-other a
merging a
(no more unresolved files)
$ cat a
Start of file
Small Mathematical Series.
1
2
3
6
8
Hop we are done.
End of file
$ hg up -C
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
updated to "18b51d585961: Add some stuff at the beginning"
1 other heads for branch "default"
$ hg merge --tool :merge-local
merging a
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ cat a
Start of file
Small Mathematical Series.
1
2
3
4
5
Hop we are done.
End of file