view tests/test-casecollision-merge.t @ 35121:66c5a8cf2868

lfs: import the Facebook git-lfs client extension

The purpose of this is the same as the built-in largefiles extension- to handle
huge files outside of the normal storage system, generally to keep the amount of
data cloned to a lower amount.  There are several benefits of implementing the
git-lfs protocol, instead of using the largefiles extension:

  - Bitbucket and Github support (and probably wider support in 3rd party
    hosting sites in general). [1][2]

  - The number of hg internals monkey patched are several orders of magnitude
    lower, so it will be easier to reason about and maintain.  Future commands
    will likely just work, without requiring various wrappers.

  - The "standin" files are only written to the filelog, not the disk.  That
    should avoid weird edge cases where the largefile and standin files get out
    of sync. [3]  It also avoids the occasional printing of the "hidden" standin
    file in various messages.

  - Filesets like size() will work, even if the file isn't present.  (It always
    says 41 bytes for largefiles, whether present or not.)

The only place that I see where largefiles comes out on top is that it works
with `hg serve` for simple sharing, without external infrastructure.  Getting
lfs-test-server working was a hassle, and took awhile to figure out.  Maybe we
can do something to make it work in the future.

Long term, I expect that this will be highly preferred over largefiles.  But if
we are to recommend this to largefile users, there are some UI issues to
bikeshed.  Until they are resolved, I've marked this experimental, and am not
putting a pointer to this in the largefiles help.  The (non exhaustive) list of
issues I've seen so far are:

  - It isn't sufficient to just enable the largefiles extension- you have to
    explicitly add a file with --large before it will pay attention to the
    configured sizes and patterns on future adds.  The justification being that
    once you use it, you're stuck with it.  I've seen people confused by this,
    and haven't liked it myself.  But it's also saved me a few times.  Should we
    do something like have a specific enabling config setting that must be set
    in the local repo config, so that enabling this extension in the user or
    system hgrc doesn't silently start storing lfs files?

  - The largefiles extension adds a repo requirement when the first largefile is
    committed, so that the extension must always be enabled in the future.  This
    extension is not doing that, and since I only enabled it locally to avoid
    infecting other repos, I got a cryptic error about missing flag processors
    when I cloned.  Is there no repo requirement due to shallow/narrow clone
    considerations (or other future advanced things)?

  - In the (small amount of) reading I've done about the git implementation, it
    seems that the files and sizes are stored in a tracked .gitattributes file.
    I think a tracked file for this would be extremely useful for consistency
    across developers, but this kind of touches on the tracked hgrc file
    proposal a few months back.

  - The git client can specify file patterns, not just sizes.

  - The largefiles extension has a cache directory in the local repo, but also a
    system wide one.  We should probably implement a system wide cache too, so
    that multiple clones don't have to refetch the files from the server.

  - Jun mentioned other missing features, like SSH authentication, gc, etc.

The code corresponds to c0492b73c7ef in hg-experimental. [4]  The only tweaks
are to load the extension in the tests with 'lfs=' instead of
'lfs=$TESTDIR/../hgext3rd/lfs', change the import in the *.py test to hgext
(from hgext3rd), add the 'testedwith' declaration, and mark it experimental for
now.  The infinite-push, p4fastimport, and remotefilelog tests were left behind.

The devel-warnings for unregistered config options are not corrected yet, nor
are the import check warnings.

[1] https://www.mercurial-scm.org/pipermail/mercurial/2017-November/050699.html
[2] https://bitbucket.org/site/master/issues/3843/largefiles-support-bb-3903
[3] https://bz.mercurial-scm.org/show_bug.cgi?id=5738
[4] https://bitbucket.org/facebook/hg-experimental

#require icasefs

################################
test for branch merging
################################

test for rename awareness of case-folding collision check:

(1) colliding file is one renamed from collided file:
this is also case for issue3370.

  $ hg init branch_merge_renaming
  $ cd branch_merge_renaming

  $ echo a > a
  $ hg add a
  $ echo b > b
  $ hg add b
  $ hg commit -m '#0'
  $ hg tag -l A
  $ hg rename a tmp
  $ hg rename tmp A
  $ hg commit -m '#1'
  $ hg tag -l B
  $ hg update -q 0
  $ touch x
  $ hg add x
  $ hg commit -m '#2'
  created new head
  $ hg tag -l C

  $ hg merge -q
  $ hg status -A
  M A
  R a
  C b
  C x

  $ hg update -q --clean 1
  $ hg merge -q
  $ hg status -A
  M x
  C A
  C b
  $ hg commit -m '(D)'
  $ hg tag -l D

additional test for issue3452:

| this assumes the history below.
|
|  (A) -- (C) -- (E) -------
|      \      \             \
|       \      \             \
|         (B) -- (D) -- (F) -- (G)
|
|   A: add file 'a'
|   B: rename from 'a' to 'A'
|   C: add 'x' (or operation other than modification of 'a')
|   D: merge C into B
|   E: modify 'a'
|   F: modify 'A'
|   G: merge E into F
|
| issue3452 occurs when (B) is recorded before (C)

  $ hg update -q --clean C
  $ echo "modify 'a' at (E)" > a
  $ echo "modify 'b' at (E)" > b
  $ hg commit -m '(E)'
  created new head
  $ hg tag -l E

  $ hg update -q --clean D
  $ echo "modify 'A' at (F)" > A
  $ hg commit -m '(F)'
  $ hg tag -l F

  $ hg merge -q --tool internal:other E
  $ hg status -A
  M A
    a
  M b
  C x
  $ cat A
  modify 'a' at (E)

test also the case that (B) is recorded after (C), to prevent
regression by changes in the future.

to avoid unexpected (successful) behavior by filelog unification,
target file is not 'a'/'A' but 'b'/'B' in this case.

