treemanifests: remove _loadalllazy in _diff()
The benchmarks below use a similar setup as in ee7ee0c516ca and my other recent
commits. Yes, in some cases this runs in literally 5% of the time it
previously took.
before = a6f8ab53
diff --git:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 1.301 s +- 0.004 s | 1.309 s +- 0.012 s | 100.6%
m-u | | x | 1.303 s +- 0.009 s | 1.302 s +- 0.006 s | 99.9%
m-u | x | | 1.308 s +- 0.006 s | 1.309 s +- 0.007 s | 100.1%
m-u | x | x | 85.7 ms +- 0.6 ms | 86.0 ms +- 0.3 ms | 100.4%
l-d-r | | | 197.5 ms +- 0.7 ms | 197.8 ms +- 2.2 ms | 100.2%
l-d-r | | x | 199.4 ms +- 0.6 ms | 199.3 ms +- 0.9 ms | 99.9%
l-d-r | x | | 86.1 ms +- 0.5 ms | 85.8 ms +- 0.9 ms | 99.7%
l-d-r | x | x | 64.4 ms +- 0.4 ms | 64.4 ms +- 0.3 ms | 100.0%
diff -c . --git:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 236.7 ms +- 1.1 ms | 236.5 ms +- 1.3 ms | 99.9%
m-u | | x | 158.7 ms +- 1.0 ms | 128.0 ms +- 1.0 ms | 80.7% <--
m-u | x | | 239.7 ms +- 1.8 ms | 238.1 ms +- 1.5 ms | 99.3%
m-u | x | x | 132.4 ms +- 0.9 ms | 132.3 ms +- 0.6 ms | 99.9%
l-d-r | | | 81.8 ms +- 0.4 ms | 81.8 ms +- 0.3 ms | 100.0%
l-d-r | | x | 3.894 s +- 0.017 s | 193.6 ms +- 0.4 ms | 5.0% <--
l-d-r | x | | 106.9 ms +- 0.4 ms | 106.6 ms +- 0.3 ms | 99.7%
l-d-r | x | x | 182.7 ms +- 0.8 ms | 183.3 ms +- 0.9 ms | 100.3%
rebase -r . --keep -d .^^:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 5.615 s +- 0.109 s | 5.562 s +- 0.015 s | 99.1%
m-u | | x | 5.701 s +- 0.027 s | 5.715 s +- 0.023 s | 100.2%
m-u | x | | 5.572 s +- 0.128 s | 5.613 s +- 0.182 s | 100.7%
m-u | x | x | 633.3 ms +- 28.7 ms | 636.2 ms +- 13.8 ms | 100.5%
l-d-r | | | 666.4 ms +- 17.0 ms | 658.5 ms +- 9.3 ms | 98.8%
l-d-r | | x | 6.520 s +- 0.070 s | 6.505 s +- 0.026 s | 99.8%
l-d-r | x | | 279.0 ms +- 13.0 ms | 276.5 ms +- 4.7 ms | 99.1%
l-d-r | x | x | 1.636 s +- 0.058 s | 1.657 s +- 0.014 s | 101.3%
status --change . --copies:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 218.6 ms +- 1.4 ms | 217.9 ms +- 1.5 ms | 99.7%
m-u | | x | 138.5 ms +- 0.4 ms | 108.4 ms +- 0.2 ms | 78.3% <--
m-u | x | | 220.1 ms +- 1.3 ms | 219.7 ms +- 1.5 ms | 99.8%
m-u | x | x | 113.2 ms +- 0.4 ms | 112.4 ms +- 0.8 ms | 99.3%
l-d-r | | | 80.2 ms +- 0.3 ms | 80.6 ms +- 0.6 ms | 100.5%
l-d-r | | x | 3.899 s +- 0.020 s | 194.8 ms +- 4.0 ms | 5.0% <--
l-d-r | x | | 83.4 ms +- 0.8 ms | 83.2 ms +- 0.2 ms | 99.8%
l-d-r | x | x | 732.2 ms +- 4.3 ms | 194.9 ms +- 1.0 ms | 26.6% <--
status --copies:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 1.917 s +- 0.005 s | 1.914 s +- 0.004 s | 99.8%
