Mercurial > hg-stable
view tests/test-url.py @ 35121:66c5a8cf2868
lfs: import the Facebook git-lfs client extension
The purpose of this is the same as the built-in largefiles extension- to handle
huge files outside of the normal storage system, generally to keep the amount of
data cloned to a lower amount. There are several benefits of implementing the
git-lfs protocol, instead of using the largefiles extension:
- Bitbucket and Github support (and probably wider support in 3rd party
hosting sites in general). [1][2]
- The number of hg internals monkey patched are several orders of magnitude
lower, so it will be easier to reason about and maintain. Future commands
will likely just work, without requiring various wrappers.
- The "standin" files are only written to the filelog, not the disk. That
should avoid weird edge cases where the largefile and standin files get out
of sync. [3] It also avoids the occasional printing of the "hidden" standin
file in various messages.
- Filesets like size() will work, even if the file isn't present. (It always
says 41 bytes for largefiles, whether present or not.)
The only place that I see where largefiles comes out on top is that it works
with `hg serve` for simple sharing, without external infrastructure. Getting
lfs-test-server working was a hassle, and took awhile to figure out. Maybe we
can do something to make it work in the future.
Long term, I expect that this will be highly preferred over largefiles. But if
we are to recommend this to largefile users, there are some UI issues to
bikeshed. Until they are resolved, I've marked this experimental, and am not
putting a pointer to this in the largefiles help. The (non exhaustive) list of
issues I've seen so far are:
- It isn't sufficient to just enable the largefiles extension- you have to
explicitly add a file with --large before it will pay attention to the
configured sizes and patterns on future adds. The justification being that
once you use it, you're stuck with it. I've seen people confused by this,
and haven't liked it myself. But it's also saved me a few times. Should we
do something like have a specific enabling config setting that must be set
in the local repo config, so that enabling this extension in the user or
system hgrc doesn't silently start storing lfs files?
- The largefiles extension adds a repo requirement when the first largefile is
committed, so that the extension must always be enabled in the future. This
extension is not doing that, and since I only enabled it locally to avoid
infecting other repos, I got a cryptic error about missing flag processors
when I cloned. Is there no repo requirement due to shallow/narrow clone
considerations (or other future advanced things)?
- In the (small amount of) reading I've done about the git implementation, it
seems that the files and sizes are stored in a tracked .gitattributes file.
I think a tracked file for this would be extremely useful for consistency
across developers, but this kind of touches on the tracked hgrc file
proposal a few months back.
- The git client can specify file patterns, not just sizes.
- The largefiles extension has a cache directory in the local repo, but also a
system wide one. We should probably implement a system wide cache too, so
that multiple clones don't have to refetch the files from the server.
- Jun mentioned other missing features, like SSH authentication, gc, etc.
The code corresponds to c0492b73c7ef in hg-experimental. [4] The only tweaks
are to load the extension in the tests with 'lfs=' instead of
'lfs=$TESTDIR/../hgext3rd/lfs', change the import in the *.py test to hgext
(from hgext3rd), add the 'testedwith' declaration, and mark it experimental for
now. The infinite-push, p4fastimport, and remotefilelog tests were left behind.
The devel-warnings for unregistered config options are not corrected yet, nor
are the import check warnings.