  $ hg update -q --clean A
  $ hg rename b tmp
  $ hg rename tmp B
  $ hg commit -m '(B1)'
  created new head
  $ hg tag -l B1

  $ hg merge -q C
  $ hg status -A
  M x
  C B
  C a
  $ hg commit -m '(D1)'
  $ hg tag -l D1

  $ echo "modify 'B' at (F1)" > B
  $ hg commit -m '(F1)'
  $ hg tag -l F1

  $ hg merge -q --tool internal:other E
  $ hg status -A
  M B
    b
  M a
  C x
  $ cat B
  modify 'b' at (E)

  $ cd ..

(2) colliding file is not related to collided file

  $ hg init branch_merge_collding
  $ cd branch_merge_collding

  $ echo a > a
  $ hg add a
  $ hg commit -m '#0'
  $ hg remove a
  $ hg commit -m '#1'
  $ echo A > A
  $ hg add A
  $ hg commit -m '#2'
  $ hg update --clean 0
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo x > x
  $ hg add x
  $ hg commit -m '#3'
  created new head
  $ echo 'modified at #4' > a
  $ hg commit -m '#4'

  $ hg merge
  abort: case-folding collision between [aA] and [Aa] (re)
  [255]
  $ hg parents --template '{rev}\n'
  4
  $ hg status -A
  C a
  C x
  $ cat a
  modified at #4

  $ hg update --clean 2
  1 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ hg merge
  abort: case-folding collision between [aA] and [Aa] (re)
  [255]
  $ hg parents --template '{rev}\n'
  2
  $ hg status -A
  C A
  $ cat A
  A

test for deletion awareness of case-folding collision check (issue3648):
revision '#3' doesn't change 'a', so 'a' should be recognized as
safely removed in merging between #2 and #3.

  $ hg update --clean 3
  2 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg merge 2
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg status -A
  M A
  R a
  C x

  $ hg update --clean 2
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg merge 3
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg status -A
  M x
  C A

  $ cd ..

Prepare for tests of directory case-folding collisions

  $ hg init directory-casing
  $ cd directory-casing
  $ touch 0 # test: file without directory
  $ mkdir 0a
  $ touch 0a/f
  $ mkdir aA
  $ touch aA/a
  $ hg ci -Aqm0

Directory/file case-folding collision:

  $ hg up -q null
  $ touch 00 # test: starts as '0'
  $ mkdir 000 # test: starts as '0'
  $ touch 000/f
  $ touch Aa # test: collision with 'aA/a'
  $ hg ci -Aqm1

  $ hg merge 0
  abort: case-folding collision between Aa and directory of aA/a
  [255]
(note: no collision between 0 and 00 or 000/f)

Directory case-folding collision:

  $ hg up -qC null
  $ hg --config extensions.purge= purge
  $ mkdir 0A0
  $ touch 0A0/f # test: starts as '0a'
  $ mkdir Aa
  $ touch Aa/b # test: collision with 'aA/a'
  $ hg ci -Aqm2

  $ hg merge 0
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

  $ cd ..

################################
test for linear updates
################################

test for rename awareness of case-folding collision check:

(1) colliding file is one renamed from collided file

  $ hg init linearupdate_renameaware_1
  $ cd linearupdate_renameaware_1

  $ echo a > a
  $ hg add a
  $ hg commit -m '#0'
  $ hg rename a tmp
  $ hg rename tmp A
  $ hg commit -m '#1'

  $ hg update 0
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved

  $ echo 'this is added line' >> a
  $ hg update 1
  merging a and A to A
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  $ hg status -A
  M A
  $ cat A
  a
  this is added line

  $ cd ..

(2) colliding file is not related to collided file

  $ hg init linearupdate_renameaware_2
  $ cd linearupdate_renameaware_2

  $ echo a > a
  $ hg add a
  $ hg commit -m '#0'
  $ hg remove a
  $ hg commit -m '#1'
  $ echo A > A
  $ hg add A
  $ hg commit -m '#2'

  $ hg update 0
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg parents --template '{rev}\n'
  0
  $ hg status -A
  C a
  $ cat A
  a
  $ hg up -qC 2

  $ hg update --check 0
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg parents --template '{rev}\n'
  0
  $ hg status -A
  C a
  $ cat a
  a

  $ hg update --clean 2
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg parents --template '{rev}\n'
  2
  $ hg status -A
  C A
  $ cat A
  A

  $ cd ..

(3) colliding file is not related to collided file: added in working dir

  $ hg init linearupdate_renameaware_3
  $ cd linearupdate_renameaware_3

  $ echo a > a
  $ hg add a
  $ hg commit -m '#0'
  $ hg rename a b
  $ hg commit -m '#1'
  $ hg update 0
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved

  $ echo B > B
  $ hg add B
  $ hg status
  A B
  $ hg update
  abort: case-folding collision between [bB] and [Bb] (re)
  [255]

  $ hg update --check
  abort: uncommitted changes
  [255]

  $ hg update --clean
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg parents --template '{rev}\n'
  1
  $ hg status -A
  C b
  $ cat b
  a

  $ cd ..