m-u | | x | 1.909 s +- 0.012 s | 1.934 s +- 0.004 s | 101.3%
m-u | x | | 1.915 s +- 0.005 s | 1.904 s +- 0.004 s | 99.4%
m-u | x | x | 94.8 ms +- 0.3 ms | 94.7 ms +- 0.2 ms | 99.9%
l-d-r | | | 593.9 ms +- 1.2 ms | 594.6 ms +- 9.4 ms | 100.1%
l-d-r | | x | 595.2 ms +- 3.8 ms | 597.2 ms +- 2.6 ms | 100.3%
l-d-r | x | | 182.5 ms +- 1.6 ms | 182.1 ms +- 0.6 ms | 99.8%
l-d-r | x | x | 149.6 ms +- 0.9 ms | 149.1 ms +- 0.8 ms | 99.7%
update $rev^; ~/src/hg/hg{hg}/hg update $rev:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 3.121 s +- 0.007 s | 3.129 s +- 0.012 s | 100.3%
m-u | | x | 2.972 s +- 0.011 s | 2.981 s +- 0.012 s | 100.3%
m-u | x | | 3.144 s +- 0.014 s | 3.141 s +- 0.011 s | 99.9%
m-u | x | x | 312.2 ms +- 2.4 ms | 312.3 ms +- 2.1 ms | 100.0%
l-d-r | | | 444.4 ms +- 4.3 ms | 446.9 ms +- 5.3 ms | 100.6%
l-d-r | | x | 9.159 s +- 0.069 s | 9.182 s +- 0.040 s | 100.3%
l-d-r | x | | 254.6 ms +- 1.6 ms | 255.2 ms +- 1.6 ms | 100.2%
l-d-r | x | x | 1.525 s +- 0.007 s | 1.577 s +- 0.007 s | 103.4% <--?
Differential Revision: https://phab.mercurial-scm.org/D4845
$ cat >> $HGRCPATH <<EOF
> [extensions]
> rebase=
>
> [phases]
> publish=False
>
> [alias]
> tglog = log -G --template "{rev}:{phase} '{desc}' {branches}\n"
> EOF
$ hg init a
$ cd a
$ touch .hg/rebasestate
$ hg sum
parent: -1:000000000000 tip (empty repository)
branch: default
commit: (clean)
update: (current)
abort: .hg/rebasestate is incomplete
[255]
$ rm .hg/rebasestate
$ echo c1 > common
$ hg add common
$ hg ci -m C1
$ echo c2 >> common
$ hg ci -m C2
$ echo c3 >> common
$ hg ci -m C3
$ hg up -q -C 1
$ echo l1 >> extra
$ hg add extra
$ hg ci -m L1
created new head
$ sed -e 's/c2/l2/' common > common.new
$ mv common.new common
$ hg ci -m L2
$ hg phase --force --secret 2
$ hg tglog
@ 4:draft 'L2'
|
o 3:draft 'L1'
|
| o 2:secret 'C3'
|/
o 1:draft 'C2'
|
o 0:draft 'C1'
Conflicting rebase:
$ hg rebase -s 3 -d 2
rebasing 3:3163e20567cc "L1"
rebasing 4:46f0b057b5c0 "L2" (tip)
merging common
warning: conflicts while merging common! (edit, then use 'hg resolve --mark')
unresolved conflicts (see hg resolve, then hg rebase --continue)
[1]
Insert unsupported advisory merge record:
$ hg --config extensions.fakemergerecord=$TESTDIR/fakemergerecord.py fakemergerecord -x
$ hg debugmergestate
* version 2 records
local: 3e046f2ecedb793b97ed32108086edd1a162f8bc
other: 46f0b057b5c061d276b91491c22151f78698abd2
labels:
local: dest
other: source
unrecognized entry: x advisory record