[1] https://www.mercurial-scm.org/pipermail/mercurial/2017-November/050699.html
[2] https://bitbucket.org/site/master/issues/3843/largefiles-support-bb-3903
[3] https://bz.mercurial-scm.org/show_bug.cgi?id=5738
[4] https://bitbucket.org/facebook/hg-experimental
author | Matt Harbison <matt_harbison@yahoo.com> |
---|---|
date | Tue, 14 Nov 2017 00:06:23 -0500 |
parents | 26a5d605b868 |
children | 0dcd03637d36 |
line wrap: on
line source
# coding=utf-8 from __future__ import absolute_import, print_function import doctest import os def check(a, b): if a != b: print((a, b)) def cert(cn): return {'subject': ((('commonName', cn),),)} from mercurial import ( sslutil, ) _verifycert = sslutil._verifycert # Test non-wildcard certificates check(_verifycert(cert('example.com'), 'example.com'), None) check(_verifycert(cert('example.com'), 'www.example.com'), 'certificate is for example.com') check(_verifycert(cert('www.example.com'), 'example.com'), 'certificate is for www.example.com') # Test wildcard certificates check(_verifycert(cert('*.example.com'), 'www.example.com'), None) check(_verifycert(cert('*.example.com'), 'example.com'), 'certificate is for *.example.com') check(_verifycert(cert('*.example.com'), 'w.w.example.com'), 'certificate is for *.example.com') # Test subjectAltName san_cert = {'subject': ((('commonName', 'example.com'),),), 'subjectAltName': (('DNS', '*.example.net'), ('DNS', 'example.net'))} check(_verifycert(san_cert, 'example.net'), None) check(_verifycert(san_cert, 'foo.example.net'), None) # no fallback to subject commonName when subjectAltName has DNS check(_verifycert(san_cert, 'example.com'), 'certificate is for *.example.net, example.net') # fallback to subject commonName when no DNS in subjectAltName san_cert = {'subject': ((('commonName', 'example.com'),),), 'subjectAltName': (('IP Address', '8.8.8.8'),)} check(_verifycert(san_cert, 'example.com'), None) # Avoid some pitfalls check(_verifycert(cert('*.foo'), 'foo'), 'certificate is for *.foo') check(_verifycert(cert('*o'), 'foo'), None) check(_verifycert({'subject': ()}, 'example.com'), 'no commonName or subjectAltName found in certificate') check(_verifycert(None, 'example.com'), 'no certificate received') # Unicode (IDN) certname isn't supported check(_verifycert(cert(u'\u4f8b.jp'), 'example.jp'), 'IDN in certificate not supported') # The following tests are from CPython's test_ssl.py. check(_verifycert(cert('example.com'), 'example.com'), None) check(_verifycert(cert('example.com'), 'ExAmple.cOm'), None) check(_verifycert(cert('example.com'), 'www.example.com'), 'certificate is for example.com') check(_verifycert(cert('example.com'), '.example.com'), 'certificate is for example.com') check(_verifycert(cert('example.com'), 'example.org'), 'certificate is for example.com') check(_verifycert(cert('example.com'), 'exampleXcom'), 'certificate is for example.com') check(_verifycert(cert('*.a.com'), 'foo.a.com'), None) check(_verifycert(cert('*.a.com'), 'bar.foo.a.com'), 'certificate is for *.a.com') check(_verifycert(cert('*.a.com'), 'a.com'), 'certificate is for *.a.com') check(_verifycert(cert('*.a.com'), 'Xa.com'), 'certificate is for *.a.com') check(_verifycert(cert('*.a.com'), '.a.com'), 'certificate is for *.a.com') # only match one left-most wildcard