pull: remove inadequate use of operations records to update stepdone
The 'stepdone' set is design to be a client side mechanism. If the client used
some advanced capabilities to request necessary information (changeset,
obsmarkers, phases, etc). It marks the steps as done to avoid having a less
advanced mechanism issue a duplicated request.
So, the "stepdone.add('phases')" should be the result of a client choice,
because only the client can know it has requested all it needed to request. In
4a08cf1a2cfe this principle was broken because any phase-heads part sent by
the server to the client would declare the phases retrieval complete.
Now that there is an official phases related capability and code associated to
it. We do not need the change in 4a08cf1a2cfe anymore and we can back it out.
This brings back 'stepdone' management for 'phases' in line with the rest of
the code (including other phases handing).
Here is an example of potential misbehavior that 4a08cf1a2cfe introduced:
Imagine a server that pre-computes bundles. The bundles contains a changegroup
part and an (advisory) 'phase-heads' part. When a pull occurs, precomputed
bundled are reused if available. As the phase part is advisory it can be sent
to all clients. However they could be relevant changesets without phase
information. Either because they are already common or because they had no
precomputed bundle for them yet.
If receiving any 'phase-heads' parts disable subsequent phases re-trivial
parts, the client will not request phase data for all relevant changesets. For
example common changesets will not turn public.
# Copyright 2006, 2007 Matt Mackall <mpm@selenic.com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
'''share a common history between several working directories
Automatic Pooled Storage for Clones
-----------------------------------
When this extension is active, :hg:`clone` can be configured to
automatically share/pool storage across multiple clones. This
mode effectively converts :hg:`clone` to :hg:`clone` + :hg:`share`.
The benefit of using this mode is the automatic management of
store paths and intelligent pooling of related repositories.
The following ``share.`` config options influence this feature:
``share.pool``
Filesystem path where shared repository data will be stored. When
defined, :hg:`clone` will automatically use shared repository
storage instead of creating a store inside each clone.
``share.poolnaming``
How directory names in ``share.pool`` are constructed.
"identity" means the name is derived from the first changeset in the
repository. In this mode, different remotes share storage if their
root/initial changeset is identical. In this mode, the local shared
repository is an aggregate of all encountered remote repositories.
"remote" means the name is derived from the source repository's
path or URL. In this mode, storage is only shared if the path or URL
requested in the :hg:`clone` command matches exactly to a repository
that was cloned before.
The default naming mode is "identity."
'''
from __future__ import absolute_import
import errno
from mercurial.i18n import _
from mercurial import (
bookmarks,
commands,
error,
extensions,
hg,
registrar,
txnutil,
util,
)
repository = hg.repository
parseurl = hg.parseurl
cmdtable = {}
command = registrar.command(cmdtable)
# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'ships-with-hg-core'
@command('share',
[('U', 'noupdate', None, _('do not create a working directory')),
('B', 'bookmarks', None, _('also share bookmarks')),
('', 'relative', None, _('point to source using a relative path '
'(EXPERIMENTAL)')),
],
_('[-U] [-B] SOURCE [DEST]'),
norepo=True)
def share(ui, source, dest=None, noupdate=False, bookmarks=False,
relative=False):
"""create a new shared repository
Initialize a new repository and working directory that shares its
history (and optionally bookmarks) with another repository.
.. note::
using rollback or extensions that destroy/modify history (mq,
rebase, etc.) can cause considerable confusion with shared
clones. In particular, if two shared clones are both updated to
the same changeset, and one of them destroys that changeset
with rollback, the other clone will suddenly stop working: all
operations will fail with "abort: working directory has unknown
parent". The only known workaround is to use debugsetparents on
the broken clone to reset it to a changeset that still exists.
"""
return hg.share(ui, source, dest=dest, update=not noupdate,
bookmarks=bookmarks, relative=relative)
@command('unshare', [], '')
def unshare(ui, repo):
"""convert a shared repository to a normal one
Copy the store data to the repo and remove the sharedpath data.
"""
if not repo.shared():
raise error.Abort(_("this is not a shared repo"))
destlock = lock = None
lock = repo.lock()
try:
# we use locks here because if we race with commit, we
# can end up with extra data in the cloned revlogs that's
# not pointed to by changesets, thus causing verify to
# fail
destlock = hg.copystore(ui, repo, repo.path)
sharefile = repo.vfs.join('sharedpath')
util.rename(sharefile, sharefile + '.old')
repo.requirements.discard('shared')
repo.requirements.discard('relshared')
repo._writerequirements()
finally:
destlock and destlock.release()
lock and lock.release()
# update store, spath, svfs and sjoin of repo
repo.unfiltered().__init__(repo.baseui, repo.root)
# Wrap clone command to pass auto share options.
def clone(orig, ui, source, *args, **opts):
pool = ui.config('share', 'pool', None)
if pool:
pool = util.expandpath(pool)
opts[r'shareopts'] = {
'pool': pool,
'mode': ui.config('share', 'poolnaming', 'identity'),
}
return orig(ui, source, *args, **opts)
def extsetup(ui):
extensions.wrapfunction(bookmarks, '_getbkfile', getbkfile)
extensions.wrapfunction(bookmarks.bmstore, '_recordchange', recordchange)
extensions.wrapfunction(bookmarks.bmstore, '_writerepo', writerepo)
extensions.wrapcommand(commands.table, 'clone', clone)
def _hassharedbookmarks(repo):
"""Returns whether this repo has shared bookmarks"""
try:
shared = repo.vfs.read('shared').splitlines()
except IOError as inst:
if inst.errno != errno.ENOENT:
raise
return False
return hg.sharedbookmarks in shared
def _getsrcrepo(repo):
"""
Returns the source repository object for a given shared repository.
If repo is not a shared repository, return None.
"""
if repo.sharedpath == repo.path:
return None
if util.safehasattr(repo, 'srcrepo') and repo.srcrepo:
return repo.srcrepo
# the sharedpath always ends in the .hg; we want the path to the repo
source = repo.vfs.split(repo.sharedpath)[0]
srcurl, branches = parseurl(source)
srcrepo = repository(repo.ui, srcurl)
repo.srcrepo = srcrepo
return srcrepo
def getbkfile(orig, repo):
if _hassharedbookmarks(repo):
srcrepo = _getsrcrepo(repo)
if srcrepo is not None:
# just orig(srcrepo) doesn't work as expected, because
# HG_PENDING refers repo.root.
try:
fp, pending = txnutil.trypending(repo.root, repo.vfs,
'bookmarks')
if pending:
# only in this case, bookmark information in repo
# is up-to-date.
return fp
fp.close()
except IOError as inst:
if inst.errno != errno.ENOENT:
raise
# otherwise, we should read bookmarks from srcrepo,
# because .hg/bookmarks in srcrepo might be already
# changed via another sharing repo
repo = srcrepo
# TODO: Pending changes in repo are still invisible in
# srcrepo, because bookmarks.pending is written only into repo.
# See also https://www.mercurial-scm.org/wiki/SharedRepository
return orig(repo)
def recordchange(orig, self, tr):
# Continue with write to local bookmarks file as usual
orig(self, tr)
if _hassharedbookmarks(self._repo):
srcrepo = _getsrcrepo(self._repo)
if srcrepo is not None:
category = 'share-bookmarks'
tr.addpostclose(category, lambda tr: self._writerepo(srcrepo))
def writerepo(orig, self, repo):
# First write local bookmarks file in case we ever unshare
orig(self, repo)
if _hassharedbookmarks(self._repo):
srcrepo = _getsrcrepo(self._repo)
if srcrepo is not None:
orig(self, srcrepo)