file extras: common (ancestorlinknode = 3163e20567cc93074fbb7a53c8b93312e59dbf2c)
file: common (record type "F", state "u", hash 94c8c21d08740f5da9eaa38d1f175c592692f0d1)
local path: common (flags "")
ancestor path: common (node de0a666fdd9c1a0b0698b90d85064d8bd34f74b6)
other path: common (node 2f6411de53677f6f1048fef5bf888d67a342e0a5)
$ hg resolve -l
U common
Insert unsupported mandatory merge record:
$ hg --config extensions.fakemergerecord=$TESTDIR/fakemergerecord.py fakemergerecord -X
$ hg debugmergestate
* version 2 records
local: 3e046f2ecedb793b97ed32108086edd1a162f8bc
other: 46f0b057b5c061d276b91491c22151f78698abd2
labels:
local: dest
other: source
file extras: common (ancestorlinknode = 3163e20567cc93074fbb7a53c8b93312e59dbf2c)
file: common (record type "F", state "u", hash 94c8c21d08740f5da9eaa38d1f175c592692f0d1)
local path: common (flags "")
ancestor path: common (node de0a666fdd9c1a0b0698b90d85064d8bd34f74b6)
other path: common (node 2f6411de53677f6f1048fef5bf888d67a342e0a5)
unrecognized entry: X mandatory record
$ hg resolve -l
abort: unsupported merge state records: X
(see https://mercurial-scm.org/wiki/MergeStateRecords for more information)
[255]
$ hg resolve -ma
abort: unsupported merge state records: X
(see https://mercurial-scm.org/wiki/MergeStateRecords for more information)
[255]
Abort (should clear out unsupported merge state):
$ hg rebase --abort
saved backup bundle to $TESTTMP/a/.hg/strip-backup/3e046f2ecedb-6beef7d5-backup.hg
rebase aborted
$ hg debugmergestate
no merge state found
$ hg tglog
@ 4:draft 'L2'
|
o 3:draft 'L1'
|
| o 2:secret 'C3'
|/
o 1:draft 'C2'
|
o 0:draft 'C1'
Test safety for inconsistent rebase state, which may be created (and
forgotten) by Mercurial earlier than 2.7. This emulates Mercurial
earlier than 2.7 by renaming ".hg/rebasestate" temporarily.
$ hg rebase -s 3 -d 2
rebasing 3:3163e20567cc "L1"
rebasing 4:46f0b057b5c0 "L2" (tip)
merging common
warning: conflicts while merging common! (edit, then use 'hg resolve --mark')
unresolved conflicts (see hg resolve, then hg rebase --continue)
[1]
$ mv .hg/rebasestate .hg/rebasestate.back
$ hg update --quiet --clean 2
$ hg --config extensions.mq= strip --quiet "destination()"
$ mv .hg/rebasestate.back .hg/rebasestate
$ hg rebase --continue
abort: cannot continue inconsistent rebase
(use "hg rebase --abort" to clear broken state)
[255]
$ hg summary | grep '^rebase: '
rebase: (use "hg rebase --abort" to clear broken state)
$ hg rebase --abort
rebase aborted (no revision is removed, only broken state is cleared)
$ cd ..