check(_verifycert(cert('f*.com'), 'foo.com'), None) check(_verifycert(cert('f*.com'), 'f.com'), None) check(_verifycert(cert('f*.com'), 'bar.com'), 'certificate is for f*.com') check(_verifycert(cert('f*.com'), 'foo.a.com'), 'certificate is for f*.com') check(_verifycert(cert('f*.com'), 'bar.foo.com'), 'certificate is for f*.com') # NULL bytes are bad, CVE-2013-4073 check(_verifycert(cert('null.python.org\x00example.org'), 'null.python.org\x00example.org'), None) check(_verifycert(cert('null.python.org\x00example.org'), 'example.org'), 'certificate is for null.python.org\x00example.org') check(_verifycert(cert('null.python.org\x00example.org'), 'null.python.org'), 'certificate is for null.python.org\x00example.org') # error cases with wildcards check(_verifycert(cert('*.*.a.com'), 'bar.foo.a.com'), 'certificate is for *.*.a.com') check(_verifycert(cert('*.*.a.com'), 'a.com'), 'certificate is for *.*.a.com') check(_verifycert(cert('*.*.a.com'), 'Xa.com'), 'certificate is for *.*.a.com') check(_verifycert(cert('*.*.a.com'), '.a.com'), 'certificate is for *.*.a.com') check(_verifycert(cert('a.*.com'), 'a.foo.com'), 'certificate is for a.*.com') check(_verifycert(cert('a.*.com'), 'a..com'), 'certificate is for a.*.com') check(_verifycert(cert('a.*.com'), 'a.com'), 'certificate is for a.*.com') # wildcard doesn't match IDNA prefix 'xn--' idna = u'püthon.python.org'.encode('idna').decode('ascii') check(_verifycert(cert(idna), idna), None) check(_verifycert(cert('x*.python.org'), idna), 'certificate is for x*.python.org') check(_verifycert(cert('xn--p*.python.org'), idna), 'certificate is for xn--p*.python.org') # wildcard in first fragment and IDNA A-labels in sequent fragments # are supported. idna = u'www*.pythön.org'.encode('idna').decode('ascii') check(_verifycert(cert(idna), u'www.pythön.org'.encode('idna').decode('ascii')), None) check(_verifycert(cert(idna), u'www1.pythön.org'.encode('idna').decode('ascii')), None) check(_verifycert(cert(idna), u'ftp.pythön.org'.encode('idna').decode('ascii')), 'certificate is for www*.xn--pythn-mua.org') check(_verifycert(cert(idna), u'pythön.org'.encode('idna').decode('ascii')), 'certificate is for www*.xn--pythn-mua.org') c = { 'notAfter': 'Jun 26 21:41:46 2011 GMT', 'subject': (((u'commonName', u'linuxfrz.org'),),), 'subjectAltName': ( ('DNS', 'linuxfr.org'), ('DNS', 'linuxfr.com'), ('othername', '<unsupported>'), ) } check(_verifycert(c, 'linuxfr.org'), None) check(_verifycert(c, 'linuxfr.com'), None) # Not a "DNS" entry check(_verifycert(c, '<unsupported>'), 'certificate is for linuxfr.org, linuxfr.com') # When there is a subjectAltName, commonName isn't used check(_verifycert(c, 'linuxfrz.org'), 'certificate is for linuxfr.org, linuxfr.com') # A pristine real-world example c = { 'notAfter': 'Dec 18 23:59:59 2011 GMT', 'subject': ( ((u'countryName', u'US'),), ((u'stateOrProvinceName', u'California'),), ((u'localityName', u'Mountain View'),), ((u'organizationName', u'Google Inc'),), ((u'commonName', u'mail.google.com'),), ), } check(_verifycert(c, 'mail.google.com'), None) check(_verifycert(c, 'gmail.com'), 'certificate is for mail.google.com') # Only commonName is considered check(_verifycert(c, 'California'), 'certificate is for mail.google.com') # Neither commonName nor subjectAltName c = { 'notAfter': 'Dec 18 23:59:59 2011 GMT', 'subject': ( ((u'countryName', u'US'),), ((u'stateOrProvinceName', u'California'),), ((u'localityName', u'Mountain View'),), ((u'organizationName', u'Google Inc'),), ), } check(_verifycert(c, 'mail.google.com'), 'no commonName or subjectAltName found in certificate') # No DNS entry in subjectAltName but a commonName c = { 'notAfter': 'Dec 18 23:59:59 2099 GMT', 'subject': ( ((u'countryName', u'US'),), ((u'stateOrProvinceName', u'California'),), ((u'localityName', u'Mountain View'),), ((u'commonName', u'mail.google.com'),), ), 'subjectAltName': (('othername', 'blabla'),), } check(_verifycert(c, 'mail.google.com'), None) # No DNS entry subjectAltName and no commonName c = { 'notAfter': 'Dec 18 23:59:59 2099 GMT', 'subject': ( ((u'countryName', u'US'),), ((u'stateOrProvinceName', u'California'),), ((u'localityName', u'Mountain View'),), ((u'organizationName', u'Google Inc'),), ), 'subjectAltName': (('othername', 'blabla'),), } check(_verifycert(c, 'google.com'), 'no commonName or subjectAltName found in certificate') # Empty cert / no cert check(_verifycert(None, 'example.com'), 'no certificate received') check(_verifycert({}, 'example.com'), 'no certificate received') # avoid denials of service by refusing more than one # wildcard per fragment. check(_verifycert({'subject': (((u'commonName', u'a*b.com'),),)}, 'axxb.com'), None) check(_verifycert({'subject': (((u'commonName', u'a*b.co*'),),)}, 'axxb.com'), 'certificate is for a*b.co*') check(_verifycert({'subject': (((u'commonName', u'a*b*.com'),),)}, 'axxbxxc.com'), 'too many wildcards in certificate DNS name: a*b*.com') def test_url(): """ >>> from mercurial.util import url This tests for edge cases in url.URL's parsing algorithm. Most of these aren't useful for documentation purposes, so they aren't part of the class's doc tests. Query strings and fragments: >>> url('http://host/a?b#c') <url scheme: 'http', host: 'host', path: 'a', query: 'b', fragment: 'c'> >>> url('http://host/a?') <url scheme: 'http', host: 'host', path: 'a'> >>> url('http://host/a#b#c') <url scheme: 'http', host: 'host', path: 'a', fragment: 'b#c'> >>> url('http://host/a#b?c') <url scheme: 'http', host: 'host', path: 'a', fragment: 'b?c'> >>> url('http://host/?a#b') <url scheme: 'http', host: 'host', path: '', query: 'a', fragment: 'b'> >>> url('http://host/?a#b', parsequery=False) <url scheme: 'http', host: 'host', path: '?a', fragment: 'b'> >>> url('http://host/?a#b', parsefragment=False) <url scheme: 'http', host: 'host', path: '', query: 'a#b'> >>> url('http://host/?a#b', parsequery=False, parsefragment=False) <url scheme: 'http', host: 'host', path: '?a#b'> IPv6 addresses: >>> url('ldap://[2001:db8::7]/c=GB?objectClass?one') <url scheme: 'ldap', host: '[2001:db8::7]', path: 'c=GB', query: 'objectClass?one'> >>> url('ldap://joe:xxx@[2001:db8::7]:80/c=GB?objectClass?one') <url scheme: 'ldap', user: 'joe', passwd: 'xxx', host: '[2001:db8::7]', port: '80', path: 'c=GB', query: 'objectClass?one'> Missing scheme, host, etc.: >>> url('://192.0.2.16:80/') <url path: '://192.0.2.16:80/'> >>> url('https://mercurial-scm.org') <url scheme: 'https', host: 'mercurial-scm.org'> >>> url('/foo') <url path: '/foo'> >>> url('bundle:/foo') <url scheme: 'bundle', path: '/foo'> >>> url('a?b#c') <url path: 'a?b', fragment: 'c'> >>> url('http://x.com?arg=/foo') <url scheme: 'http', host: 'x.com', query: 'arg=/foo'> >>> url('http://joe:xxx@/foo') <url scheme: 'http', user: 'joe', passwd: 'xxx', path: 'foo'> Just a scheme and a path: >>> url('mailto:John.Doe@example.com') <url scheme: 'mailto', path: 'John.Doe@example.com'> >>> url('a:b:c:d') <url path: 'a:b:c:d'> >>> url('aa:bb:cc:dd') <url scheme: 'aa', path: 'bb:cc:dd'> SSH examples: >>> url('ssh://joe@host//home/joe') <url scheme: 'ssh', user: 'joe', host: 'host', path: '/home/joe'> >>> url('ssh://joe:xxx@host/src') <url scheme: 'ssh', user: 'joe', passwd: 'xxx', host: 'host', path: 'src'> >>> url('ssh://joe:xxx@host') <url scheme: 'ssh', user: 'joe', passwd: 'xxx', host: 'host'> >>> url('ssh://joe@host') <url scheme: 'ssh', user: 'joe', host: 'host'> >>> url('ssh://host') <url scheme: 'ssh', host: 'host'> >>> url('ssh://') <url scheme: 'ssh'> >>> url('ssh:') <url scheme: 'ssh'> Non-numeric port: >>> url('http://example.com:dd') <url scheme: 'http', host: 'example.com', port: 'dd'> >>> url('ssh://joe:xxx@host:ssh/foo') <url scheme: 'ssh', user: 'joe', passwd: 'xxx', host: 'host', port: 'ssh', path: 'foo'> Bad authentication credentials: >>> url('http://joe@joeville:123@4:@host/a?b#c') <url scheme: 'http', user: 'joe@joeville', passwd: '123@4:', host: 'host', path: 'a', query: 'b', fragment: 'c'> >>> url('http://!*#?/@!*#?/:@host/a?b#c') <url scheme: 'http', host: '!*', fragment: '?/@!*#?/:@host/a?b#c'> >>> url('http://!*#?@!*#?:@host/a?b#c') <url scheme: 'http', host: '!*', fragment: '?@!*#?:@host/a?b#c'> >>> url('http://!*@:!*@@host/a?b#c') <url scheme: 'http', user: '!*@', passwd: '!*@', host: 'host', path: 'a', query: 'b', fragment: 'c'> File paths: >>> url('a/b/c/d.g.f') <url path: 'a/b/c/d.g.f'> >>> url('/x///z/y/') <url path: '/x///z/y/'> >>> url('/foo:bar') <url path: '/foo:bar'> >>> url('\\\\foo:bar') <url path: '\\\\foo:bar'> >>> url('./foo:bar') <url path: './foo:bar'> Non-localhost file URL: >>> u = url('file://mercurial-scm.org/foo') Traceback (most recent call last): File "<stdin>", line 1, in ? Abort: file:// URLs can only refer to localhost Empty URL: >>> u = url('') >>> u <url path: ''> >>> str(u) '' Empty path with query string: >>> str(url('http://foo/?bar')) 'http://foo/?bar' Invalid path: >>> u = url('http://foo/bar') >>> u.path = 'bar' >>> str(u) 'http://foo/bar' >>> u = url('file:/foo/bar/baz') >>> u <url scheme: 'file', path: '/foo/bar/baz'> >>> str(u) 'file:///foo/bar/baz' >>> u.localpath() '/foo/bar/baz' >>> u = url('file:///foo/bar/baz') >>> u <url scheme: 'file', path: '/foo/bar/baz'> >>> str(u) 'file:///foo/bar/baz' >>> u.localpath() '/foo/bar/baz' >>> u = url('file:///f:oo/bar/baz') >>> u <url scheme: 'file', path: 'f:oo/bar/baz'> >>> str(u) 'file:///f:oo/bar/baz' >>> u.localpath() 'f:oo/bar/baz' >>> u = url('file://localhost/f:oo/bar/baz') >>> u <url scheme: 'file', host: 'localhost', path: 'f:oo/bar/baz'> >>> str(u) 'file://localhost/f:oo/bar/baz' >>> u.localpath() 'f:oo/bar/baz' >>> u = url('file:foo/bar/baz') >>> u <url scheme: 'file', path: 'foo/bar/baz'> >>> str(u) 'file:foo/bar/baz' >>> u.localpath() 'foo/bar/baz' """ if 'TERM' in os.environ: del os.environ['TERM'] doctest.testmod(optionflags=doctest.NORMALIZE_WHITESPACE)