Construct new repo:
$ hg init b
$ cd b
$ echo a > a
$ hg ci -Am A
adding a
$ echo b > b
$ hg ci -Am B
adding b
$ echo c > c
$ hg ci -Am C
adding c
$ hg up -q 0
$ echo b > b
$ hg ci -Am 'B bis'
adding b
created new head
$ echo c1 > c
$ hg ci -Am C1
adding c
$ hg phase --force --secret 1
$ hg phase --public 1
Rebase and abort without generating new changesets:
$ hg tglog
@ 4:draft 'C1'
|
o 3:draft 'B bis'
|
| o 2:secret 'C'
| |
| o 1:public 'B'
|/
o 0:public 'A'
$ hg rebase -b 4 -d 2
rebasing 3:a6484957d6b9 "B bis"
note: rebase of 3:a6484957d6b9 created no changes to commit
rebasing 4:145842775fec "C1" (tip)
merging c
warning: conflicts while merging c! (edit, then use 'hg resolve --mark')
unresolved conflicts (see hg resolve, then hg rebase --continue)
[1]
$ hg tglog
@ 4:draft 'C1'
|
o 3:draft 'B bis'
|
| @ 2:secret 'C'
| |
| o 1:public 'B'
|/
o 0:public 'A'
$ hg rebase -a
rebase aborted
$ hg tglog
@ 4:draft 'C1'
|
o 3:draft 'B bis'
|
| o 2:secret 'C'
| |
| o 1:public 'B'
|/
o 0:public 'A'
$ cd ..
rebase abort should not leave working copy in a merge state if tip-1 is public
(issue4082)
$ hg init abortpublic
$ cd abortpublic
$ echo a > a && hg ci -Aqm a
$ hg book master
$ hg book foo
$ echo b > b && hg ci -Aqm b
$ hg up -q master
$ echo c > c && hg ci -Aqm c
$ hg phase -p -r .
$ hg up -q foo
$ echo C > c && hg ci -Aqm C
$ hg log -G --template "{rev} {desc} {bookmarks}"
@ 3 C foo
|
| o 2 c master
| |
o | 1 b
|/
o 0 a
$ hg rebase -d master -r foo
rebasing 3:6c0f977a22d8 "C" (foo tip)
merging c
warning: conflicts while merging c! (edit, then use 'hg resolve --mark')
unresolved conflicts (see hg resolve, then hg rebase --continue)
[1]
$ hg rebase --abort
rebase aborted
$ hg log -G --template "{rev} {desc} {bookmarks}"
@ 3 C foo
|
| o 2 c master
| |
o | 1 b
|/
o 0 a
$ cd ..
Make sure we don't clobber changes in the working directory when the
user has somehow managed to update to a different revision (issue4009)
$ hg init noupdate
$ cd noupdate
$ hg book @
$ echo original > a
$ hg add a
$ hg commit -m a
$ echo x > b
$ hg add b
$ hg commit -m b1
$ hg up 0
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
(leaving bookmark @)
$ hg book foo
$ echo y > b
$ hg add b
$ hg commit -m b2
created new head
$ hg rebase -d @ -b foo --tool=internal:fail
rebasing 2:070cf4580bb5 "b2" (foo tip)
unresolved conflicts (see hg resolve, then hg rebase --continue)
[1]
$ mv .hg/rebasestate ./ # so we're allowed to hg up like in mercurial <2.6.3
$ hg up -C 0 # user does other stuff in the repo
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ mv rebasestate .hg/ # user upgrades to 2.7
$ echo new > a
$ hg up 1 # user gets an error saying to run hg rebase --abort
abort: rebase in progress
(use 'hg rebase --continue' or 'hg rebase --abort')
[255]
$ cat a
new
$ hg rebase --abort
rebase aborted
$ cat a
new
$ cd ..
test aborting an interrupted series (issue5084)
$ hg init interrupted
$ cd interrupted
$ touch base
$ hg add base
$ hg commit -m base
$ touch a
$ hg add a
$ hg commit -m a
$ echo 1 > a
$ hg commit -m 1
$ touch b
$ hg add b
$ hg commit -m b
$ echo 2 >> a
$ hg commit -m c
$ touch d
$ hg add d
$ hg commit -m d
$ hg co -q 1
$ hg rm a
$ hg commit -m no-a
created new head
$ hg co 0
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg log -G --template "{rev} {desc} {bookmarks}"
o 6 no-a
|
| o 5 d
| |
| o 4 c
| |
| o 3 b
| |
| o 2 1
|/
o 1 a
|
@ 0 base
$ hg --config extensions.n=$TESTDIR/failfilemerge.py rebase -s 3 -d tip
rebasing 3:3a71550954f1 "b"
rebasing 4:e80b69427d80 "c"
abort: ^C
[255]
New operations are blocked with the correct state message
$ find .hg -name '*state' -prune | sort
.hg/dirstate
.hg/merge/state
.hg/rebasestate
.hg/undo.backup.dirstate
.hg/undo.dirstate
.hg/updatestate
$ hg rebase -s 3 -d tip
abort: rebase in progress
(use 'hg rebase --continue' or 'hg rebase --abort')
[255]
$ hg up .
abort: rebase in progress
(use 'hg rebase --continue' or 'hg rebase --abort')
[255]
$ hg up -C .
abort: rebase in progress
(use 'hg rebase --continue' or 'hg rebase --abort')
[255]
$ hg graft 3
abort: rebase in progress
(use 'hg rebase --continue' or 'hg rebase --abort')
[255]
$ hg rebase --abort
saved backup bundle to $TESTTMP/interrupted/.hg/strip-backup/3d8812cf300d-93041a90-backup.hg
rebase aborted
$ hg log -G --template "{rev} {desc} {bookmarks}"
o 6 no-a
|
| o 5 d
| |
| o 4 c
| |
| o 3 b
| |
| o 2 1
|/
o 1 a
|
@ 0 base
$ hg summary
parent: 0:df4f53cec30a
base
branch: default
commit: (clean)
update: 6 new changesets (update)
phases: 7 draft
$ cd ..
On the other hand, make sure we *do* clobber changes whenever we
haven't somehow managed to update the repo to a different revision
during a rebase (issue4661)
$ hg ini yesupdate
$ cd yesupdate
$ echo "initial data" > foo.txt
$ hg add
adding foo.txt
$ hg ci -m "initial checkin"
$ echo "change 1" > foo.txt
$ hg ci -m "change 1"
$ hg up 0
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo "conflicting change 1" > foo.txt
$ hg ci -m "conflicting 1"
created new head
$ echo "conflicting change 2" > foo.txt
$ hg ci -m "conflicting 2"
$ hg rebase -d 1 --tool 'internal:fail'
rebasing 2:e4ea5cdc9789 "conflicting 1"
unresolved conflicts (see hg resolve, then hg rebase --continue)
[1]
$ hg rebase --abort
rebase aborted
$ hg summary
parent: 3:b16646383533 tip
conflicting 2
branch: default
commit: (clean)
update: 1 new changesets, 2 branch heads (merge)
phases: 4 draft
$ cd ..
test aborting a rebase succeeds after rebasing with skipped commits onto a
public changeset (issue4896)
$ hg init succeedonpublic
$ cd succeedonpublic
$ echo 'content' > root
$ hg commit -A -m 'root' -q
set up public branch
$ echo 'content' > disappear
$ hg commit -A -m 'disappear public' -q
commit will cause merge conflict on rebase
$ echo '' > root
$ hg commit -m 'remove content public' -q
$ hg phase --public
setup the draft branch that will be rebased onto public commit
$ hg up -r 0 -q
$ echo 'content' > disappear
commit will disappear
$ hg commit -A -m 'disappear draft' -q
$ echo 'addedcontADDEDentadded' > root
commit will cause merge conflict on rebase
$ hg commit -m 'add content draft' -q
$ hg rebase -d 'public()' --tool :merge -q
note: rebase of 3:0682fd3dabf5 created no changes to commit
warning: conflicts while merging root! (edit, then use 'hg resolve --mark')
unresolved conflicts (see hg resolve, then hg rebase --continue)
[1]
$ hg rebase --abort
rebase aborted
$ cd ..